OGD-SMD Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, 5 x 20 / 6.3 x 32 mm, SMD, IEC: 500 VAC, UL/CSA: 600 VAC/DC, Cover, IEC 60355-1 500 VAC · 4 W / 10 A (VDE) · 600 VAC/DC · 16 A (UL/CSA) Description -Fuseholder for 500 VAC applications -Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order number: 0031.8242 / 0031.8242.F1 -Fuse block accepts 5x20 or 6.3x32 fuse-links Standards -IEC 60127-6 -UL 4248-1 / UL 512 -CSA C22.2 no. 39 Applications -Equipment with three-phase supply (400 VAC) -Industrial electronic References General Product Information Packaging Details Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals -VDE License Number: 40008993 (250V) + 40018378 (500V) -UL File Number: E39328 Technical Data Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC Soldering Methods Solderability 5 x 20 or 6.3 x 32 mm PCB Screw or Rivet Solder SMT 500 VAC (VDE), 600 VAC/DC (UL/CSA) 10 A (VDE), 16 A (UL/CSA) 4 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 00 / IP 20 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 3.7 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Voltage, Power Acc./Current Rating, Approvals Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Fuses Reflow (see variants) 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 240 - 260 °C / 20 - 40 sec acc. to IPC/ JEDEC J-STD-020D < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 2 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc OGD-SMD Fuseholder Blocks & Clips www.schurter.com/pg02b Abmessungen 35.4 mm ø 2.7 1.1 12 0.7 12.7 13.4 ø 4.8 4.6 20 ±0.20 9.7 35.4 10.9 16 4 Solder pads Derating Curves for Fuseholders Admissible Power Acceptance in Watt 4.0 3.5 3.0 I = 1.0 In 2.5 I = 0.7 In 2.0 I = << In 1.5 1.0 0.5 0.0 0 20 40 60 80 100 Ambient Air Temperature Ta °C Variants Holder Material Reflow Condition Remark Order Number l Thermoplastic (acc. to JEDEC J-STD-020C), Tp=240 +0/-5 °C, tp = 20-40 s - 0031.8241 l Spec. Thermoplastic 2 acc. to JEDEC J-STD-020C, Tp=260 +0/-5 °C, tp = 20-40 s Approvals pending 0031.8242 Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Packaging Unit xxxx.xxxx.F1 Bar Packaging (20x50 pcs.) Accessories Description Cover OGD, OGD-SMD Cover for Holder OGD, OGD-SMD Reflow-Cover 0853.0917 The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.