MO-1422 Miniature Reed Switch Form A, Off-Center Contact, 15W All dimensions in mm This off centre contact form A reed switch is designed for magnet applications. Measurements are always taken with the contact overlap portion centred to the length of the test coil, with the width of all blades in a batch of switches, facing one way, for better in-group measurement accuracy. This reed switch is Lead (Pb) free and RoHS compliant. Formations Available Cropped SMD Welded Soldered Goal post L Formed Applications This reed switch is suitable for use in the following applications and many others: automobile seatbelt sensors, rowing electronics, ferrous metal detection sensors, gear speed and direction sensors... Electrical Sub code Operate Range Release Range Contact Rating (max) Switching Current (max) Carry Current (max) Switching Voltage (max) Switching Voltage (max) Breakdown Voltage Initial Contact Resistance (max) Insulation Resistance (min) Capacitance (min) Miscellaneous Operate Time (max) Bounce Time (max) Release Time (max) Resonance Frequency Operating Frequency Operating Temperature Test Coil Lead out plating Shock Resistance Vibration (10-2000Hz) AT AT W/ VA A A VDC VAC VDC m pF ms ms ms Hz Hz °C g g 1.5 0.8 0.15 >2000 500 -40 to +200 717 102 002 Sn (Pb free) 50 20 15 – 50 5 – 35 15.0 0.5 1.0 150 125 200 150 10 11 0.2 Ordering Code MO-1422-(Start Operate AT)-(Finish Operate AT) Example MO-1422-15-18 Denotes 15-18 Operate AT band. Other Configurations Available Dynamic contact resistance limit, Higher insulation resistance, Special release limits, Gold plates leads Please refer to our reed switch usage notes Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 10 May 2008 Reed Relays and Electronics India Limited [email protected] Tel 91-44-6528-4022