FPG2 Fuseholders www.schurter.com/pg02 Shock-Safe Fuseholder, 5 x 20 mm, Slot/Fingergrip, Rear-Side, IP 40 / IP 67, IEC 60335-1 Fingergrip 250 VAC · 2.5 W / 10 A (VDE)16 A (UL/CSA) Description -Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order numbers: xxxx.xxxx.15 -Mounting from rear-side Standards -IEC 60127-6 -UL 4248-1 / UL 512 -CSA C22.2 no. 39 Applications -Industrial electronic -Household appliances -Medical equipments References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals -VDE License Number: 127216 -UL File Number: E39328 Technical Data Shocksafe Category Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC Soldering Methods Solderability PC2 5 x 20 mm Panel Mount, Rear-Side Fixing Nut Solder or Quick-Connect 4.8 x 0.5 mm 250 VAC 10 A (VDE), 16 A (UL/CSA) 2.5 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 40 / IP 67 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 6.01 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Voltage, Power Acc./Current Rating, Approvals Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Admissible Torque on Fixing Nut Panel Thickness s Fuses Iron 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 < 5 mΩ at 20 mV > 3 kV between L-N > 4 kV between L/N-PE (50 Hz; 1 min) > 2.5 kV between L-N > 6 kV between L/N-PE > 10 MΩ between L-N > 100 MΩ between L/N-PE (500 VDC; 1 min) I - II acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc max 1.2 Nm max 8 mm FPG2 Fuseholders www.schurter.com/pg02 Abmessungen 46.5 mm ø 15 1.8 ø 12.5 1.8 ø 16.1 7.62 ø 11.1 ø 15 ø 16.1 18.5 M12.7x1.5 M12.7x1.5 20 13.5 8 46.5 Variants Fingergrip 3101.0025 and 3101.0225 ø 15 0 0 11.7 -0.15 0 13 -0.3 Mounting holes Derating Curves for Fuseholders Admissible power acceptance in Watt 1.8 41.5 12.7 -0.1 0 12.7 -0.1 0 2.5 2.0 I = 1.0 In I = 0.7 In I = << In 0.5 0.0 40 60 80 100 Ambient air temperature Ta °C 8 Variants Fingergrip 3101.0125 and 3101.0325 12 -0.1 20 20.6 46.5 Variants 3101.0120 and 3101.0320 0 ø 12.5 1.8 ø 16.1 7.62 ø 11.1 ø 15 ø 16.1 12.9 8 41.5 1.0 6 17.9 M12.7x1.5 M12.7x1.5 20.6 2.5 SW14 6 SW14 1.5 8 Fuses 7.62 4 2.5 ø 11.1 Variants 3101.0020 and 3101.0220 12.9 8 20 41.5 41.5 8 6 SW14 6 SW14 13.5 2.5 7.62 8 ø 11.1 4 2.5 8 FPG2 Fuseholders www.schurter.com/pg02 Variants Holder Cap Terminal Degree of Protection Material Remark Order Number l Slot Knob Solder IP 40 Thermoplastic - 3101.0020 l Slot Knob Solder IP 40 Spec. Thermoplastic 1 Approvals pending 3101.0020.15 l Slot Knob Quick-Connect 4.8 x 0.5 mm IP 40 Thermoplastic - 3101.0220 l Slot Knob Quick-Connect 4.8 x 0.5 mm IP 40 Spec. Thermoplastic 1 Approvals pending 3101.0220.15 l Fingergrip Solder IP 40 Thermoplastic - 3101.0025 l Fingergrip Solder IP 40 Spec. Thermoplastic 1 Approvals pending 3101.0025.15 l Fingergrip Quick-Connect 4.8 x 0.5 mm IP 40 Thermoplastic - 3101.0225 l Fingergrip Quick-Connect 4.8 x 0.5 mm IP 40 Spec. Thermoplastic 1 Approvals pending 3101.0225.15 l Slot Knob Solder IP 67 Thermoplastic - 3101.0120 l Slot Knob Solder IP 67 Spec. Thermoplastic 1 Approvals pending 3101.0120.15 l Slot Knob Quick-Connect 4.8 x 0.5 mm IP 67 Thermoplastic - 3101.0320 l Slot Knob Quick-Connect 4.8 x 0.5 mm IP 67 Spec. Thermoplastic 1 Approvals pending 3101.0320.15 l Fingergrip Solder IP 67 Thermoplastic - 3101.0125 l Fingergrip Solder IP 67 Spec. Thermoplastic 1 Approvals pending 3101.0125.15 l Fingergrip Quick-Connect 4.8 x 0.5 mm IP 67 Thermoplastic - 3101.0325 l Fingergrip Quick-Connect 4.8 x 0.5 mm IP 67 Spec. Thermoplastic 1 Approvals pending 3101.0325.15 Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. White and grey colours available on request Packaging Unit Bulk 186 x 91 x 110 mm (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.