RLA058A THRU RLA320A SIDACTOR FEATURES * * * * * * Low switching noise Low forward voltage drop High current capability High switching capability High surge capabitity High reliability DO-214AC MECHANICAL DATA * * * * * * 0.067 (1.70 ) 0.051 (1.29 ) Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Metallurgically bonded construction Mounting position: Any Weight: 0.057 gram 0.110 ( 2.79 ) 0.086 ( 2.18 ) 0.180 ( 4.57 ) 0.160 ( 4.06 ) 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.091 ( 2.31 ) 0.067 ( 1.70 ) 0.059 ( 1.50 ) 0.035 ( 0.89 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.008 ( 0.203 ) 0.004 ( 0.102 ) Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. 0.209 ( 5.31 ) 0.185 ( 4.70 ) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS Off-state Capacitance (Note 1) Peak One-Cycle Surge Current (Note 2) SYMBOL RLA058A RLA065A RLA075A CO 85 RLA160A RLA190A RLA220A RLA275A 38 I TSM RLA320A UNITS 35 pF 50 Amps ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL RLA058A RLA065A RLA075A RLA160A RLA190A RLA220A RLA275A Peak Off-state Voltage @I DRM = 5uA Switching Voltage @I S = 800mA (Note 3) VDRM VS Minimum On-state Voltage at 1.0A VT 4 Holding Current IH 150 NOTES : 1. 2. 3. 4. RLA320A UNITS 58 65 75 160 190 220 275 320 V 77 88 98 220 260 300 350 400 V Off-state capacitance is measured at 10KHz @0.3V with a DC48V bias. Surge rating test standard : 10/100uS. Vs is measured at 100V/uS. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. Volts mA 2007-09 RATING AND CHARACTERISTICS CURVES ( RLA058A THRU RLA320A ) IT IS IH IDRM -V VT VDRM VS +V IPP, PEAK PULSE CURRENT, (% IPP) +I 100 50 0 -I tr td t, TIME, (uS) FIG.1 V-I CHARACTERISTICS FIG.2 PULSE WAVE-FORM 12 2.0 10 1.8 RATIO OF I (T =25OC) H C 8 6 IH PERCENT OF VS CHANGE, (%) 14 4 2 25 C O 0 -2 -4 1.4 1.2 25 OC 1.0 0.8 0.6 0.4 -6 -8 -40 1.6 -20 0 20 40 60 80 100 120 140 160 TJ, JUNCTION TEMPERATURE, (OC) FIG.3 NORMALIZED VS CHANGE vs. JUNCTION TEMPERATURE -40 -20 0 20 40 60 80 100 120 140 160 CASE TEMPERATURE, (OC) FIG.4 NORMALIZED DC HOLDING CURRENT vs. CASE TEMPERATURE Mounting Pad Layout 0.094 MAX. (2.38 MAX.) 0.060MIN. ( 1.52 MIN.) 0.052 MAX. (1.32 MAX.) 0.220 (5.58) REF Dimensions in inches and (millimeters) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.