SCHURTER 43013211

KEA-Print
Power entry modules without line filter
www.schurter.com/pg05
IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole for PCB
KEA-Print
Plug removal necessary for fuse
replacement
KEA-Print
C14
70° C
Description
Characteristics
Approvals
Other versions on request
-Panel Mount:
Screw-on version from front or rear side, snap-in version from front
side
-2 Functions:
Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm
1‑ or 2‑pole
-For PCB mounting
-All single elements are already wired
-Plug removal necessary for fuse-link replacement
The fuse drawer "Fingergrip" can be removed by hand
For added safety "Extra-Safe" fuse drawers are available
Fuse drawer meets requirements of medical standard IEC/EN 60601-1
The fuseholder is accessible from the equipment front
-Qualified for use in equipment according IEC/EN 60950
-With solder terminals
-Fuse drawer with other voltage values
-For protection class II
-VDE License Number: 40012272
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
Distributor-Stock-Check, Accessories
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
10 A / 250 VAC; 50 Hz
10 A / 250 VAC; 60 Hz
> 3 kVAC between L-N
> 4 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class 1 acc. to IEC 61140
For PCB 1,6 mm
Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1.5/2/2.5 mm
Thermoplastic, black, UL 94V-0
Appliance Inlet
Fuseholder
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
Connectors
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class 1
1 or 2 pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per
pole
Admissible power acceptance at higher ambient temperature see derating
curves
KEA-Print
Power entry modules without line filter
www.schurter.com/pg05
Dimensions
Screw-on mounting type KEA-PRINT
44 mm
2.2
2
ø 6.3x90˚
1-pole
3
41.4
ø 3.2
12.7
18.9
4
N
R4
27.2
5.1
36 ±0.1
R2.5
31.5
34
31.2
R6
+0.2
0
20.3
2-pole
3
5
M3/ø3.6
0
36
27.5
R2.5-0.2
+0.2
0
44
Template grid 1/10" = 2.54 mm
Drill. Ø: 3/5/N = Ø 1.3 + 0,1/0
Gnd = Ø 1.6 + 0,1/0
2.2
2
Snap-in mounting type KEA-PRINT
1-pole
S ±0.1
41.4
3
12.7
18.9
N
R2.5
36
31.5
31.2
27.2
34
R4
5.1
+0.2
0
20.3
2-pole
0
R2.5-0.2
Template grid 1/10" = 2.54 mm
Drill. Ø: 3/5/N = Ø 1.3 + 0,1/0
Gnd = Ø 1.6 + 0,1/0
3
5
Connectors
27.5
+0.2
0
KEA-Print
Power entry modules without line filter
www.schurter.com/pg05
Diagrams
with internal connections
1-pole
with internal connections
2-pole
(KEA-Print)
(KEA-Print)
Derating Curves
1-pole
2-pole
1.5
I = 1.0 In
I = 0.7 In
1.0
I = << In
0.5
0.0
0
20
40
60
80
1.6
Admissible power acceptance in Watt
per pole
Admissible power acceptance in Watt
2.0
100
Ambient air temperature Ta °C
1.4
1.2
I = 1.0 In
1.0
0.8
I = 0.7 In
0.6
I = < < In
0.4
0.2
0.0
0
20
40
60
80
100
Ambient air temperature Ta °C
Variants
Fingergrip and Extra-Safe
internal connections, fuse drawer must be ordered separately
Type
Panel mounting
Panel Thickness
s [mm]
Fuseholder
Voltage Selectors
Internally wired
KEA-Print
Screw
-
1-pole
without
l
4301.3211
KEA-Print
Screw
-
2-pole
without
l
4301.3201
KEA-Print
Snap-in
1.5
1-pole
without
l
4301.3212
KEA-Print
Snap-in
2
1-pole
without
l
4301.3213
KEA-Print
Snap-in
2.5
1-pole
without
l
4301.3214
KEA-Print
Snap-in
1.5
2-pole
without
l
4301.3202
KEA-Print
Snap-in
2
2-pole
without
l
4301.3203
KEA-Print
Snap-in
2.5
2-pole
without
l
4301.3204
Packaging unit Order Number
50 Pcs Required Accessory
Description
Fusedrawer 2
Fusedrawer with and without Voltage Selector Insert
Fingergrip, 2-pole
4301.1401
Extra-Safe, 2-pole
4301.1403
Fingergrip, 1-pole
4301.1405
Extra-Safe, 1-pole
4301.1407
...
Connectors
KEA-Print
Power entry modules without line filter
www.schurter.com/pg05
Accessories
Cord retaining kits
Cord retaining strain relief
Flat head, A
4700.0001
Countersunk, B
4700.0002
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal
4787
IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal
4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal
5091
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal
5092
Appliance Outlet further types to KEA-Print
Connector Overview complete
IEC Connector C15, Rewireable, Straight
0101
IEC Connector C15A, Rewireable, Straight
0102
IEC Connector C15A, Rewireable, Straight
0102-G
IEC Connector C15A, Rewireable, Angled
0112
IEC Connector C13, Rewireable, Angled
4012
Connector further types to KEA-Print
...
Power Cord Overview complete
Power Cord with IEC Connector C13, Angled
0311
Power Cord with IEC Connector C13, Angled
3011
Power Cord with IEC Connector C13, Angled
3012
Power Cord with IEC Connector C13, Angled
3013
Power Cord with IEC Connector C13
3020
Power Cord further types to KEA-Print
...
The
specifications, descriptions and illustrations indicated in this document are based on
Connectors
current information. All content is subject to modifications and amendments.