REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B 1. PHYSICAL DIMENSIONS 1.14 3.40 APPROVED DP 1-2. CURRENT RATING A. @ 115 VAC.........................................10 A RMS MAX B. @ 250 VAC.........................................6 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.25 mA MAX B. @ 250 VAC 50Hz.............................0.45 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 1.48 R0.13 .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / / 10 15 20 25 40 45 35 DIF. MODE dB / / 6 6 40 55 50 40 40 1.575 ± 0.02 11.42 ± 0.005 0 3.05 2.96 ± 0.008 PANEL CUTOUT 1.575 ± 0.005 FREQ. MHz 0.2165 3.19 Ø0.138 1.95 DATE 06-01-06 RoHS Compliancy ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 2.91 Ø0.13 DESCRIPTION 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT FUSE HOLDER 2. ELECTRICAL SCHEMATIC CUSTOMER TRANSFORMER PRIMARIES EXTERNAL WIRING L: 1.0mH Lg: 0.12mH C1: 0.33uF C2: 3300pF R: 470kΩ Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 866-10/018 EMI FILTER UNIT: in REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 12-12-02 12-12-02 JJH / 12-12-02