ALUMINUM ELECTROLYTIC CAPACITORS TEA Series: Axial General Purpose FEATURES •85°C, 2000 hours assured. •For general purpose applications. SPECIFICATIONS Item Performance Operating Temperature Range 6.3 ~ 250V 350V ~ 450V -40°C ~ +85°C -25°C ~ +85°C Capacitance Tolerance ± 20% (120Hz, 20°C) Rated Voltage 100V Time Leakage Current (at 20°C) >100V after 2 minutes I = 0.02CV or 3 ( Leakage Current After 5 minutes A) CV 100 Whichever is greater I = 0.03CV +15 ( Rated Voltage Dissipaton Factor at 120 Hz, 20°C Tan (max) I = 0.02CV +25 ( 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 0.23 0.20 0.17 0.15 0.12 0.10 0.09 0.08 0.12 0.14 0.17 0.20 0.25 0.25 When the capacitance exceed 1000 A) F. V = rated DC woring voltage in V. When C= rated capacitance in Tan CV >1000 A) F 0.02 shall be added every 1000 F increase. Impedance ratio shall not exceed the values given in the table below Low Temperature 6.3 10 16 25 35 50 63 100 Z(-25°C) D<16 6 4 3 3 2 2 2 2 Impedance /Z(+20°C) D>16 8 6 4 4 3 3 3 3 Ratio Z(-40°C) D<16 10 8 6 6 4 3 3 3 /Z(+20°C) D>16 18 16 12 10 8 8 6 6 Rated Voltage Characteristics (at 120Hz) Test Time Load Life Test 160 200 250 350 400 450 3 6 8 12 14 16 4 8 10 - - - 2000 Hrs Capacitance Change < ± 20% Dissipation Factor Less than 200% of specified value. Leakage Current Within specified value The above specification shall be satisfied when the capacitors are restored to 20°C after rated voltage applied for 2000 hrs at 85°C. Test Time 1000 Hrs Capacitance Change Dissipation Factor Shelf Life Test Leakage 20% Less than 200% of specified value 6.3 ~ 100V Within specified value 160 ~ 450V Less than 200% of specified value Current The above specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 1000 hrs at 85°C without voltage applied. Freq. (Hz) 120 500 1K Under 100 0.70 1.00 1.30 1.40 1.50 220 to 1000 0.75 1.00 1.20 1.30 1.35 2200 up above 0.80 1.00 1.10 1.12 1.15 Under 50 70 85 1.78 1.40 1.00 Frequency Multilpiers up Temperature (°C) Riple Current & Temperature Multipliers 10K 60 Cap. ( F) Ripple Current & Multipliers Standards Satisfies Characteristic W of JIS C 5141 LEAD SPACING AND DIAMETER D d 5 6.3 8 0.6 10 13 16 18 0.8 22 25 1.0 1.5 2.0 0.5 1.0 PART NUMBER EXAMPLE TE 101 M 1E TR 080 130 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CG01 REV 2008.2.4 ALUMINUM ELECTROLYTIC CAPACITORS TEA Series: Axial General Purpose DIMENSIONS AND PERMISSABLE RIPPLE CURRENT Dimension: D×L(mm) Ripple Current: mA/RMS at 120Hz 85°C VDC F 6.3v(0J) Code DxL 10V(1A) mA DxL 16V(1C) mA DxL 25V(1E) mA DxL 35V(1V) mA DxL 50V(1H) mA DxL 63V(1J) mA DxL mA 0.1 0R1 5 x 12 1.5 5 x 12 3 0.22 R22 5 x 12 3.5 5 x 12 4.5 0.33 R33 5 x 12 5 5 x 12 7.5 0.47 R47 5 x 12 6 5 x 12 9 1 010 5 x 12 10 5 x 12 15 2.2 2R2 5 x 12 20 5 x 12 30 3.3 3R3 5 x 12 30 5 x 12 36 4.7 4R7 5 x 12 42 5 x 12 44 10 100 22 220 33 330 5 x 12 5 x 12 55 6.3 x 13 65 6.3 x 13 68 5 x 12 71 5 x 12 76 6.3 x 13 88 6.3 x 13 96 6.3 x 13 109 78 5 x 12 88 6.3 x 13 100 6.3 x 13 115 6.3 x 13 126 8 x 13 154 47 470 5 x 12 87 5 x 12 94 6.3 x 13 111 6.3 x 13 119 6.3 x 13 138 8 x 13 174 8 x 16 214 100 101 6.3 x 13 136 6.3 x 13 145 6.3 x 13 174 8 x 13 215 8 x 16 232 10 x 17 296 10 x 17 326 220 221 6.3 x 13 215 6.3 x 13 231 8 x 13 298 8 x 16 319 10 x 17 401 10 x 21 459 13 x 22 527 330 331 8 x 16 305 8 x 16 327 8 x 16 365 10 x 17 454 10 x 21 514 13 x 22 613 13 x 22 675 470 471 8 x 16 364 8 x 16 390 8 x 16 460 10 x 17 524 10 x 21 613 13 x 22 731 13 x 27 780 1000 102 10 x 17 662 10 x 17 671 10 x 21 775 13 x 22 873 13 x 27 955 16 x 33 1111 18 x 37 1249 2200 222 13 x 22 929 13 x 22 1051 13 x 22 1125 16 x 28 1344 16 x 33 1421 18 x 36 1699 22 x 43 1744 3300 332 13 x 27 1150 13 x 27 1288 16 x 28 1454 16 x 33 1611 16 x 37 1640 22 x 43 2027 25 x 52 2309 4700 472 13 x 27 1354 16 x 28 1552 16 x 33 1650 18 x 37 1881 22 x 43 2208 25 x 43 2347 10000 103 16 x 37 2062 18 x 42 2122 22 x 43 2503 22 x 52 2893 22000 223 22 x 43 3097 F Code VDC 100V (2A) DxL 160V(2C) mA 0.1 0R1 5 x 12 3 0.22 R22 5 x 12 5 0.33 R33 5 x 12 8 0.47 R47 5 x 12 9 DxL 200V(2D) mA DxL 250V(2E) mA DxL 350V(2V) mA DxL mA 400V(2G) DxL mA 450V(2W) DxL mA 1 010 5 x 12 15 6.3 x 13 7 6.3 x 16 9 6.3 x 16 12 8 x 16 13 8 x 16 14 8 x 16 15 2.2 2R2 5 x 12 30 6.3 x 13 15 8 x 16 16 8 x 16 17 8 x 20 19 10 x 17 21 10 x 21 23 3.3 3R3 5 x 12 41 8 x 16 21 8 x 16 26 8 x 20 31 8 x 20 33 10 x 17 34 10 x 21 36 4.7 4R7 6.3 x 13 50 8 x 16 31 8 x 16 33 10 x 17 38 10 x 21 44 13 x 22 45 13 x 22 46 10 100 6.3 x 13 72 10 x 17 60 10 x 21 66 10 x 21 72 13 x 22 77 13 x 22 80 13 x 27 82 22 220 8 x 16 133 13 x 22 121 13 x 22 121 13 x 27 126 13 x 27 132 16 x 33 137 16 x 37 143 33 330 10 x 17 190 13 x 22 154 13 x 27 167 16 x 28 178 16 x 33 186 16 x 37 192 16 x 42 201 47 470 10 x 21 237 13 x 27 198 16 x 32 214 16 x 33 241 16 x 42 253 18 x 43 339 22 x 43 402 100 101 13 x 22 377 16 x 33 345 16 x 37 368 18 x 43 391 22 x 43 402 25 x 52 424 25 x 52 448 220 221 16 x 28 625 18 x 42 586 22 x 43 609 22 x 43 632 330 331 16 x 33 793 22 x 43 632 470 471 16 x 37 942 1000 102 22 x 43 1359 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CG01 REV 2008.2.4