R5-S Ultra-Miniature SMD Reed Sensor Gull wings, Normally Open, 5W Molded with internal blades parallel to SMD feet All dimensions in mm Does not require power for operation Normally open (NO) form A contact Omni-polar device; actuates with either pole of magnet Molded with internal blades parallel to SMD feet Packed in tape and reels conforming to IEC-60286-3 norms Lead (Pb) free and RoHS compliant Applications This reed sensor is suitable for use in the following applications and many others: cellular phones and PDAs, dentists drills, pacemakers and defibrillators, nerve stimulators, spirometers, high resolution level sensors... Specification Contact Form Contact Rating (max) Switching Current (max) Carry Current (max) Switching Voltage (max) Breakdown Voltage (min) Initial Contact Resistance (max) Operating Temperature Shock Resistance (½Sin wave for 11ms) Vibration Resistance (10-2000Hz) Ordering Code R5-S-(Operate AT Code)-(Packing Code) OAT Code *Before *After 1 7 – 12 15 – 35 2 12 - 17 25 - 45 *Indicate Operate AT band before and after modification of leads W / VA A A VDC VDC m °C g g A 5.0 0.35 0.5 100 150 200 -40 to +140 30 20 Packing Code L G Plastic Box (500) Tape (2500) Example R5-S-1-G denotes 7-12 Operate AT packed in taped reels. Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 1 February 2008 Reed Relays and Electronics India Limited [email protected] Tel 91-44-6528-4022 R5-S Ultra-Miniature SMD Reed Sensor Actuation Distances Operate and release distances for the R5-S ultra-miniature reed sensor in two standard AT bands, when actuated (as shown in the sketches) with NdFeB standard magnets is shown below. All distances given are in mm with tolerances of ±0.5mm. Although some of the AT band / magnet combinations will produce similar actuating distances, selecting the right AT band and magnet for an application is important and can be done by going through our AT band FAQ and our magnet selection guide. R5S-1 (7-12 AT) Actuation Sketch R5S-2 (12-17 AT) Actuation Sketch Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Dimensions 4.0 x 1.5 x 1.5 Ø2.0 x 4.0 6.0 x 2.5 x 2.5 Ø3.0 x 7.0 8.0 x 3.0 x 3.0 Ø4.0 x 10.0 19.0 x 4.0 x 4.0 Ø8.0 x 15.0 Operate Distance 2.0 – 4.5 2.5 – 5.0 5.0 – 8.5 6.0 – 10.0 7.0 – 11.0 9.5 – 13.0 11.5 – 19.0 19.0 – 27.0 Release Distance 2.0 – 5.0 2.5 – 5.5 5.0 – 9.0 6.0 – 10.5 7.0 – 11.5 9.5 – 13.5 11.5 – 19.5 19.0 – 27.5 Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Dimensions 4.0 x 1.5 x 1.5 Ø2.0 x 4.0 6.0 x 2.5 x 2.5 Ø3.0 x 7.0 8.0 x 3.0 x 3.0 Ø4.0 x 10.0 19.0 x 4.0 x 4.0 Ø8.0 x 15.0 Operate Distance 2.0 – 3.0 2.5 – 3.5 5.0 – 6.5 5.5 – 7.5 7.0 – 9.0 9.0 – 11.0 11.0 – 15.0 17.5 – 22.0 Release Distance 2.0 – 3.5 2.5 – 4.0 5.0 – 7.0 5.5 – 8.0 7.0 – 9.5 9.0 – 11.5 11.0 – 15.5 17.5 – 22.5 Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 31 July 2008 Reed Relays and Electronics India Limited [email protected] Tel 91-44-6528-4022