6A05 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION 6A10 SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Amperes FEATURES * * * * * Low cost Low leakage Low forward voltage drop High current capability High surge current capability R-6 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.08 grams 1.0 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) .360 (9.1) .340 (8.6) .360 (9.1) DIA. .340 (8.6) 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL 6A05 6A1 6A2 6A4 6A6 6A8 6A10 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 60 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range VDC Volts IO 6.0 Amps I FSM 400 Amps CJ 150 R θJA 10 T J , T STG -65 to + 175 pF 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 6.0A DC @T A = 25 o C Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 100 o C Maximum Full Load Reverse Current Average Full Cycle .375” (9.5mm) lead length at T L = 75oC NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF IR 6A05 6A1 6A2 6A4 1.1 10 100 50 6A6 6A8 6A10 UNITS Volts uAmps uAmps 2001-5 AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( 6A05 THRU 6A10 ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 6 Single Phase Half Wave 60Hz Resistive or Inductive Load 5 Ground pane 1" x 1" Copper surface area PC BOARD Recommended PC Board Mounting 4 3 2 PC BOARD 1 0 Standard PC Board Mounting 0 20 40 60 80 100 120 140 160 180 200 AMBIENT TEMPERATURE, ( ) FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 TJ = 25 Pulse Width=300uS 1% Duty Cycle 1.0 .1 .6 PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) 100 100 10 TJ = 100 1.0 TJ = 25 .1 .01 .8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 600 500 400 300 200 TJ = 25 100 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 40 60 80 100 120 140 FIG. 5 - TYPICAL THERMAL RESISTANCE VS LEAD LENGTH FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 20 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) THERMAL RESISTANCE (¢J/W) INSTANTANEOUS FORWARD CURRENT, (A) 1000 FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 25 20 15 10 5 0 0 .1 .2 .3 .4 .5 .6 .7 .8 .9 1.0 EQUAL LEAD LENGTH TO HEAT SINK, (IN.) RECTRON