4758 Distribution Units www.schurter.com/pg07_1 Strip Block for Snap-in Mounting with 4 IEC Appliance Outlets F and Space for 2 Extra Components Snap-In Version F 70° C Description Characteristics -Panel Mount: Snap-in version from front side -4 Functions: Module of 4 outlets, with additional carrier frame for accessory modules, Pin temperature 70 °C, Protection class I -Solder terminals or quick connect terminals -Busbar is of single piece (no soldering) -Insulation cover on the rear-side -Qualified for use in equipment according IEC/EN 60950 Other versions on request -For protection class II References Approvals General Product Information -VDE License Number: 40010521 -UL License Number: E96454 -CSA License Number: 56242 Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, SCHURTER-Stock-Check, Distributor-Stock-Check Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 30 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Solder terminals or quick connect terminals Snap-in 1/ 1.2/ 1.5/ 2/ 2.5/ 3 mm tolerance +0.0/-0.1 Thermoplastic, black, UL 94V-0 Appliance Outlet Connectors F acc. to IEC/EN 60320-2-2, UL 498 CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 4758 Distribution Units www.schurter.com/pg07_1 Dimensions Quadbloc + Two 4758 Cut-out for 2 mm Snap-in Inlet Panel cut-out 134 x 32,5 mm, corner radius max. 5 mm With power entry module, type 6200 or type 6220 Variants Distributor-Stock-Check | SCHURTER-Stock-Check | e-Store Panel Thickness s [mm] Terminal Length [mm] 1 Quick connect terminals 6.3 x 0.8 mm 138 4758.3200 1.2 Quick connect terminals 6.3 x 0.8 mm 138 4758.8200 1.5 Quick connect terminals 6.3 x 0.8 mm 138 4758.4200 2 Quick connect terminals 6.3 x 0.8 mm 138 4758.5200 2.5 Quick connect terminals 6.3 x 0.8 mm 138 4758.6200 3 Quick connect terminals 6.3 x 0.8 mm 138 4758.7200 1 Solder terminals 4 x 0.8 mm 138 4758.3400 1.2 Solder terminals 4 x 0.8 mm 138 4758.8400 1.5 Solder terminals 4 x 0.8 mm 138 4758.4400 2 Solder terminals 4 x 0.8 mm 138 4758.5400 2.5 Solder terminals 4 x 0.8 mm 138 4758.6400 3 Solder terminals 4 x 0.8 mm 138 4758.7400 1 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 138 4758.3000 1.2 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 138 4758.8000 1.5 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 138 4758.4000 2 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 138 4758.5000 2.5 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 138 4758.6000 3 Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 138 4758.7000 Please note, all quadblocs are available in protection-class II upon request. Cord retaining clamp see accessories Packaging unit Order Number 50 Pcs Connectors 4758 Distribution Units www.schurter.com/pg07_1 Required Accessory Description 6200 IEC Appliance Inlet C14 with Fuseholder 1-pole IP 40, 5 x 20, 1-pole 6200.4120 IP 40, 5 x 20, 1-pole 6200.4220 IP 40, 5 x 20, 1-pole 6200.4320 6220 IEC Appliance Inlet C14 with Fuseholder 2-pole IP 40, 5 x 20, 2-pole 6220.5120 IP 40, 5 x 20, 2-pole 6220.5220 IP 40, 5 x 20, 2-pole 6220.5320 Accessories Cord retaining kits Cord retaining strain relief Flat head, Z 0888.0021 Flat head, E 4700.0005 Flat head, G 4700.0007 Flat head, H 4700.0008 Mating Inlets/Plugs Category / Description Interconnection Cord Overview complete Interconnection Cord with IEC Plug E, Angled 0607 Interconnection Cord with IEC Plug E, Angled 0608 Interconnection Cord with IEC Plug E, Straight 0609 Interconnection Cord with IEC Plug G, Angled 607B Interconnection Cord with IEC Plug G, Angled 608B Interconnection Cord further types to 4758 ... Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm 4732 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm 4733 IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm 4735 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm 4736 IEC Plug E, Cord Connector (Rewireable), Straight 9009 Plug further types to 4758 ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.