ILR Pulse Transformers www.schurter.com/pg85 Cost optimized pulse transformers for THT mounting, short rise time Description -High insulation rating (>2.2 kVAC) between the primary and the secondary windings -Small coupling capacitances between primary and secondary windings limit transient feedback from the power supply side to the control electronics -Cost optimized design -The defined partial discharge voltage guarantees an effecively unlimited serviceable live Standards Applications -Galvanic separation of drive- and power-circuit -Mainly used in ignition circuits with Thyristors, Triacs, power transistors and IGBT's -DC/DC converters -Line coupling transformers in high speed data transmission References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check -VDE 110b Technical Data Rated voltage Voltage Time Integral Pulse Rise Time Turns Ratio Terminal technic Weight Material: Housing Sealing Compound up to 500 VAC 150 - 300 Vµs 0.1 - 0.3 µs 1:1, 2:1, 3:1, 1:1:1 THT 7 g Plastics UL 94V-0 Climatic Category Allowable Operation Temp. Dimensions Case 05-7 25/100/21 acc. to IEC 60068-1 -25 °C to 100 °C Case 05-8 max. 17.5 5 7.5 max. 11.5 1) 1) Prim. (0.4) Ø0.5 min. 5 1) max. 11.5 15 Ø0.5 max. 18.5 (0.4) max. 18.5 15 max. 17.5 12.5 min. 5 1) Prim. Variants Turns Ratio Tr [μs] Iign [A] UVAC [V] Uisol [kV] Us x Tw [Vμs] Ls [mH] RP [Ω] RS [Ω] CC [pF] Pm [W] Weight [g] Packing unit [pcs.] Housing 1:1 0.2 1.0 500 3.2 300 2.5 0.7 0.7 60 0.5 7 50 05-7 The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments. Order Number ILR-11-0001