HEAT SHRINK THIN WALL TUBING Qualtek Electronics QBG FLEXIBLE THIN WALL TUBING FOR FLEXIBLE GAS PIPES SHRINK RATIO 2:1 Features/Applications QBG flexible heat shrink tubing is specially designed for applications involving flexible gas pipes. Due to the physical properties of this tubing, it provides excellent protection for these flexible gas pipes. Operating temperature: -55°C to +105°C Minimum shrink temperature: 90°C Full recovery temperature: 110°C Standard color: Yellow RoHS Compliant Technical Data Property Test Method Typical Data Specific Gravity ASTM D 729 1.25 g/cm 3 Longitudinal Changes ASTM D 2671 0 to -5% Eccentricity ASTM D 2671 < 30% Tensile Strength ASTM D 2671 14MPa Elongation ASTM D 2671 > 650% After Aging Ultimate Elongation Tensile Strength 158°C, 168 hrs > 490% > 12MPa Heat Shock 250°C, 4Hhrs. No flowing or dropping Cold Bend Test ASTM D 2671 No cracking Dielectric Strength IEC 93 > 25kV / mm Volume Resistance ASTM D 2671 10 14 Ω.cm Copper Corrosion UL 224 No corrosion Copper Stability (158°C, 168 hrs.) Printability UL 224 Pass Hot stamp / Inkjet / Offset printing Very good Product Dimensions As Supplied (mm) Size (mm) Inside Diameter (min.) After Recovered (mm) Standard Packaging Inside Diameter (max.) Wall Thickness (min.) Standard Spool *(SS) (Meter) 23.0 23.0 9.5 0.65 100 27.5 27.5 12.7 0.70 50 29.0 29.0 12.7 0.70 50 33.5 33.5 16.0 0.80 50 40.5 40.5 19.0 0.80 50 51.0 51.0 25.4 0.80 50 65.0 65.0 32.5 1.27 30 76.2 77.0 38.1 1.27 30 Notes: 1. * See Part Number Guide for standard packaging codes. 2. Special sizes, packaging, colors and cut pieces are available upon request. ISO-9001 Company www.qualtekusa.com QBG-200C