KEA Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole KEA Plug removal necessary for fuse replacement KEA C14 70° C Description -Panel Mount: Screw-on version from front or rear side, snap-in version from front side -3 Functions: Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole, with or without voltage selector (step switch) -Quick connect terminals 4.8 x 0.8 mm -Alternative: version with line filter KFA Characteristics -Available with or without internal connections -Plug removal necessary for fuse-link replacement The fuse drawer "Fingergrip" can be removed by hand For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuseholder is accessible from the equipment front -Qualified for use in equipment according IEC/EN 60950 Other versions on request -With solder terminals -Fuse drawer with other voltage values -For protection class II Approvals -VDE License Number: 40012272 -UL License Number: E93617 -CSA License Number: 38456 References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Voltage Selectors Connectors C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves optional, step, 2-4 digits KEA Power entry modules without line filter www.schurter.com/pg05 Dimensions Screw-on mounting type KEA 44 mm Snap-in mounting type KEA 2 2.2 4.8x0.8 41.4 27.5 S ±0.1 41.4 18 ø 3.2 27.5 4.8x0.8 0 36 R2.5-0.2 27.5 +0.2 0 +0.2 0 31.5 M3/ø3.6 R2.5 230 +0.2 0 31.5 34 31.2 R6 27.2 R4 230 R2.5 34 27.2 R4 36 ±0.1 31.2 18 4 2.2 2 ø 6.3x90˚ 0 30 R2.5-0.2 27.5 +0.2 0 44 Diagrams without internal connections Voltage selector 4-positions, 1-pole without internal connections Voltage selector 4-positions, 2-pole with internal connections Voltage selector 3-positions, 1-pole with internal connections Voltage selector 3-positions, 2-pole Voltage selector 2-positions 1-pole Voltage selector 2-positions 2-pole without voltage selector 1-pole without voltage selector 2-pole 2-pole 2.0 1.5 I = 1.0 In I = 0.7 In 1.0 I = << In 0.5 0.0 0 20 40 60 80 100 Admissible power acceptance in Watt per pole Admissible power acceptance in Watt Derating Curves 1-pole Ambient air temperature Ta °C 1.6 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = < < In 0.4 0.2 0.0 0 20 Ambient air temperature Ta °C Connectors 40 60 80 100 KEA Power entry modules without line filter www.schurter.com/pg05 Variants Fingergrip and Extra-Safe Fuse drawer must be ordered separately Type Panel mounting Panel Thickness s [mm] Fuseholder Voltage Selectors Internally wired KEA Screw - KEA Screw - KEA Screw KEA 1-pole 3 pos. l 1-pole 3/4 digits - 1-pole without l 4301.0521 Screw - 2-pole 3 pos. l 4301.0001 KEA Screw - 2-pole 3/4 digits KEA Screw - 2-pole without l 4301.0501 KEA Snap-in 1.5 1-pole 3 pos. l 4301.0022 KEA Snap-in 2 1-pole 3 pos. l 4301.0023 KEA Snap-in 2.5 1-pole 3 pos. l 4301.0024 KEA Snap-in 1.5 1-pole 3/4 digits 4301.2062 KEA Snap-in 2 1-pole 3/4 digits 4301.2063 KEA Snap-in 2.5 1-pole 3/4 digits KEA Snap-in 1.5 1-pole without l 4301.0522 KEA Snap-in 2 1-pole without l 4301.0523 KEA Snap-in 2.5 1-pole without l 4301.0524 KEA Snap-in 1.5 2-pole 3 pos. l 4301.0002 KEA Snap-in 2 2-pole 3 pos. l 4301.0003 KEA Snap-in 2.5 2-pole 3 pos. l 4301.0004 KEA Snap-in 1.5 2-pole 3/4 digits 4301.2042 KEA Snap-in 2 2-pole 3/4 digits 4301.2043 KEA Snap-in 2.5 2-pole 3/4 digits 4301.2044 KEA Snap-in 1.5 2-pole without l 4301.0502 KEA Snap-in 2 2-pole without l 4301.0503 KEA Snap-in 2.5 2-pole without l 4301.0504 Packaging unit Order Number 4301.0021 4301.2061 4301.2041 4301.2064 50 Pcs Required Accessory Description Fusedrawer 2 Fusedrawer with and without Voltage Selector Insert Fingergrip, 2-pole, Voltage Selectors, 110, 150, 220 4301.1014.01 Fingergrip, 2-pole, Voltage Selectors, 120, 240 4301.1014.02 Fingergrip, 2-pole, Voltage Selectors, 110, 220 4301.1014.03 Fingergrip, 2-pole, Voltage Selectors, 115, 220 4301.1014.04 ... Connectors KEA Power entry modules without line filter www.schurter.com/pg05 Accessories Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to KEA Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to KEA ... Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to KEA ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.