GBP4005G~GBP410G VOLTAGE 50 ~ 1000 V, 4.0AMP Glass Passivated Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free GBP FEATURES Surge overload rating – 125 amperes peak Ideal for printed circuit board Plastic material has underwriters laboratory flammability classification 94V-0 Mounting position: Any H A C B G L KD J F E Millimeter Min. Max. 14.25 14.75 10.20 10.60 3.40 3.60 14.50 15.50 0.30 0.60 3.56 4.06 REF. A B C D E F REF. G H J K L Millimeter Min. Max. 1.17 1.42 2.80 x 45° 0.70 0.86 2.30 2.70 0.70 1.10 MAXIMUM RATINGS (TA=25°C unless otherwise specified. Single phase, Hal f wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%) PART NUMBERS PARAMETER SYMBOL GBP UNIT GBP GBP GBP GBP GBP GBP 4005G 401G 402G 404G 406G 408G 410G Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current at TA=50°C 1 Output V I(AV) 4.0 A Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 110 A Maximum Forward Voltage Drop Per Bridge Element at 4.0A Peak VF 1.1 V Maximum Reverse Current at Rated DC Blocking Voltage IR 5 µA TJ=25°C TJ=100°C I2t Rating for Fusing (t<8.3ms) Typical Junction Capacitance per Element 2 Typical Thermal Resistance 3 I2t µA 50 A2S CJ 40 pF RθJC 7.5 °C/W -55~150, -55~150 °C Operating & Storage Temperature Range TJ,TSTG Note: 1. Mounting condition, 0.5” lead length maximum 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 3. Unit mounted on 75mm x 75mm x 1.6mm copper plate heatsink. 24-Feb-2010 Rev. D 500 Page 1 of 2 GBP4005G~GBP410G Elektronische Bauelemente VOLTAGE 50 ~ 1000 V, 4.0AMP Glass Passivated Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES 24-Feb-2010 Rev. D Page 2 of 2