TVS RECTRON P6KE SEMICONDUCTOR TECHNICAL SPECIFICATION SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 1.0 WATT STEADY STATE FEATURES * * * * * * Plastic package has underwriters laboratory Glass passivated chip construction 600 watt surage capability at 1ms Excellent clamping capability Low zener impedance Fast response time DO-15 Ratings at 25 o C ambient temperature unless otherwise specified. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types P6KE6.8 thru P6KE400 Electrical characteristics apply in both direction MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) RATINGS Peak power dissipation with a 10/1000uS (NOTES 1, FIG.1) SYMBOL VALUE UNITS P PPM Minimum 600 Watts PD 5.0 Watts I FSM 100 Amps VF 3.5/5.0 Volts T J , T STG -65 to + 175 Steady state power dissipation at T L = 75oC lead lengths, .375” ( 9.5 mm ) ( NOTES 2 ) Peak forward surge current, 8.3ms single half sine wavesuperimposed on rated load( JEDEC METHOD ) ( NOTES 3 ) Maximum instantaneous forward voltage at 50A for unidirectional only ( NOTES 4 ) Operating and storage temperature range o NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 C per Fig.2. 2. Mounted on copper pad area of 1.6 X 1.6”( 40X40 mm) per Fig. 5 3. Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum. 4. VF = 3.0V max. for devices of V(BR) < 200V and VF = 5.0 Volts for devices of V(BR) > 200V. 0 C 1998-8 Back RECTRON RECTRON RECTRON RECTRON