AMDM Series FAST / TTL Buffered 5-Tap Delay Modules Low Profile 8-Pin Package Two Surface Mount Versions Electrical Specifications at 25OC FAST/TTL 5-tap 8-Pin DIP FAST/TTL Logic Buffered 5 Equal Delay Taps AMDM-7 AMDM-9 AMDM-11 AMDM-13 AMDM-15 AMDM-20 AMDM-25 AMDM-30 AMDM-35 AMDM-40 AMDM-50 AMDM-60 AMDM-75 AMDM-100 AMDM-125 AMDM-150 AMDM-200 AMDM-250 AMDM-350 AMDM-500 Operating Temperature Range 0OC to +70OC 14-Pin Versions: FAIDM Series SIP Versions: FSIDM Series Low Voltage CMOS Versions refer to LVMDM / LVIDM Series AMDM 8-Pin Schematic Vcc 8 1 IN Tap1 Tap3 Tap5 7 6 2 3 5 4 Tap2 Tap4 GND Tap Delay Tolerances +/- 5% or 2ns (+/- 1ns <13ns) Tap 1 Tap 2 Tap 3 Tap 4 Total - Tap 5 3.0 3.0 3.0 3.0 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 20.0 25.0 30.0 40.0 50.0 70.0 100.0 4.0 4.5 5.0 5.5 6.0 8.0 10.0 12.0 14.0 16.0 20.0 24.0 30.0 40.0 50.0 60.0 80.0 100.0 140.0 200.0 5.0 6.0 7.0 8.0 9.0 12.0 15.0 18.0 21.0 24.0 30.0 36.0 45.0 60.0 75.0 90.0 120.0 150.0 210.0 300.0 6.0 7.5 9.0 10.5 12.0 16.0 20.0 24.0 28.0 32.0 40.0 48.0 60.0 80.0 100.0 120.0 160.0 200.0 280.0 400.0 7 ± 1.0 9 ± 1.0 11 ± 1.0 13 ± 1.5 15 ± 1.5 20 ± 2.0 25 ± 2.0 30 ± 2.0 35 ± 2.0 40 ± 2.0 50 ± 2.5 60 ± 3.0 75 ± 3.75 100 ± 5.0 125 ± 6.25 150 ± 7.5 200 ± 10.0 250 ± 12.5 350 ± 17.5 500 ± 25.0 Tap-to-Tap (ns) ∗∗ 1 ± 0.5 ∗∗ 1.5 ± 0.5 ∗∗ 2 ± 0.7 ∗∗ 2.5 ± 1.0 3 ± 1.0 4 ± 1.5 5 ± 2.0 6 ± 2.0 7 ± 2.0 8 ± 2.0 10 ± 2.0 12 ± 2.0 15 ± 2.5 20 ± 3.0 25 ± 3.0 30 ± 3.0 40 ± 4.0 50 ± 5.0 70 ± 5.0 100 ± 10.0 ** These part numbers do not have 5 equal taps. Tap-to-Tap Delays reference Tap 1. TEST CONDITIONS -- FAST / TTL VCC Supply Voltage ................................................ 5.00VDC Input Pulse Voltage ................................................... 3.20V Input Pulse Rise Time ....................................... 3.0 ns max. Input Pulse Width / Period ........................... 1000 / 2000 ns 1. Measurements made at 25OC 2. Delay Times measured at 1.50V level of leading edge. 3. Rise Times measured from 0.75V to 2.40V. 4. 10pf probe and fixture load on output under test. DImensions in Inches (mm) .020 (0.51) .250 TYP. (6.35) MAX. DIP .120 (3.05) MIN. OPERATING SPECIFICATIONS VCC Supply Voltage ................................... 5.00 ± 0.25 VDC ICC Supply Current .................................... 48 mA Maximum Logic “1” Input: VIH ....................... 2.00 V min., 5.50 V max. IIH ............................... 20 µA max. @ 2.70V Logic “0” Input: VIL .......................................... 0.80 V max. IIL ............................................ -0.6 mA mA VOH Logic “1” Voltage Out .................................. 2.40 V min. VOL Logic “0” Voltage Out ............................... 0.50 V max. PWI Input Pulse Width ............................. 40% of Delay min. Operating Temperature Range ............................ 0O to 70OC Storage Temperature Range ...................... -65O to +150OC P/N Description AMDM - XXX X Buffered 5 Tap Delay Molded Package Series: 8-pin DIP: AMDM Total Delay in nanoseconds (ns) Lead Style: Blank = Thru-hole G = “Gull Wing” SMD J = “J” Bend SMD Rhombus Industries Inc. .020 .050 (0.51) (1.27) TYP. TYP. .020 .050 (0.51) (1.27) TYP. TYP. .100 (2.54) TYP. J-SMD .020 .050 (0.51) (1.27) TYP. TYP. .100 (2.54) TYP. For other values & Custom Designs, contact factory. .300 (7.62) .010 (0.25) TYP. .285 (7.24) MAX. .505 (12.83) MAX. G-SMD DIP .365 (9.27) MAX. .100 (2.54) TYP. .250 (6.35) MAX. .015 (0.38) TYP. G-SMD .030 (0.76) TYP. .430 (10.92) .400 (10.16) .008 R (0.20) .010 (0.25) TYP. .285 (7.24) MAX. .505 (12.83) MAX. Examples: AMDM-25G = 25ns (5ns per tap) 74F/TTL, 8-Pin G-SMD AMDM-100 = 100ns (20ns per tap) 74F/TTL, 8-Pin DIP Specifications subject to change without notice. .285 (7.24) MAX. .505 (12.83) MAX. .265 (6.73) MAX. .030 (0.76) TYP. J-SMD .285 (7.24) .260 (6.60) .330 (8.38) MAX. .020 R (0.51) AMDM 9901 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: [email protected]