MMIC AP410 Product Features Application • 50 ~ 3500MHz • InGaP HBT MMIC • 35dBm Output IP3 • 19.5dB Gain • 20dBm P1dB • On Chip Active bias • Pb Free / RoHS Standard • CDMA, W-CDMA Medium Power Amplifier • High Linearity Drive Amplifier Package Type: SOT-89 Description AP410 is a gain block amplifier designed with InGaP HBT MMIC in a low cost SOT-89 package. This MMIC amplifier is designed for use as driver devices for infrastructure equipment in the 50~3500MHz Wireless technologies such as Cellular, GSM, PCS CDMA, W-CDMA. Specifications PARAMETER Units Min Typ Gain (S21) dB 18 19.5 19 18.5 Input Return Loss (S11) dB -20 -21 -20 Output Return Loss (S22) dB -16 -27 -30 Output 3rd Order Intercept Point (OIP3) dBm +35 +31.5 +26.7 Output 1dB compression Point (P1dB) dBm +20 +18.7 +16.7 Noise Figure dB 5.5 5.4 5.3 DC Operating Current mA 64 50 Supply Voltage Vdc +4.8 +4.5 Thermal Resistance (Rth) ℃/W +32 70 Max 85 100 +5 Typ 140 Test Condition ① 900MHz, Vdd=5V at 25℃ ② OIP3 is measured with two tones, at an output power of +5dBm/tone separated by 1MHz. Absolute Maximum Ratings PARAMETER Rating Operating Case Temperature (℃) -40 ~ +85 Storage Temperature (℃) -50 ~ +150 Supply Voltage +6 Junction Temperature (℃) +220 Remark ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP410 Performance Charts (Vd=5V, Id=85mA, Tc=25℃) Gain vs. Frequency OIP3 vs. Frequency 45 40 20 15 10 -40℃ 25℃ 85℃ 5 OIP3(dBm) Magnitude(dB) 25 30 25 -40℃ 25℃ 85℃ 20 15 10 100 0 0 35 500 1000 1500 2000 2500 3000 3500 500 900 1900 2140 2400 2700 3000 Frequency(M Hz ) Frequency(M Hz ) Input Return Loss vs. Frequency Output Return Loss vs. Frequency 0 -5 Magnitude(dB) -10 -15 -20 -25 -30 -35 -40℃ 25℃ 85℃ -5 Magnitude(dB) -40℃ 25℃ 85℃ -40 -10 -15 -20 -25 -30 0 500 1000 1500 2000 2500 3000 3500 0 500 1000 1500 2000 2500 3000 3500 Frequency(M Hz ) Frequency(M Hz ) P1dB vs. Frequency 7 22 6 20 5 P1dB(dBm) Noise Figure(dB) Noise Figure vs. Frequency 4 3 2 18 16 14 12 1 0 100 500 900 1900 2140 Frequency(M Hz ) 2400 2700 10 100 500 900 1900 2140 2400 2700 3500 Frequency(MHz) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP410 Block Diagram Application Circuit +5V 0 L1 C3 C4 C5 C1 C2 RF Input Z=50 Z=50 L=3mm L=5mm Recommended Component Values 70MHz 500MHz-3500MHz L1 560nH C1,C2,C3 RF Output Recommended Bias Resistor Values Vsupply Rbias(5V) Rbias(4.8V) Rbias(4.5V) 100nH 6V 11 ohms 18 ohms 30 ohms 0.1uF 1000pF 7V 23 ohms 34 ohms 50 ohms C4 1000pF 0.1uF 8V 35 ohms 50 ohms 70 ohms C5 4.7uF/16V 4.7uF/16V 9V 47 ohms 65 ohms 90 ohms ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP410 Performance Charts (Vd=5V, Id=85mA, Tc=25℃) Frequency MHz 100 500 900 1900 2140 2400 2700 3500 Gain dB 20.1 20.1 19.5 17.6 17.3 16.7 16.4 14.6 S11 dB -24 -18 -20 -29 -28 -27 -27 -19 S22 dB -18 -28 -16 -12 -12 -13 -13 -14 OIP3 dBm 34 35.5 35 34.5 34.5 34.5 34.5 P1dB dBm 19.2 19.8 20.0 20.1 20.1 20.1 20.2 Noise Figure dB 5.3 5.5 5.5 5.7 5.7 5.7 5.7 OIP3 vs. Frequency OIP3(dBm) Magnitude(dB) Gain vs. Frequency 22 20 18 16 14 12 10 8 0 500 1000 1500 2000 2500 3000 3500 45 40 35 30 25 20 15 10 100 500 900 1900 2140 2400 2700 3000 Frequency(MHz) Frequency(MHz) Input Return Loss vs. Frequency Output Return Loss vs. Frequency 0 0 -6 -12 -18 -24 -30 -36 -42 Magnitude(dB) Magnitude(dB) 19.2 -8 -16 -24 -32 -40 -48 -56 0 500 1000 1500 2000 2500 3000 3500 Frequency(MHz) 0 500 1000 1500 2000 2500 3000 3500 Frequency(MHz) 70MHz Performance Typical Specifications 24 50~200MHz Gain(S21) 20dB 16 Magnitude(dB) Frequency 8 S11 0 S21 -8 S22 Return Loss(S11) -18dB Return Loss(S22) -22dB OIP3 34dBm -24 Noise Figure 5.3dB -32 P1dB 20dBm -16 50 80 110 140 Frequency(MHz) 170 200 ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP410 Performance Charts (Vd=4.8V, Id=64mA, Tc=25℃) Frequency MHz 500 880 960 1860 2140 2700 3500 Gain dB 19.7 19.1 19 17.4 16.5 15.5 14 S11 dB -13 -20 -21 -24 -22 -19 -15 S22 dB -10 -25 -27 -14 -13 -11 -8 OIP3 dBm 31 31.5 32 31 31.5 30 29 P1dB dBm 18.1 18.7 18.9 19 18.3 17.5 16.3 Noise Figure dB 5.4 5.4 5.4 5.6 5.6 5.6 5.7 S-Parameter vs. Frequency OIP3 vs. Frequency 30 40 10 30 O I P 3( d B m ) M ag n i tu d e ( d B ) 20 0 -10 -20 -30 20 10 -40 -50 500 0 500 1000 1500 2000 2500 3000 3500 F r e q u e n c y (M H z ) 1500 2000 2500 3000 3500 F r e q u e n c y (M H z ) Noise Figure vs. Frequency P1dB vs. Frequency 25 8 7 P 1d B (d B m ) N o i s e F i g ur e(d B ) 1000 6 5 4 20 15 10 3 2 500 1000 1500 2000 2500 F r e q u e n c y (M H z ) 3000 3500 5 500 1000 1500 2000 2500 3000 3500 F r e q u e n c y (M H z ) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP410 Performance Charts (Vd=4.5V, Id=50mA, Tc=25℃) Frequency MHz 500 880 960 1860 2140 2700 3500 Gain dB 18.7 18.6 18.6 17.2 15.7 14.3 13.5 S11 dB -13 -20 -21 -23 -21 -15 -14 S22 dB -10 -30 -32 -15 -14 -9 -8 OIP3 dBm 26 26.7 26.7 25.7 25.4 24.9 24.5 P1dB dBm 16 16.7 17 16.8 16.6 16.3 16.1 Noise Figure dB 5.3 5.3 5.3 5.4 5.5 5.5 5.6 S-Parameter vs. Frequency OIP3 vs. Frequency 30 40 10 O I P 3( d B m ) M ag n i tu d e ( d B ) 20 0 -10 -20 -30 30 20 10 -40 -50 500 0 500 1000 1500 2000 2500 3000 3500 F r e q u e n c y (M H z ) F r e q u e n c y (M Hz ) P1dB vs. Frequency 8 20 7 15 P 1d B ( d B m ) N o i s e F i g u r e (d B ) Noise Figure vs. Frequency 6 5 4 500 1000 1500 2000 2500 3000 F r e q u e n c y (M Hz ) 1000 1500 2000 2500 3000 3500 3500 10 5 0 500 1000 1500 2000 2500 3000 3500 F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP410 Package Dimensions (Type: SOT-89) Pin No Function 1 Input 2 Ground 3 Output/Bias 4 Ground ! ESD sensitive Observe precautions for handling, testing and packaging. Recommended Pattern Recommended Mounting Configuration RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3