REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B 4 DATE 06-01-06 RoHS Compliancy APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1. PHYSICAL DIMENSIONS 32.0 28.0 DESCRIPTION 1-2. CURRENT RATING A. @ 115 VAC..........................................10 A RMS MAX B. @ 250 VAC.........................................10 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 58.0 54.0 46.0 2.0 41.0 51.3 0.2 28.5 ± 0 .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / / / 3 8 10 20 30 45 DIF. MODE dB / / / 5 12 15 30 30 40 28.4MAX L ± 0.2 0 LABEL 55.0 R2 3.0 FREQ. MHz PANEL CUTOUT (MOUNTING FROM FRONT) L ACCORDING TO PANEL THICKNESS 0.8~2.0mm L=55.9 2.1~3.2mm L=56.2 2. ELECTRICAL SCHEMATIC L: Cx: Cy: R: 0.2mH 0.1uF 2200pF 1.0MΩ 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 882-10/016 EMI FILTER UNIT: mm REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 02-07-03 02-07-03 JJH / 02-07-03