SEAWARD SE432L

Description
Features
The SE432L is a low voltage three terminal
¾
Low voltage operation (1.24V)
adjustable shunt regulator with a guaranteed
¾
Adjustable output voltage V0 =VREF to 8V
thermal
temperature
¾
Wide operating current range 60μA to 100mA
ranges. The output voltage can be set to any value
¾
Low dynamic output impedance 0.30Ω (Typ.)
between VREF (approximately 1.24 V) to 8V with two
¾
Trimmed bandgap design up to + 0.5%.
external resistors. This device has a typical output
¾
ESD rating is 2.5KV(Per MIL-STD-883D)
impedance
¾ 100% Lead (Pb)-Free.
stability
of
over
0.30Ω.
applicable
Active
output
circuitry
provides a very sharp turn on characteristic, making
this device excellent replacement for Zener diodes
in many applications.
The SE432 is characterized for operation from
-40oC to 105oC, and two package options (SOT-23
and TO-92) allow the designer the opportunity to
select the proper package for their applications.
Application
¾
Linear Regulators
¾
Adjustable Supplies
¾
Switching Power Supplies
¾
Battery Operated Computers
¾
Instrumentation
¾
Computer Disk Drives
Pin Configuration
SOT-23-3, SC59-3L
TO-92
(Top View)
(Top View)
Marking Information
Package
SOT-23-3
SC59-3L
TO-92
Revision
Marking
S432Lx
Production Batch Number
The last character is the batch number.
Lead-Free Package
Lead-free package is
indicated by a dot on
top of the last character.
SE432L
XXXX
XXXX is the batch number.
Lead-free
indicated
package
by
XXXX.
12/4/2008
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2004. • www.seawardinc.com.cn • Page 1
LF
is
after
Absolute Maximum Rating
Parameter
Symbol
Maximum
Units
Cathode Voltage
VKA
8
V
Continuous Cathode Current
I KA
150
mA
Reference Current
I REF
3
mA
Operating Junction Temperature Range
TJ
150
°C
Storage Temperature Range
TSTG
-45 to 150
°C
Thermal Resistance
θ JA
Lead Temperature (Soldering) 10 seconds
230 (SOT-23-3)
°C/W
220 (TO-92)
TLEAD
260
°C
Electrical Characteristics
Parameter
Symbol
Test Conditions & Circuit
Min
Typ
Max
1234
1240
1246
1228
1240
1252
1221
1240
1259
2.0%
1215
1240
1265
1.25V 1%(1)
1237
1250
1263
--
68
--
1.0
2.7
mV/V
--
0.15
2
μA
--
0.10
--
60
100
μA
--
0.04
0.8
μA
--
0.30
1
Ω
0.5%
1.0%
Reference
1.5%
Voltage
Deviation of Reference Voltage over
Full Temperature Range
Ratio of Change in Reference Voltage
to the Change in Cathode Voltage
Reference Current
Deviation of Reference Current over
Full Temperature Range
Minimum Cathode Current for
Regulation
Off-state Cathode Current
VREF
Test circuit #1
VKA = VREF, IKA = 10mA
Unit
mV
Test circuit #1
VI(DEV)
VKA = VREF, IKA = 10mA,
mV
TA =-40°C - 105°C
︱ΔVREF/ΔVKA︱
IREF
Test circuit #2
IKA = 10mA, ΔVKA = 8V to VREF
Test circuit #2
IKA = 10mA, R1=10kΩ, R2 = ∞
Test circuit #2
II(DEV)
IKA = 10mA, R1=10kΩ, R2 = ∞
μA
TA = 0°C - 105°C
IMIN
IOFF
Test circuit #1
VKA = VREF
Test circuit #3
VKA = 8V, VREF = 0
Test circuit #1
Dynamic Impedance
| ZKA |
IKA = 100μA - 80mA,
VKA = VREF, f ≤ 1kHZ
Note 1: Upon Customer Request.
Revision
12/4/2008
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2004. • www.seawardinc.com.cn • Page 2
Typical Performance Characteristics
Cathode Current VS Cathode Voltage
Cathode Current (mA)
150
100
50
0
-50
-100
-150
-1.5
-1
-0.5
0
0.5
1
1.5
Cathode Voltage (V)
Revision
12/4/2008
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2004. • www.seawardinc.com.cn • Page 3
Stability Boundary Condition
100
IKA (mA)
80
60
40
20
1
0.1
0.01
0.001
0
CL (uF)
VKA=VREF (1.24V)
VKA=2V
VKA=3V
The areas under the curves represent conditions that may cause the device to oscillate. For VKA = 2V and 3V
curves, R2 and VBAT were adjusted to establish the initial VKA and IK conditions with CL = 0. VBAT and CL then
were adjusted to determine the ranges of stability. As the graph suggested, SE432L is unconditional stable
with IK from 0 to 100mA and with CL from 0.001uF to 1uF.
Revision
12/4/2008
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2004. • www.seawardinc.com.cn • Page 4
Block Diagram
Symbol Diagram
Cathode
Cathode
Ref
+
Ref
Vref
Anode
Anode
Test Circuits
Input
V KA
Input
VKA
I KA
Input
VKA
I off
I KA
R1
Iref
R2
Vref
Vref
R1
VKA = Vref (1+ ) + Iref x R1
R2
Test Circuit 1:
Test Circuit 2:
Test Circuit 3:
VKA = VREF
VKA > VREF
Off State Current
Application Circuit
VIN
R
VOUT
R1
SE432
Vref
VOUT = Vref (1+R1 )
R2
GND
Revision
12/4/2008
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2004. • www.seawardinc.com.cn • Page 5
R2
OUTLINE DRAWING SOT-23-3
C
J
DIMENSIONS
INCHES
MM
MIN
MAX
MIN
MAX
H
B
N
DIM
D
A
E
G
F
K
L
A
B
C
D
E
F
G
H
J
K
L
0.110
0.047
0.083
0.035
0.070
0.018
0.015
0.0005
0.034
0.003
-
0.120
0.055
0.104
0.040
0.080
0.024
0.020
0.004
0.040
0.007
0.027
2.80
1.20
2.10
0.89
1.78
0.45
0.37
0.013
0.887
0.085
-
3.04
1.40
2.64
1.03
2.05
0.60
0.51
0.10
1.02
0.18
0.69
OUTLINE DRAWING SC59-3L
DIM
H
A
E
A1
B
e1
D
L
SC 59-3L
Q
L1
C
A
A1
B
C
D
H
E
e
e1
L1
L
Q
N
DIMENSIONS
INCHE
MM
MIN
MAX
MIN
MAX
0.035 0.043 0.90
1.10
0.0004 0.005
0.01
0.13
0.012 0.020 0.30
0.50
0.004 0.008 0.09
0.20
0.110 0.122 2.80
3.10
0.098 0.122 2.50
3.10
0.059 0.067 1.50
1.70
0.037REF
0.075REF
0.008
0.014
0℃
0.95REF
1.90REF
0.022
0.031
10℃
0.20
0.35
0℃
0.55
0.80
10℃
OUTLINE DRAWING TO-92
A
B
D
N
DIM
E
G
F
H
K
Revision
J
A
B
E
F
G
H
J
K
DIMENSIONS
INCHES
MM
MIN MAX MIN MAX
0.175
0.170
0.500
0.016
0.045
0.095
0.080
0.125
0.205
0.210
0.610
0.021
0.055
0.105
0.105
0.165
12/4/2008
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2004. • www.seawardinc.com.cn • Page 6
4.445
4.318
12.70
0.407
1.143
2.413
2.032
3.175
5.207
5.334
15.50
0.533
1.397
2.667
2.667
4.191
Customer Support
Seaward Electronics Incorporated – China
Section B, 2nd Floor, ShangDi Scientific Office Complex, #22 XinXi Road
Haidian District, Beijing 100085, China
Tel: 86-10-8289-5700/01/05
Fax: 86-10-8289-5706
Seaward Electronics Corporation – Taiwan
2F, #181, Sec. 3, Minquan East Rd,
Taipei, Taiwan R.O.C
Tel: 886-2-2712-0307
Fax: 886-2-2712-0191
Seaward Electronics Incorporated – North America
1512 Centre Pointe Dr.
Milpitas, CA95035, USA
Tel: 1-408-821-6600
Last Updated - 12/4/2008
Revision
12/4/2008
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2004. • www.seawardinc.com.cn • Page 7