HDSL COMMON MODE CHOKE PARAMETER MIN MAX UNITS 7.5 12.5 mH Leakage Inductance 20 µH DCR 1.5 Ω Inductance Isolation 600 Current Units finished with UL rated varnish. VRMS 250 Amps Test Conditions: Inductance & Leakage Inductance tested at 20mVRMS and 20 kHz PHYSICAL DIMENSIONS All dimensions in inches (mm): .626 (15.90) MAX. PIN POSITION GRID 0.100 (2.54) .587 (14.90) MAX. HOLES FOR BOBBIN PINS .520 (13.21) MAX. .210 (5.33) TYP. .400 (10.16) TYP. .100 (2.54) TYP. Pin Diameter is 0.025 (0.64) SCHEMATIC DIAGRAM: PRI 1 6 2 7 3 8 4 9 5 10 SEC RHOMBUS INDUSTRIES INC. FSCM NO. 16714 RHOMBUS P/N: L-230V CUST P/N: DATE: 12/02/97 Rhombus Industries Inc. Transformers & Magnetic Products NAME: SHEET: 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971