Preliminary GaN-SiC Broadband Amplifier RUP15100-10 Product Features Application • Solid-state linear amplifier design • GaN on SiC HEMT • Small and light weight • Wide Band Operation 500~2500MHz • 50 Ohm Input/Output impedance matched • Highly reliable and rugged design • Harsh environmental condition • High efficiency • 50W typical Psat • Broadband communication • Broadcasting • General purpose RF amplifier • Linear applications in the L/S Frequency Bands Description The RUP15050-10 is designed for RF system application frequencies from 500MHz to 2.5GHz. This Pallet Amplifier uses GaN on SiC HEMT technology which performs high breakdown voltage, high linearity, wide bandwidth and high efficiency. Electrical Specifications @ VDD=+28VDC, T=25°C, 50Ω System PARAMETER Symbol Min Typ Frequency Range BW 500 Output Power CW Psat 70 100 Watt Output Power @ P3dB G.C.P P3dB 50 63 Watt Small Signal Gain SSG 10.5 11.5 12.5 dB Small Signal Gain Flatness ΔG ± 1.5 ± 2.0 dB Input VSWR S11 2.0:1 2.5:1 - Harmonics @ P1dB G.C.P H -10 dBc Spurious Signals Spur -70 -60 dBc Operating Voltage VDC 28 30 Volt Supply Current @ Pout = 50W CW IDD 9.0 10.0 Amp Supply Current @ Pout = 25W CW IDD 6.0 7.0 Amp Max Unit 27 Max Unit 2500 MHz * Please DO NOT ENTER RF INPUT POWER OVER +43dBm. (to prevent the main from damaging) Environmental Characteristics PARAMETER Symbol Min Typ Operating Case Temperature Tc 0 +70 °C Storage Temperature Ts -40 +85 °C Mechanical Specifications PARAMETER Value Units Limits Dimensions ( L x W x H ) 107.0 x 50.0 x 5.8 mm Max RF Connectors In/Out SMA Female Cooling External Heat sink + airflow ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 0.1 Preliminary GaN-SiC Broadband Amplifier RUP15100-10 Interface Connectors Pin # 1 2,3 4 Description Specifications +Vdd +28 Drain to Source Voltage Vgs Gate to Source Voltage GND Ground Outline Drawing 6- 3 THRU RF_OUT +Vds -Vgs1 -Vgs2 GND RF_IN RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 0.1