Common Mode Inductor For DC/DC Power supply PARAMETER MIN. Inductance @ 0.20 Vrms / 1 kHz 2.89 DCR Max. of each Winding TYP. MAX. UNITS 4.34 mH 10 RMS rated Current for 40OC rise. mΩ 25 Leakage Inductance Creepage Between Windings A µH 50 Dielectric Strength Single Layer Windings with Spacers specially designed by Rhombus Industries to provide 3mm Creepage and Clearance for International Safety Compliance. 1250 Vrms 3.0 mm DO NOT EXCEED RATED RMS CURRENT. Operating Temperature: These parts are made with materials rated for 1300C minimum, and these components can be safely operated up to 130OC. * * AMBIENT + TEMPERATURE RISE. In addition, inductance will be effected by an increase in temperature. Typically: 20% increase to 500C 40% increase to 1000C 65% increase to 1300C Physical Dimensions - inches (mm) 2.600 (66.04) Typ. Schematic Diagram .740 (18.80) Typ. .500 (12.70) Typ. 1.800 (45.70) Typ. 1 2 .350 (8.90) Typ. Leads Stripped to within 0.062 (1.58) of the coil. 1.00 (25.40) Typ. 3 4 LEADS ARE # 13 AWG Lead Diameter .072(1.82) Rhombus Industries Inc. Transformers & Magnetic Products RHOMBUS P/N: L-667 CUST P/N: DATE: 01/08/01 NAME: SHEET: 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971 www.rhombus-ind.com Attenuation graph L-667 50 Attenuation ( dB ) 40 30 20 10 0 -10 -20 -30 -40 -50 1 kHz 10kHz 100kHz 1MHz 10MHz Frequency RHOMBUS P/N: L-667 CUST P/N: DATE: 01/08/01 Rhombus Industries Inc. Transformers & Magnetic Products NAME: SHEET: 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971 www.rhombus-ind.com