SRT Resistor Technology Standard Chip Resistors Type: CRS Sizes: 0504, 0603, 0805, 1206 Features: • • • • • • • Chip Resistors in Thickfilm Resistance element glass-passivated Contact areas Nickel-barrier / matte tin RF-versions untrimmed Resistance values up to 500 MΩ Working voltage up to 600 Volts Suitable for high vacuum applicatons – no organics Dimensions: Size L B +0.15/-0.05 1.0 D +0.15/-0.05 0.3 C +0.15/-0.05 0.2 +0.2/-0.1 0504 1.25 0603 1.5 +0.15/-0.05 0.8 +0.15/-0.05 0.4 +0.15/-0.05 0.2 +0.2/-0.1 0805 2.0 +0.15/-0.05 1.25 +0.15/-0.05 0.4 +0.15/-0.05 0.3 +0.2/-0.1 1206 3.2 +0.15/-0.05 1.5 +0.2/-0.05 0.4 +0.15/-0.05 0.3 +0.2/-0.1 B D L L = Length, B = Width, D = Thickness, C = Width of wrap around (in mm) Larger sizes on request C Packaging: Bulk in plastic bags – minimum quantity 100 pieces per value Blistertape acc. to IEC 60286-3 – minimum 1000 pieces per value Reel diameter 180 mm or 330 mm Ordering Data: Type – value – tolerance – TCR – packaging Example: CRS 0805 100K ± 1% - TCR 100 Tape 180 mm Untrimmed parts are indicated by the extension “NA” in the order code: Type – value – tolerance – NA – TCR - packaging Example: CRS 0805 100K ± 1% NA TCR 100 Tape 180 mm If no requirements for TCR and taping are given the standard value (highest value in table) will be supplied and packaging is bulk. Issue 10-2007 SRT Resistor Technology GmbH Ostlandstr. 31 D-90556 Cadolzburg Germany Fon: Fax: E-mail: Internet: +49 (0)9103 / 7952-0 +49 (0)9103 / 5128 [email protected] www.srt-restech.de SRT Resistor Technology Standard Chip Resistors Type: CRS Sizes: 0504, 0603, 0805, 1206 Technical data – depending on size: Size 0504 Power rating P70 (mW) 100 (P155 = 0 mW) Working voltage U_, Ueff (V) trimmed 50 untrimmed (Tol. > 5%) 150 0603 0805 1206 100 125 250 75 200 100 300 200 600 10/20% TC250 5/10/20% TC100/250 1/2/5/10% TC100 1/2/5/10% TC50/100 1/2/5/10% TC50/100 1/…/20% TC50/100 5/.../20% TC100/250 5/10/20% TC250 2/5/10/20% TC100/250 1/2/5/10% TC50/100 0.5/…/10% TC50/100 0.5/…/10% TC50/100 0.5/…/20% TC50/100 2/.../20% TC100/250 5/10/20% TC250 2/5/10/20% TC100/250 1/2/5/10% TC50/100 0.5/…/10% TC50/100 0.5/…/10% TC50/100 0.5/.../20% TC50/100 2/.../20% TC100/250 Ranges / Tolerances / TCR1) 0R1 – <1R 1R – <10R 10R – <100R 100R – 1M >1M – 10M >10M – 100M – 5/10/20% TC100/250 2/5/10% TC100 1/2/5/10% TC50/100 1/2/5/10% TC50/100 2/5/10/20% TC100/250 >100M – 500M – 1) TC 50: Temperature range + 25°C...+ 125°C Zero-Ohm-Jumper: < 50 mOhm. TCR max. + 4000 Sizes 0805/1206 in range 1M – 100 M as special product also with TCR 25 available. Technical data – general: Temperature range -55°C ... +155°C Climatic category acc. to DIN EN 60068-1 55/155/56 Solderability acc DIN EN 60068-2-58 (lead free and lead-containing) Max. soldering temperature acc. DIN EN 60068-2-58 250°C, 3s 260°C, 10s Long term stability 10R – 100M <10R / >100M <0.5% <1% <0.5% <0.25% <0.5% <1% <2% <1% <0.5% <1% Storage 125°C/1000h Storage 155°C/1000h Load P70/70°C/1000h Short term overload Damp heat (56d/40°C/96%) Data not specified according CECC 40401-802 Issue 10-2007 SRT Resistor Technology GmbH Ostlandstr. 31 D-90556 Cadolzburg Germany Fon: Fax: E-mail: Internet: +49 (0)9103 / 7952-0 +49 (0)9103 / 5128 [email protected] www.srt-restech.de