FPG3 Fuseholders www.schurter.com/pg02 Shock-Safe Fuseholder, 5 x 20 mm, Slot/Fingergrip, Snap stepless, 1.0 - 3.0 mm, IEC 60335-1 Fingergrip 250 VAC · 2.5 W / 10 A (VDE)16 A (UL/CSA) Description -Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order numbers: xxxx.xxxx.15 -Panel Thickness 1.0 - 3.0 mm, Snap stepless -Fuseholder available in black, grey and white Standards -IEC 60127-6 -UL 4248-1 / UL 512 -CSA C22.2 no. 39 Applications -Industrial electronic -Household appliances -Medical equipments References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals -VDE License Number: 127216 -UL File Number: E39328 Technical Data Shocksafe Category Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC Soldering Methods Solderability PC2 5 x 20 mm Panel Mount, Front-Side Snap-in Solder or Quick-Connect 4.8 x 0.5 mm 250 VAC 10 A (VDE), 16 A (UL/CSA) 2.5 W / 10 A @ Ta 23 °C 2.5 W / 10 A for xxxx.xxxx.15 versions in horizontal position Degree of Protection IP 40 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 5.3 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Voltage, Power Acc./Current Rating, Panel Thickness, Approvals Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Panel Thickness s Fuses Iron 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 < 5 mΩ at 20 mV > 3 kV between L-N > 4 kV between L/N-PE (50 Hz; 1 min) > 2.5 kV between L-N > 6 kV between L/N-PE > 10 MΩ between L-N > 100 MΩ between L/N-PE (500 VDC; 1 min) I - II acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc 1.0 - 3.0 mm FPG3 Fuseholders www.schurter.com/pg02 Abmessungen 40 mm 5.5 8 26.5 7.62 ø 11.1 ø 12.5 ø 15 1.8 ø 15 7.62 ø 11.1 4 6 10.5 26.5 40 8 45 S ø 12.7 ø 12.7 S Variants Fingergrip 3101.0035, 3101.0235, 3101.0036 and 3101.0336s = Panel thickness (see variants) 0 0 11.7 -0.15 12.35 -0.15 Variants 3101.0030, 3101.0230, 3101.0031 and 3101.0331s = Panel thickness (see variants) 0 0 13 -0.1 13 -0.1 Mounting holes Derating Curves for Fuseholders Admissible power acceptance in Watt 2.5 2.0 I = 1.0 In 1.5 I = 0.7 In I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Variants Holder Cap Panel Thickness s [mm] Terminal Colour Holder Material Order Number l Slot Knob 1.0 - 1.8mm Solder black Thermoplastic 3101.0030 l Slot Knob 1.0 - 1.8mm Solder black Spec. Thermoplastic 1 3101.0030.15 l Slot Knob 1.0 - 1.8mm Quick-Connect 4.8 x 0.5 mm black Thermoplastic 3101.0230 l Slot Knob 1.0 - 1.8mm Quick-Connect 4.8 x 0.5 mm black Spec. Thermoplastic 1 3101.0230.15 l Slot Knob 2.0 - 3.0mm Solder black Thermoplastic 3101.0031 l Slot Knob 2.0 - 3.0mm Solder black Spec. Thermoplastic 1 3101.0031.15 l Slot Knob 2.0 - 3.0mm Quick-Connect 4.8 x 0.5 mm black Thermoplastic 3101.0331 l Slot Knob 2.0 - 3.0mm Quick-Connect 4.8 x 0.5 mm black Spec. Thermoplastic 1 3101.0331.15 l Fingergrip 1.0 - 1.8mm Solder black Thermoplastic 3101.0035 l Fingergrip 1.0 - 1.8mm Solder black Spec. Thermoplastic 1 3101.0035.15 l Fingergrip 1.0 - 1.8mm Quick-Connect 4.8 x 0.5 mm black Thermoplastic 3101.0235 l Fingergrip 1.0 - 1.8mm Quick-Connect 4.8 x 0.5 mm black Spec. Thermoplastic 1 3101.0235.15 l Fingergrip 2.0 - 3.0mm Solder black Thermoplastic 3101.0036 l Fingergrip 2.0 - 3.0mm Solder black Spec. Thermoplastic 1 3101.0036.15 Fuses FPG3 Fuseholders www.schurter.com/pg02 Holder Cap Panel Thickness s [mm] Terminal Colour Holder Material Order Number l Fingergrip 2.0 - 3.0mm Quick-Connect 4.8 x 0.5 mm black Thermoplastic 3101.0336 l Fingergrip 2.0 - 3.0mm Quick-Connect 4.8 x 0.5 mm black Spec. Thermoplastic 1 3101.0336.15 Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. White and grey colours available on request Packaging Unit Bulk 186 x 91 x 91 mm (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.