SENSITRON SHD220213

SENSITRON
SEMICONDUCTOR
SHD220213
TECHNICAL DATA
DATA SHEET 4139, REV -
HERMETIC POWER MOSFET
N-CHANNEL LOGIC LEVEL
FEATURES:
œ 55 Volt, 0.06 Ohm MOSFET
œ Hermetically Sealed
œ Add a “C” to the part number for ceramic seals (SHDC220213)
œ Surface Mount Package
MAXIMUM RATINGS
ALL RATINGS ARE AT TA = 25•C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT VGS = 10V, TC = 25•C
VGS = 10V, TC = 100•C
PULSED DRAIN CURRENT
@ TC = 25•C
OPERATING AND STORAGE TEMPERATURE
TERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25•C
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250 mA
DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 11A
VGS = 5V, ID = 11A
GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250mA
FORWARD TRANSCONDUCTANCE
VDS = 25V, ID = 11A
ZERO GATE VOLTAGE DRAIN CURRENT, TJ = 25•C
(VDS = 55V, VGS = 0V), TJ = 125•C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 16V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -16V
TOTAL GATE CHARGE
VGS = 5V,
GATE TO SOURCE CHARGE
VDS = 44V,
GATE TO DRAIN CHARGE
ID = 11A
TURN ON DELAY TIME
VDD = 28V,
RISE TIME
ID = 11A,
TURN OFF DELAY TIME
RG = 12W,
FALL TIME
VGS = 5V
DIODE FORWARD VOLTAGE
TJ = 25•C,IS = 11A
VGS = 0V
REVERSE RECOVERY TIME
TJ = 25•C,
IS = 11A,
di/dt ˆ 100A/msec,
REVERSE RECOVERY CHARGE
VDD ˆ 25V
INPUT CAPACITANCE
VGS = 0V, VDS = 25V,
OUTPUT CAPACITANCE
f = 1.0MHz
REVERSE TRANSFER CAPACITANCE
SYMBOL
VGS
ID
MIN.
-
TYP.
-
UNITS
Volts
Amps
-
MAX.
–16
17
11
68
+175
3.5
35
IDM
TOP/TSTG
R JC
PD
-55
-
BVDSS
55
-
-
Volts
-
-
VGS(th)
gfs
1.0
6.5
-
IDSS
-
-
IGSS
-
-
Qg
Qgs
Qgd
td(ON)
tr
td(OFF)
tf
VSD
-
-
-
-
-
RDS(ON)
trr
Qrr
Ciss
Coss
Crss
-
0.060
0.075
2.0
-
Amps
•C
•C/W
Watts
W
Volts
S(1/W)
-
25
250
100
-100
15
3.7
8.5
11
133
35
66
1.3
Volts
-
90
nsec
200
-
mC
520
140
50
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - [email protected]
mA
nA
nC
nsec
pF
SHD220213
SENSITRON
TECHNICAL DATA
DATA SHEET 4139, REV. -
MECHANICAL DIMENSIONS: in Inches / mm
LCC-5
PINOUT TABLE
DEVICE TYPE
N Channel Mosfet
PIN 1
DRAIN
PIN 2
GATE
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - [email protected]
PIN 3
SOURCE
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]