4752 Distribution Units www.schurter.com/pg07_1 Strip Block for Snap-in Mounting with 4 IEC Appliance Outlets F F 70° C Description Characteristics -Panel Mount: Snap-in version from front side -2 Functions: Module of 4 outlets, Pin temperature 70 °C, Protection class I -Solder terminals or quick connect terminals -Busbar is of single piece (no soldering) -Insulation cover on the rear-side -Qualified for use in equipment according IEC/EN 60950 Other versions on request -For protection class II Approvals References -CSA License Number: 56242 General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 30 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Solder terminals or quick connect terminals Snap-in1/1.2/1.5/2/2.5/3 mm tolerance +0.0/-0.1 Thermoplastic, black, UL 94V-0 Appliance Outlet Connectors F acc. to IEC/EN 60320-2-2, UL 498 CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 4752 Distribution Units www.schurter.com/pg07_1 Dimensions Quadbloc 4752 Panel cut-out 96,2 x 32,5 mm, corner radius max. 1 mm Variants Panel Thickness s [mm] Terminal Length [mm] 1 Quick connect terminals 6.3 x 0.8 mm 100 4752.3200 1.2 Quick connect terminals 6.3 x 0.8 mm 100 4752.8200 1.5 Quick connect terminals 6.3 x 0.8 mm 100 4752.4200 2 Quick connect terminals 6.3 x 0.8 mm 100 4752.5200 2.5 Quick connect terminals 6.3 x 0.8 mm 100 4752.6200 3 Quick connect terminals 6.3 x 0.8 mm 100 4752.7200 1 Solder terminals 4 x 0.8 mm 100 4752.3400 1.2 Solder terminals 4 x 0.8 mm 100 4752.8400 1.5 Solder terminals 4 x 0.8 mm 100 4752.4400 2 Solder terminals 4 x 0.8 mm 100 4752.5400 2.5 Solder terminals 4 x 0.8 mm 100 4752.6400 3 Solder terminals 4 x 0.8 mm 100 4752.7400 1 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.3000 1.2 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.8000 1.5 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.4000 2 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.5000 2.5 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.6000 3 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.7000 Please note, all quadblocs are available in protection-class II upon request. Cord retaining clamp see accessories Packaging unit Order Number 50 Pcs Connectors 4752 Distribution Units www.schurter.com/pg07_1 Accessories Description Cord retaining kits Cord retaining strain relief Flat head, E Flat head, G 4700.0005 4700.0007 Mating Inlets/Plugs Category / Description Interconnection Cord Overview complete Interconnection Cord with IEC Plug E, Angled 0607 Interconnection Cord with IEC Plug E, Angled 0608 Interconnection Cord with IEC Plug E, Straight 0609 Interconnection Cord with IEC Plug G, Angled 607B Interconnection Cord with IEC Plug G, Angled 608B Interconnection Cord further types to 4752 ... Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm 4732 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm 4733 IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm 4735 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm 4736 IEC Plug E, Cord Connector (Rewireable), Straight 9009 Plug further types to 4752 ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.