RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ ■ ■ ■ Änderungen vorbehalten / subject to change without notice RD-35 35W Dual Output Switching Power Supply series Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL OUTPUT INPUT RD-35A RD-35B RD-3513 OUTPUT NUMBER CH1 CH2 CH1 CH2 CH1 CH2 DC VOLTAGE 5V 12V 5V 24V 13.5V -13.5V RATED CURRENT 4A 1A 2.2A 1A 1.3A 1.3A CURRENT RANGE 0.3 ~ 4A 0.2 ~ 1A 0.3 ~ 4A 0.2 ~ 1.3A 0.3 ~ 2A 0.2 ~ 1.5A RATED POWER 32W 35W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 80mVp-p VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% CH1: 4.75 ~ 5.5V 2.0% 6.0% 35.1W 120mVp-p 5.0% 120mVp-p 120mVp-p CH1: 11.5 ~ 15.5V 4.0% 4.0% LINE REGULATION Note.4 0.5% 1.5% 0.5% 1.0% 0.5% 0.5% LOAD REGULATION Note.5 0.5% 3.0% 0.5% 2.0% 3.0% 3.0% SETUP, RISE TIME 500ms, 30ms/230VAC HOLD TIME (Typ.) 80ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 79% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.8A/115VAC 0.55A/230VAC COLD START 36A/230VAC LEAKAGE CURRENT 1200ms, 30ms/115VAC at full load 16ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 82% 80% <2mA / 240VAC 110 ~ 150% rated output power OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V CH1: 16.87 ~ 19.57V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on CH1 output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950, TUV EN60950 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 6) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A 179Khrs min. MIL-HDBK-217F (25 99*82*36mm (L*W*H) 0.3Kg; 45pcs/14Kg/0.83CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:RD-35-SPEC 2006-04-12 RD-35 35W Dual Output Switching Power Supply Mechanical Specification Case No. 932A series Unit:mm 1 8.25 2 3.5 82 3 2- M3 4 40 5 20.5 40.5 7 6 55 5 3.5 5 88.5 99 6.5 87 3.5 28 2-M 36 3.5 3 18 17.5 74 Terminal Pin. No Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. 4 5 6 Assignment DC OUTPUT V2 DC OUTPUT COM DC OUTPUT V1 Output Derating Static Characteristics (A) Ta=25 100 OUTPUT VOLTAGE (V) 60 LOAD (%) 300 +12V 80 40 20 -25 -25 5.2 0 0 10 20 30 40 AMBIENT TEMPERATURE ( 50 60 70 12 5.0 250 +5V 11 4.8 200 10 4.6 150 9 4.4 100 8 4.2 50 7 4.0 25 (HORIZONTAL) 60 80 100 120 140 160 180 200 220 240 OUTPUT RIPPLE (mVp-p) 13 264 INPUT VOLTAGE (V) 60Hz ) File Name:RD-35-SPEC 2006-04-12 RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ Änderungen vorbehalten / subject to change without notice ■ ■ ■