SURFACE MOUNT RESISTORS RoHS ü RMP Series: Higher Power, Thick Film, SMD INTRODUCTION DIMENSIONS The RMP Series is a higher power (high wattage) version of the standard RM Series Thick Film SMD Resistor. The RMP Series SMD Resistor is made with a specially formulated substraight and with an advanced process used to deposit the film. As a result power ratings can surpass standard series. D Glass Passivation TEMP. COEFFICIENT H Type Tolerance 0402 5% 1%, 5% 1%, 5% 0.1%, 0.5% Resistance Range 1W ~ 9.9 W 10W ~ 990W 1K W ~ 10MW 10W ~ 1M W 1% & 5% 1W ~ 9.9W 0603 0805 1206 1210 2010 1812 2512 1218 2030 Temp. Coeff (PPM / °C +500 ~ -200 +300 ~ -300 +200 ~ -200 +200 ~ -200 +400 ~ 400 5% 10W - 10MW +200 ~ 200 1% 0.1% & 0.5% 10W - 10MW 10W - 1MW +100 ~ 100 +100 ~ 100 W C L Type RMP04 (0402) RMP06 (0603) RMP10 (0805) RMP12 (1206) RMP25 (1210) RMP50 (2010) RMP50S (1812) RMP2W (2512) RMP2WS (1218) RMP4W (2030) * Are also available less than 1W and greater than 10 ohms. * For lower Temp. Coeff see RMT Series DERATING CURVE 1.0 1.6 2.0 3.2 3.2 5.0 4.5 6.3 3.0 5.1 L + 0.1 + 0.2 + 0.2 + 0.2 + 0.2 + 0.2 + 0.1 + 0.2 + 0.1 + 0.1 0.5 0.8 1.25 1.6 2.5 2.5 3.01 3.1 4.6 7.6 W + + + + + + + + + + 0.05 0.15 0.15 0.12 0.2 0.2 0.1 0.2 0.1 0.1 Dimensions (mm) H 0.35 + 0.05 0.20 0.50 + 0.1 0.30 0.50 + 0.15 0.40 0.60 + 0.15 0.45 0.60 + 0.15 0.50 0.60 + 0.1 0.60 0.80 + 0.1 0.55 0.65 + 0.1 0.60 0.55 + 0.05 0.45 0.60 + 0.05 0.80 C + 0.1 + 0.2 + 0.2 + 0.2 + 0.2 + 0.2 + 0.05 + 0.2 + 0.1 + 0.1 0.2 0.3 0.3 0.4 0.5 0.6 0.4 0.6 0.4 0.7 D + + + + + + + + + + 0.1 0.15 0.15 0.2 0.2 0.2 0.1 0.2 0.1 0.1 Operating Temp. Range -55°C ~ +155° 70°C Rated Load (%) 100 155°C 80 60 40 20 0 -55 -30 0 20 40 60 80 100 120 140 160 Ambient Temperature (°C) 180 RATINGS & STANDARD RANGES Power Rating Type RMP04 (0402) RMP06 (0603) RMP10 (0805) RMP12 (1206) RMP25 (1210) RMP50 (2010) RMP50S (1812) RMP2W (2512) RMP2WS (1218) RMP4W (2030) 0.1W 0.125W 0.25W 0.33W 0.66W 1W 0.66W 2W 2W 4W Max Max Working Overload Voltage Voltage 50 50 150 200 200 200 200 200 200 200 100 100 300 400 400 400 400 400 400 400 Standard Resistance Range +5% Tolerance 1 1 1 1 1 1 1 1 1 1 ~ 10MW ~ 10MW ~ 10MW ~ 10MW ~ 10MW ~ 10MW ~ 10MW ~ 10MW ~ 10MW ~ 10MW +1% Tolerance 10W ~ 1MW 1W ~ 1MW 1W ~ 1MW 1W ~ 1MW 1W ~ 1MW 1W ~ 1MW 1W ~ 1MW 1W ~ 1MW 1W ~ 1MW 1W ~ 1MW +0.1% & 0.5% Tolerance 10W ~ 10W ~ 10W ~ 10W ~ 10W ~ 10W ~ 10W ~ 10W ~ 10W ~ 1M W 1M W 1M W 1M W 1M W 1M W 1M W 1M W 1M W * For Standard Power Ratings see RM Series PART NUMBER EXAMPLE RMP 10 R - 10K - J Specifications for this series are for reference. Proper sample evaluation and approval is recommended. RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2BB07 2009.4.07