CX2VSM CRYSTAL 16 kHz to 600 kHz Miniature Surface Mount Quartz Crystal for Pierce Oscillators ™ DESCRIPTION actual size The CX2VSM quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates. These miniature crystals are intended to be used in Pierce oscillators. They are hermetically sealed in a rugged, miniature ceramic package. They are manufactured using the STATEKdeveloped photolithographic process, and were designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications. Maximum process temperature should not exceed 260O C. side view Glass Lid Shown PACKAGE DIMENSIONS B 1 2 FEATURES A I Miniature tuning fork design H G High shock resistance 3 F Designed for low power applications D Compatible with hybrid or PC board packaging Low aging E C Full military testing available Ideal for battery operated applications TYP. Designed and manufactured in the USA EQUIVALENT CIRCUIT C0 1 L1 C1 R1 2 R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance 0.105 (2.67) 0.113 (2.87) 0.060 (1.52) inches (mm) GRID COURTYARD 1 inches mm inches mm A 0.260 6.60 0.275 6.99 B 0.094 2.39 0.108 2.74 C - - D 0.035 0.89 0.045 1.14 E 0.059 1.50 0.069 1.75 F 0.050 1.27 0.060 1.52 see below G 0.105 2.67 0.115 2.92 H 0.155 3.94 0.165 4.19 I 0.210 5.33 0.220 5.59 DIM “C” SUGGESTED LAND PATTERN MAX. DIM GLASS LID CERAMIC LID MAX inches mm inches mm SM1 0.065 1.65 0.075 1.91 SM2 0.067 1.70 0.077 1.96 SM3 0.070 1.78 0.080 2.03 Note: Terminal 1 is electrically connected internally to terminal 3 2 0.060 (1.52) IS O RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de YS 90 01 ERT T E M C IFIC T A N IO S 10134 - Rev B FIGURE 1 CX2V TYPICAL MOTIONAL RESISTANCE (R1) * Tighter frequency calibration available. ** Other turning point available. *** Higher shock and vibration available. CX2V Standard Calibration Tolerance at 250C 300 200 100 R1(k) 50 2 2 16 + _ 50 ppm (0.005%) + _ + _ + _ + _ + _ + _ 100 ppm (0.01%) + _ 100 ppm (0.01%) 100 ppm (0.01%) + _ 1000 ppm (0.1%) 1000 ppm (0.1%) 200 ppm (0.02%) 200 ppm (0.02%) + _ 16 + _ 2000 ppm (0.2%) 5000 ppm (0.5%) Frequency Load Range Capacitance (kHz) (pF) Frequency Range (kHz) Load Capacitance (pF) 16-24.9 25-54.9 55-100.0 100.1-179.9 180-600 5 4 HOW TO ORDER CX2VSM CRYSTALS CX2V S “S” if special or custom design. Blank if Srd. C SM1 32.768K , Frequency K = kHz SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped Blank = Glass Lid C = Ceramic Lid 30 Calibration Tolerance @ 25OC (in ppm) / M Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 50 100 200 600 Frequency (kHz) FIGURE 3 CX2V TYPICAL QUALITY FACTOR (Q) 300 200 100 50 16 50 100 200 600 Frequency (kHz) FIGURE 4 CX2V TYPICAL TURNING POINT TEMP. (T0) 500 ppm (0.05%) Load Capacitance (CL), Used to Calibrate CX2V (other CL available) 10 9 8 2 1.0 250-600 30 ppm (0.003%) 600 0.5 O + _ 200 5 20 170-249.9 100 FIGURE 2 CX2V TYPICAL MOTIONAL CAPACITANCE (C1) TO ( C) 75-169.9 50 Frequency (kHz) Frequency Range (kHz) 16-74.9 10 0 5 C1(fF) Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Frequency Range 16 kHz to 600 kHz Functional Mode Tuning Fork (Flexure) Standard Calibration Tolerance* (see table below) Motional Resistance, (R1) See Figure 1 MAX: 16-24.9 kHz, 2x Typ. 25-600 kHz, 2.5x Typ. Motional Capacitance, (C1) Figure 2 Quality Factor, (Q) Figure 3 MIN is 0.25x Typ. Shunt Capacitance, (C0) 2.0 pF MAX. Drive Level 16-24.9 kHz 0.5 µW MAX 25-600 kHz 1.0 µW MAX Turning Point, (T0)** Figure 4 Temperature Coefficient, (k) -0.035 ppm/OC2 Aging, first year 5 ppm MAX Shock, survival*** 1,500 g peak, 0.3 ms, 1/2 sine Vibration, survival*** 10 g RMS, 20-2,000 Hz random Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC Max Process Temperature 260OC for 20 sec. (in 1000's) SPECIFICATIONS +80 +70 +60 +50 +40 +30 +20 +10 0 -10 -20 16 20 50 100 200 600 Frequency (kHz) Note: Frequency f at temperature T is related to frequency f0 at turning point temperature T0 by: f-f 2 0 = k(T-T0) f0 TERMINATIONS Designation SM1 SM2 SM3 Termination Gold Plated Solder Plated Solder Dipped PACKAGING OPTIONS CX2VSM - Tray Pack -16mm tape, 7” or 13” reels (Reference tape and reel data sheet 10109) IS O RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de YS 90 01 ERT T E M C IFIC T A N IO S 10134 - Rev B