• Low Cost • 24 or 48V Outputs • Wide Range AC Input • Active PFC • Parallel Function Switch • -25 to +71°C Operation Key Market Segments & Applications Key Market Segments & Applications Industrial Controls: Motor Control Systems Factory Automation: Process Control, Automotive, Chemical Processing Test & Measurement: Burn in & Test, Instrumentation Measurement DPP480 Series 480W Single Output DIN Rail Mount Power Supplies DPP480 Features and Benefits Features Benefits • PFC Compliant to EN61000-3-2 • UL508 Approvals • TS35/7.5 or TS35/15 DIN Rail Mounting • Supports Global Use • Easier System Configuration • Easy System Integration Specifications MODELS ITEMS AC Input Voltage range VAC Input Frequency Hz DC Input Voltage range VDC Inrush Current (115 / 230VAC) A Power Factor Input Current (115/230VAC) A Output Voltage V Output Current A Output Voltage Adjustment Range Output Voltage Accuracy % Line Regulation % Load Regulation % Ripple and Noise (20MHz BW) mV Overcurrent Protection (Typ) Overvoltage Protection V Hold Up Time (115VAC input) ms Efficiency (typ) % Parallel operation LED Indicators DC Good Relay (24V model only) Operating Temperature -Storage Temperature Operating Humidity Cooling (1) Withstand Voltage Isolation Resistance Safety Agency Approvals Conducted & Radiated EMI Weight (Typ) g Size (WxHxD) mm Case material Warranty yrs DPP480-24-1 DPP480-48-1 90 - 264VAC 47 - 63Hz 120 - 370VDC 25 / 50A Meets EN61000-3-2 Class A, typ 0.99 at 230VAC input 7 / 3.5A 24V 48V 20A 10A 22.5 - 28.5V 47 - 56V -0, +1% of Nominal ±0.5% ±0.5% (±5% when set in parallel mode) 100mV 120 - 140% 30 - 33V 57 - 63V > 30ms 89% 90% Set in single or parallel (droop) mode - maximum of 3 units Green LED = On, Red LED = DC Output Low 0.3A rated normally open relay contacts, closes when output is above 17.6 - 19.4V 25 to +71°C (Derate linearly 2.5%/°C from 56 to 71°C)(2) -25 to +85°C 20 - 95% RH (non condensing) Convection Input to Output 3kVAC for 1 min. >100M at 25C & 70%RH, Output to Ground 500VDC UL508 Listed, UL60950-1, EN60950-1, CE EN55022 class B 1920g 175 x 125 x 123 Metal 2 years Notes: (1) Recommend 1" clearance on all sides (2) Derating curve applies for input of 110V and above. For 90V input derating at 4% per deg DPP480 Series 1 Model Selector Output Voltage (V) Output Adjust (V) Output Curr. (A) Max. Output Power (W) Efficiency at Full Load (%) DPP480-24-1 24 22.5 - 28.5 20 480 89 DPP480-48-1 48 47.0 - 56.0 10 480 90 Model For plug type connectors add suffix ‘B’ to part number PIN Assignments Pin# Function 1 2 3 4 5 6 7 8 9 DC Good Relay DC Good Relay V+ V+ VVGND N L LOCAL DISTRIBUTION RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ ■ ■ Änderungen vorbehalten / subject to change without notice 4 2 DPP480 Series ■ Outline Drawing DPP480 Series DPP480-24-1 7.0 [0.3] DPP480 Series 3