SMPS Inductor Schematic Diagram Iron Powder Material (Hydrogen Reduced) Well Suited for Switch Mode Power Supplies and Regulator Applications. Toroid Mount Available Wire UL rated Class B (130o C) or better Electrical Specifications at 25OC Part Number L (1) (µH) Typ. IDC (2) 20% Amps IDC(3) 50% Amps I (4) max. Amps Energy min. (5) (µJ) DCR Max (mΩ) Lead Size AWG L-14436 758.9 2.77 6.60 8.11 2334 172 18 1) Typical Inductance with no DC. Tolerance of +10% 2) Current which will produce a 20% reduction in L. 3) Current which will produce a 50% reduction in L. 4) Maximum DC current. This value is for a 40oC temperature rise due to copper loss. with AC flux density kept to 10 gauss or less. (This typically represents a current ripple of less than 1%). 5) Energy storage capability of component in micro joules. value is for 20% reduction in permeability. Operating temperature Range -45oC to +85oC 0.660 (16.7) Physical Dimensions inches (mm) 2.150 (54.6) .375 (9.52) .750 (19.05) RHOMBUS P/N: L-14436 CUST P/N: DATE: 2/14/97 Rhombus Industries Inc. Transformers & Magnetic Products www.rhombus-ind.com NAME: SHEET: 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971