MMIC AP230SO8 Product Features Application • 50 ~ 2000 MHz • GaAs MMIC • 38dBm Output IP3 • 17dB Gain • 21dBm P1dB • Single +5V Supply • CDMA,W-CDMA Medium Power Amplifier • High Linearity Drive Amplifier • 50Ω Telecommunication Systems Description Package : SOIC-8 AP230SO8 is a high linearity amplifier designed with GaAs MMIC. AP230SO8 is designed for applications such as GSM, CDMA, W-CDMA driver devices which require high IP3. AP230SO8 is in 8 pin, SOIC-8 package. ELECTRICAL CHARACTERISTICS Absolute Minimum and Maximum Ratings PARAMETER UNIT Device Voltage VDC +6 RF Input Power dBm +10 Storage Temperature ℃ MIN MAX -40 +125 Operating Ranges PARAMETER UNIT MIN Operating Frequency MHz 50 Device Voltage VDC Operational Temperature ℃ -40 PARAMETER UNIT MIN TYP Gain dB 16 17.4 Input Return Loss dB -23 Output Return Loss dB -20 Output IP3 dBm 1dB Compression Point dBm +21 Noise Figure dB 3.3 DC Current mA 250 Supply Voltage VDC +5 Thermal Resistance(Rth) ℃/W TYP MAX 2000 +5 +5.3 +85 Electrical Specifications (Ta=+25℃, VDD=+5V, Fc=880 MHz ) +36 MAX +38 270 57.5 OIP3 is measured with two tones, at an output power of 5dBm/tone separated by 1MHz ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP230SO8 Application Circuit (900MHz) S-Parameter vs. Frequency OIP3 vs. Frequency 45 10 40 0 O IP 3(d B m ) M a g n i tu d e ( d B ) 20 -10 -20 -30 -40 800 840 880 920 960 35 30 25 800 1000 840 F r e q u e n c y (M H z ) 6 20 P 1d B ( d B m ) N o i s e F i g u r e(d B ) 25 4 2 880 920 F r e q u e n c y (M H z ) 960 1000 P1dB vs. Frequency 8 840 920 F r e q u e n c y (M H z ) Noise Figure vs. Frequency 0 800 880 960 1000 15 10 5 800 840 880 920 960 1000 F r e q u e n c y (M H z ) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP230SO8 Application Circuit (1800MHz) S-Parameter vs. Frequency OIP3 vs. Frequency 20 40 35 O I P 3(d B m ) M ag n i tu d e (d B ) 10 0 -10 -20 30 25 -30 -40 1700 1740 1780 1820 1860 20 1700 1900 1740 F r e q u e n c y (M H z ) 25 6 20 P 1d B ( d B m ) N o i s e F i g ur e(d B ) 8 4 2 1740 1780 1820 F r e q u e n c y (M Hz ) 1820 1860 1900 P1dB vs. Frequency Noise Figure vs. Frequency 0 1700 1780 F r q u e n c y (M Hz ) 1860 1900 15 10 5 1700 1740 1780 1820 1860 1900 F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP230SO8 Pin Description 1 2 3 4 AMP2 AMP1 Pin No Function 8 1 RF IN(2) 7 5 RF OUT(1) 6 4 RF IN(1) 5 8 RF OUT(2) 2, 3, 6, 7 GND Exposed slug GND Package Dimensions (Type: SOIC-8) Recommended Pattern RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3