RHOPOINT 2200-2301

2200 Series/Microminiature Reed Relays
M ICROMINIATURE REED RELAYS
Ideally suited to the needs of Automated Test Equipment and
RF requirements. The specification tables allow you to select
the appropriate relay for your particular application. If your
requirements differ, please consult your local representative or
Coto’s Factory.
2200 SERIES FEATURES
u
u
u
u
u
u
u
u
Very small (0.17 in2), high reliability reed relays.
High Insulation Resistance - 1012 Ω available with some models.
High speed switching compared to electromechanical relays.
Hermetically sealed contacts for long life.
Epoxy coated steel shell provides magnetic shielding.
Optional Electrostatic Shield for reducing capacitive coupling.
Optional Coaxial Shield for 50 Ω impedance and switching of fast
rise time digital pulses offered on some models.
Relay models 2200-2301, 2200-2302, are ATE industry standards.
Specifically engineered for OEM designs and maintenance of
existing production fixtures.
Dimensions in Inches (Millimeters)
Bottom
View
2
Note:
Model #’s 2200-2301 & 2200-2302
represent complete part numbers.
COTO TECHNOLOGY
RHOPOINT COMPONENTS LTD,
Email: [email protected] Website: www.rhopoint.co.uk
2200 Series/Microminiature Reed Relays
Model Number s
Par ameter s
2204
Test Conditions
Units
2
1 For m A
2211
1 For m C
For Shield
Option
See 2911
2200-2301
1 For m A
Electr ostatic
Shield
2200-2302
1 For m A
Coaxial Shield
COIL SPECS.
Nom. Coil Voltage
VDC
5
12
5
12
5
5
Coil Resistance
+/- 10%, 25° C
Ω
370
1500
230
1500
150
150
Operate Voltage
Must Operate by
VDC - Max.
3.8
9.0
3.8
9.0
3.6
3.6
Release Voltage
Must Release by
VDC - Min.
0.4
1.0
0.4
1.0
0.5
0.5
Switching Voltage
Max DC/Peak AC Resist.
Volts
200
100
150
150
Switching Current
Max DC/Peak AC Resist.
Amps
0.5
0.25
0.5
0.5
Carry Current
Max DC/Peak AC Resist.
Amps
1.0
0.5
1.0
1.0
Max DC/Peak AC Resist.
Watts
10
3
10
10
500
100
500
500
x 10 Ops.
5
5
5
5
CONTACT RATINGS
Contact Rating
Life Expectancy-Typical
1
Signal Level 1.0V,10mA
6
x 10 Ops.
6
Rated Loads
Static Contact
Resistance (max. init.)
50mV, 10mA
Ω
0.100
0.150
0.150
0.150
Dynamic Contact
Resistance (max. init.)
0.5V, 50mA
at 100 Hz, 1.5 msec
Ω
0.200
0.200
0.200
0.200
RELAY
SPECIFICATIONS
Insulation Resistance
(minimum)
Capacitance - Typical
Across Open Contacts
Dielectric Strength
(minimum)
Ω
x 1012
x 1011
x 1011
x 1011
pF
pF
VDC/peak AC
VDC/peak AC
VDC/peak AC
0.9
0.2
250
250
1500
0.9
N/A
200
N/A
1500
0.9
0.2
250
250
1500
0.9
0.2
250
250
1500
Operate Time - including
bounce
Between all Isolated Pins
.at 100V, 25°C, 40% RH
Shield Floating
Shield Guarding
Between Contacts
Contacts to Shield
Contacts/Shield to Coil
At Nominal Coil Voltage,
30 Hz Square Wave
msec.
0.5 (typ.)
1.0 (typ.)
0.55 (max.)
0.55 (max.)
Release Time - Typical
Zener-Diode Suppression
msec.
0.1
2.0
0.1
0.1
Top View:
Dot stamped on top of relay refers to pin #1 location
Grid = .1"x.1" (2.54mm x 2.54mm)
Environmental Ratings
Notes:
1
Consult factory for life expectancy at
other switching loads.
2
Model 2204, pin #7 is tied to optional
electrostatic shield, pins #6 & #7 are
tied to optional coaxial shield.
COTO TECHNOLOGY
Storage Temp: -35°C to +100°C;
Operating Temp: -20°C to +85°C
Solder Temp: 270°C max; 10 sec. max
The operate and release voltage and the coil resistance
are specified at 25°C. These values vary by approximately
0.4%/°C as the ambient temperature varies.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
RHOPOINT COMPONENTS LTD Holland Rd, Hurst Green, Oxted, Surrey, RH8 9AX,ENGLAND