R2E-F Latching Low Profile SMD Reed Sensor Low profile SMD package, Form E, Latching Molded with internal blades parallel to SMD feet All dimensions in mm Does not require power for operation Bi-stable, form E contact remembers state Polarity sensitive Molded with internal blades parallel to SMD feet Packed in tape and reels conforming to IEC-60286-3 norms Lead (Pb) free and RoHS compliant Applications This reed sensor is suitable for use in the following applications and many others: floor detection for elevators, lifts and hoists, level sensors... Specification Contact Form Contact Rating (max) Switching Current (max) Carry Current (max) Switching Voltage (max) Breakdown Voltage (min) Initial Contact Resistance (max) Operating Temperature Shock Resistance (½Sin wave for 11ms) Vibration Resistance (10-2000Hz) Ordering Code R2E-F-(Operate AT Code) OAT Code 1 W / VA A A VDC VDC mī °C g g E 10 0.5 1.0 100 150 150 -20 to +100 30 20 10 â 15 Please contact us for re-closure values Example R2E-F-1 denotes 10-15 operate and release AT. Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 25 December 2006 Reed Relays and Electronics India Limited īˇ [email protected] īˇ Tel 91-44-6528-4022