KS05V5 VOLTAGE: 5.0 V Elektronische Bauelemente 40 W Transient Voltage Suppressors Diode RoHS Compliant Product TSOP-6 DESCRIPTION . Designed to protect voltage sensitive components from ESD. . Excellent clamping capability, low leakage and fast response. . Cellular phones, MP3 players, digital cameras ... etc. . Suitable for electronics where board space is a major design consideration. o .075(1.90) Ref .037TYP (0.95TYP) 10 o 0 .023Re f (0.60)Re f .071(1.80) .055(1.40) .118(3.00) .102(2.60) . (0.45)Ref .018 Ref FEATURES .020(0.50) .012(0.30) . Response time is typically < 1 ns . Low leakage . Stand-off voltage:5.0V . Ulta Low Capacitance : 22pF . IEC61000-4-2 level 4 ESD protection .006(0.15) .003(0.08) .122(3.10) .106(2.70) .004(0.10) .000(0.00) .043(1.10) .035(0.90) .039(1.00) .018(0.70) Dimensions in inches and (millimeters) 6 5 4 1 2 3 MAXIMUM RATINGS Rating 25 C ambient temperature unless otherwise specified. o TYPE NUMBER SYMBOL IEC61000-4-2, Level 4 (ESD) Pack Pulse power tp=8/20us Pack Pulse Current tp=8/20us Lead Solder Temperature - Max. (10 sec duration) Thermal Resistance Junction-to-ambient Junction and Storage Temperature Range Total Power Dissipation on FR-5 board (Note 2) Air Contact LIMITS >15 >8 40 3.5 260 430 -55 ~ +150 150 Ppp Ipp TL RθJA TJ , TSTG PD UNITS kV W A C C/W C mW o o o Stresses exceeding "Maximum Ratings" may damage the device. "Maximum Ratings" are stress ratings only. Functional operation above the recommended. Operating conditions is not implied. Extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. FR-5 = 1.0 x 0.75 x 0.62 in. 2. Only 1 diode under power. For all 4 diodes under power, PD will be 25%. Mounted on FR-4 board with min pad. ELECTRICAL CHARACTERISTICS TYPE NUMBER Reverse Stand-Off Voltage Reverse Leakage Current Peak Pulse Current Clamping Voltage Clamping Voltage Clamping Voltage Reverse Breakdown Voltage Test Current Diode Capacitance http://www.SeCoSGmbH.com/ 24-Aug-2007 Rev. A SYMBOL VRWM IR IPP VC VC Vc VBR IT Cd (T = 25 o C unless otherwise noted, Per Diode) Min. Typ. Max. UNIT 5.0 V nA 10 35 A 3.5 9.5 V V 11 12 V 7.2 V 6.1 mA 1.0 - 22 28 pF TEST CONDITIONS VRWM = 5 V IPP = 1 A IPP = 2.5A IPP = 3.5A IT = 1mA, F=1MHz,VR=0V. Any changing of specification will not be informed individual Page 1 of 2 KS05V5 VOLTAGE: 5.0 V Elektronische Bauelemente 40 W Transient Voltage Suppressors Diode ELECTRICAL CHARACTERISTIC CURVES Pulse Waveform Clamping Voltage vs. Peak Pulse Current 110 80 70 e 60 Clamping Voltage- Vc(V) 90 Percent of Ipp 15 Waveform Parameters tr = 8µs td = 20µs 100 -t 50 40 td = IPP/2 30 Waveform Parameters tr = 8µs td = 20µ 10 5 20 10 0 0 0 5 10 15 20 Time (uS) 25 0 1 2 3 4 5 6 30 Peak Pulse Current-Ipp(A) Application Information The SK05V5 is designed for the uni-direction of up to five lines of bi-derection protection of four lines from the damage caused by Electronic Discharge (ESD) and surge pulses. The SK05V5 may be used on line where the signal polarities are above or below ground. KS05V5 canwithstand and provides protection from a surge of 40 watts peakpulse power per line for a 8/20 us waveform High speed data line Typical application for uni-directional protection of five lines http://www.SeCoSGmbH.com/ 24-Aug-2007 Rev. A High speed data line Typical application for bi-directional protection of four lines Any changing of specification will not be informed individual Page 2 of 2