KP (FH) Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole Inlet with fuseholder (5x20 mm) Medical fuse drawer KPF Filter Module (not enclosed) C14 70° C Description -Panel Mount: Sandwich/rear-side -2 Functions: Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole -For PCB mounting -Alternative: version with line filter KPF; KPS Approvals -VDE License Number: 40008635 -UL License Number: E93617 -CSA License Number: 38456 Characteristics -Panel mount from rear or "sandwich" between top and bottom/side to side panels PCB mount with snap-in or screw-on <BREAK/> feet (self tapping screws Ø 3 x 8 mm) -All single elements are already wired -Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuse drawer can only be opened with the aid of a tool The fuseholder is accessible from the equipment front -Insulation cover on the rear-side -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Solder terminals -Quick-connect terminals -For protection class II References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 For PCB mounting Quick connect terminals 4.8 x 0.8 mm Solder terminal on request Snap-in: 1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Connectors C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves KP (FH) Power entry modules without line filter www.schurter.com/pg05 Dimensions Screw on PCB mounting 56.1 mm Snap-in mounting 56.1 27.8 2 2 31.2 52.1 27.8 2 32 36.5 2 R2 18.5 1.3 1.1 6.2 50.1 S ±0.1 S ±0.1 16 50.1 16 53.34 A = for PCB-thickness 1.2/1.6/2.0/2.4 mm Additional quick connect terminal 4.8 x 0.8 mm Additional quick connect terminal 4.8 x 0.8 mm s = panel thickness For 2-pole inlet/switch, 2-pole inlet fuseholder and inlet/outlet for combinations: inlet/switch 1-pole Inlet/ fuseholder 1-pole 53.34 13.97 10.16 S +0.1 0 D2 7.55 D2 ±0.1 D1 25.4 1.6 +0.1 0 D1 1.6 (16.45) 3.82 27.94 5.08 7.62 X ±0.1 S and X see mounting holes 32.3 ±0.1 Sandwich mounting holes 32.3 ±0.1 Sandwich mounting holes 18.5 32.3 ±0.1 Mounting holes for backside mounting X ±0.1 X ±0.1 52.4 ±0.1 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 Dimensions Stable snap feet requires minimal insertion force 0.8 0 ø 5.9 -0.1 1.1 53.34 25.4 4.5 1.3 20.2 2.9 0.8 ø 5.9 1.1 4.5 2 A 1.3 1.1 4.5 2.5 2 18.5 36 36.5 2 R2 32 36 56.1 31.2 52.1 1.6 ±0.1 2 Module must lay flat on the PCB when soldering Screw-on mount uses self-tapping screws Connectors 10.16 10.16 1.3 20.2 6.2 KP (FH) Power entry modules without line filter www.schurter.com/pg05 Insertion from behind "Sandwich" mounting with split enclosure panels Other dimensions as for 2-poles d1 = 6 ± 0.05 for (snap-in) d1 = 3.6 (screw-on) d2 = 2 ± 0.1 (screw-on) Dimensions without tolerance: ≤ 15 = ± 0.05; ≥ 15 = ± 0.1 Diagrams Inlet with fuseholder (5 x 20 mm) Variants Panel mounting Panel Thickness s [mm] PCB [mm] Line Switch Fuseholder Connector Order Number Screw 2 1.2/1.6/2.0/2.4 - 1-pole - KP01.1452.01 Screw 2 1.2/1.6/2.0/2.4 - 2-pole - KP01.1352.01 Screw 3 1.2/1.6/2.0/2.4 - 1-pole - KP01.1453.01 Screw 3 1.2/1.6/2.0/2.4 - 2-pole - KP01.1353.01 Snap-in 2 1.6 - 1-pole - KP01.1412.01 Snap-in 2 1.6 - 2-pole - KP01.1312.01 Snap-in 3 1.6 - 1-pole - KP01.1413.01 Snap-in 3 1.6 - 2-pole - KP01.1313.01 Type KP without cover: KP01.XXXX.XX90 Ground Terminal with solder pin: KP01.XXXX.X3XX Packaging unit 50 Pcs Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to KP (FH) Connectors KP (FH) Power entry modules without line filter www.schurter.com/pg05 Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to KP (FH) ... Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to KP (FH) ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.