1N5391 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION 1N5399 SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.5 Amperes FEATURES * * * * Low cost Low leakage Low forward voltage drop High current capability DO-15 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.38 gram .034 (0.9) DIA. .028 (0.7) 1.0 (25.4) MIN. .300 (7.6) .230 (5.8) .140 (3.6) DIA. .104 (2.6) 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS SYMBOL 1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397 1N5398 1N5399 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 300 400 500 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 210 280 350 420 560 700 Volts VDC 50 100 200 300 400 500 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375” (9.5mm) lead length at TL = 70oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range Volts IO 1.5 Amps I FSM 50 Amps CJ 20 R θJA T J , T STG 50 -65 to + 175 pF 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.5A DC Maximum DC Reverse Current @T A = 25 oC at Rated DC Blocking Voltage @T A = 100 o C Maximum Full Load Reverse Current Average, Full Cycle o .375” (9.5mm) lead length at TL = 75 C NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF IR 1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397 1N5398 1N5399 UNITS 1.4 Volts 5.0 uAmps 50 30 uAmps 2001-5 RATING AND CHARACTERISTIC CURVES ( 1N5391 THRU 1N5399 ) FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.50 INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 1.25 1.00 .75 .50 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length .25 50 75 100 125 150 175 LEAD TEMPERATURE, ( ) .4 .2 .1 JUNCTION CAPACITANCE, (pF) 8.3ms Single Half Sine-Wave (JEDED Method) 30 20 10 0 200 100 60 40 20 10 6 4 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz TJ = 25 2 1 1 .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 4 - TYPICAL JUNCTION CAPACITANCE SURGE CURRENT 40 TJ = 25 Pulse Width=300uS 1% Duty Cycle .04 FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD 50 INSTANTANEOUS REVERSE CURRENT, (uA) PEAK FORWARD SURGE CURRENT, (A) 25 4 2 1.0 .02 .01 .6 0 0 20 10 .1 .2 .4 1.0 2 4 10 20 40 REVERSE VOLTAGE, ( V ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 20 10 TJ = 25 1.0 .1 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON 100