CDF ALUMINUM ELECTROLYTIC CAPACITORS FOR STROBE FLASH CDF SERIES Electrolytic capacitors for rapid strobe flash applications. FEATURES • Long life under rapid charge and discharge use. compliance. • RoHS CAUTION CDF series is designed, manufactured and intended solely for use in signal light with strobe-flash. This is not intended for use in medical equipment. Rubycon Corporation, Rubycon America, Inc., and Shin-Ei Capacitor Foil Company, Ltd. expressly disclaim any warranties or representations as to the suitability or fitness of this capacitor for use in medical equipment. SPECIFICATIONS Items Characteristics Category Temperature Range -25 ∼ +70°C Rated Voltage Range 360V.DC 450V.DC Withstand Voltage 390V.DC 500V.DC -10 ∼ + 20% (25°C, 120Hz) Capacitance Tolerance I=3 CV (After 5 minutes application of rated voltage) Leakage Current(MAX) I= Leakage Current ( µ A) Dissipation Factor(MAX) (tanδ) V= Rated Voltage (V) C= Rated Capacitance ( µ F) (25°C, 120Hz) 0.07 Charge and discharge at rated voltage at 45°C in every 1 second for 1 million times via Xe flash tube. Charge and Discharge Capacitance Change + 10% of the initial value. Within - Dissipation Factor Not more than 150% of the specified value. Leakage Current Not more than 200% of the specified value. +5°C after voltage processing in JIS C 5102 item 4.4. Storage without voltage applied at 70°C for 500 hours and measured at 25°C Shelf Life Capacitance Change + 10% of the initial value. Within - Dissipation Factor Not more than 150% of the specified value. Leakage Current Not more than 300% of the specified value. STANDARD SIZE WV φD Cap ( µ F) 40 50 60 80 100 120 150 200 300 400 360 φ 22 φ 25 22 × 30 22 × 40 22 × 50 25 25 25 25 450 φ 30 × 30 × 39 × 45 × 51 30 × 41 30 × 45 30 × 65 + Case Size φ D +1MAX ×L - 2 (mm) φ 35 35 × 51 35 × 66 φ 22 22 × 35 22 × 40 22 × 50 φ 25 25 25 25 25 × 35 × 39 × 45 × 55 φ 30 30 30 30 30 × 45 × 51 × 51 × 65 φ 35 35 × 45 35 × 56 35 × 66