SCT316LD Series 300W Transient Voltage Supperssors Array Elektronische Bauelemente RoHS Compliant Product Description 16LD Package The SCT316LD series of monolithic Transient Voltage suppressors are designed for application where voltage transients, caused by electrostatic discharge (ESD) and other induced voltage surges, can permanently damage sensitive conponents. These TVS diodes are characterized by low capacitance while at the same time retaining their high surge capability, extremely fast response time and low dynamic resistance, The SCT324LD series consists of 8 monolithic bi-directional TVS diode arrays and is specifically designed to protect multiple or single data line with each channel being electrically independent for mutiple I/O port protection. Application CONFIGURATION * ESD & surge protection for power lines & I/O ports * TTL and MOS Bus Lines * RS-422, RS-432 and RS485 data lines * High speed logic * High speed data & video transmission * Rosh compliant in Lead-Free Versions 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 Features * 300 watts Peak pulse power (tp=8 x 20us). * Protects up to 8 bi-directional line. * Standoff voltages from 3.3 to 36 volts. * ESD protection >30KV Maximum rating and electrical characteristics Rating Symbol Value Units Peak ulse Power (tp=8/20us) Ppk 300 Watts Lead Soldering Temperature TL 260 (10 sec.) ℃ Operating Temperature TJ -55 to +125 ℃ Storage Temperature TSTG -55 to +150 ℃ Electrical Characteristics Per Line @ 25º C Unless otherwise specified PART NUMBER STAND OFF VOLTAGE VWM VOLTS CLAMPING VOLTAGE CLAMPING VOLTAGE LEAKAGE CURRENT CAPACITANCE VBR @1 mA VOLTS Vc, @ 1 Amp VOLTS Vc, @ 5 Amp VOLTS ID,@ V WM µA @0V, 1 MHz pF MIN MAX MAX MAX MAX BREAKDOWN VOLTAGE SCT316LD03C 3.3 4-5 7 8.5 100 700 SCT316LD05C 5.0 6.1-7.4 9.8 11 12 420 SCT316LD12C 12.0 13.3-16.9 19 24 0.5 150 SCT316LD16C 15.0 16.7-20.4 24 30 0.5 130 SCT316LD24C 24.0 26.7-32.6 43 55 0.5 60 SCT316LD36C 36.0 40.0-47.0 60 75 0.5 60 NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage V WM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. http://www.SeCoSGmbH.com Any changing of specification will not be informed individual SCT316LD Series 300W Transient Voltage Supperssors Array Elektronische Bauelemente Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve 10 % of Rated Power or I PP Peak Puse Power - P PP (kW) 110 1 0.1 100 90 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 100 0 1000 25 50 75 100 125 150 Ambient Temperature - TA ( o C) P ulse Duration - tp (u s) Pulse Waveform 110 Wave form Paramete rs: tr = 8 s td = 20 s 100 90 Percent of I PP 80 70 e 60 -t 50 40 td = I PP /2 30 20 10 0 0 5 10 15 20 25 30 Time ( u s) http://www.SeCoSGmbH.com Any changing of specification will not be informed individual SCT316LD Series 300W Transient Voltage Supperssors Array Elektronische Bauelemente Out Drawing 5.82~6.20 0.86~1.26 9.80~10.20 1.37~1.73 0.10~0.25 0.33~0.51 1.27BSC O O 0 ~8 3.80~4.00 0.4~1.25 0.19~0.25 Suggested Pad Layout 1.27 TYP _ 4.0+0.13 _ 0.76+0.13 6.22 Min _ 1.14+0.13 All dimensions in Millimeters http://www.SeCoSGmbH.com Any changing of specification will not be informed individual