Series 11 PC mount switching solenoid valve FEATURES · 2-way or 3-way, 2 position valve (NO, NC & Distributor) · Offer a discrete valve design with a 200 million life cycle rating · Available in manifold mounting · Provide a range of electrical coil options, including PC mountable, spade lugs, or wire leads · Powerful enough for a range of uses that require high flow PHYSICAL PROPERTIES MEDIA COMPATIBILITY Gases and selected liquids Operating environment Storage temperature WETTED MATERIALS Body: 360 HO2 brass; 302 series stainless steel (passivated) Stem base: 385 HO2 brass; 303 series stainless steel (passivated) All others: FKM; EPDM; 430 FR series stainless steel (passivated); 302 series stainless steel -40 to 70 °C Length 43.9 mm (1.73 in) Width 15.9 mm (0.625 in) Height 17 mm (0.67 in) Porting 10-32 tapped ports, 1/16, 5/64 or 1/8 in stem barbs Weight 60 g (2.1 oz) 0.026 in3 (without fittings) Internal volume ELECTRICAL Power Voltage June 2007 / 259 Filtration (recommended) 0.5, 1.0 or 2.0 W 0 to 70 °C Lubrication 40 µm None required 5, 12, 24 VDC ± 10% 1/5 www.sensortechnics.com Series 11 PC mount switching solenoid valve PERFORMANCE CHARACTERISTICS Part no. Pressure 1110... 0...100 psig 1113... 0...50 psig 1116... 0...25 psig 1112... 0...70 psig 1115... 0...25 psig 1118... 0...10 psig Vacuum Orifice siz es/ Equivalent CV1 Leak rate2 R esp o n se <30 msec cycling (2 Watt) 0.030" (0.762 mm)/ 0.017 CV ≤0.016 sccm (bubble tight) 0...27 "Hg (0...13 psi) <30 msec cycling (2 Watt) 0.050" (1.270 mm)/ 0.035 CV FLOW CURVE (typical air flow)3 Notes: 1 The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. If several valves with the same nominal diameter are compared, the valve with the highest CV value has the best flow dynamics design. The equivalent european measure is the kV value expressed in m3/h (kV = 0.86 CV). 2 sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3 slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm. June 2007 / 259 2/5 www.sensortechnics.com Series 11 PC mount switching solenoid valve OUTLINE DRAWING Basic dimensions Port and mounting hole diagram PC mounting diagram June 2007 / 259 3/5 www.sensortechnics.com Series 11 PC mount switching solenoid valve VALVE TYPE Type 1 Type 2 Type 3 Type 4 June 2007 / 259 4/5 www.sensortechnics.com Series 11 PC mount switching solenoid valve COIL STYLES 11...F... (Wire leads, no terminals) 11...P... (PC mount, 4 PC pins) 11...S... (PC mount, 2 solder pads) BODY STYLES 11...0... (No barbs, face seal to manifold) 11...6... (0.062" barbs, 1/16" I.D. tubing) 11...7... (0.078" barbs, 5/64" I.D. tubing) 11...8... (0.125" barbs, 1/8" I.D. tubing, 1/4" O.D. max.) STEM STYLES 11...6 (0.062" top seat, 1/16" I.D. tubing) 11...0 (Type 1 top seat, plugged) 11...7 (0.078" top seat, 5/64" I.D. tubing) 11...8 (0.125" top seat, 1/8" I.D. tubing, 1/4" O.D. max.) ORDERING INFORMATION Model no. Series Options 11 Max. pressure Material Type C oi l Orifice size wattage Plunger B ody & se a l 10: 0...100 psi 0.030" (0.762 mm) 2W 1: 2-way NC BV: brass FK M 12: 0...70 psi 0.050" (1.27 mm) 2W 2: 2-way NO SV: FK M 13: 0...50 psi 0.030" (0.762 mm) 1W 3: 3-way NC or BE: brass EPDM distributor 15: 0...25 psi 0.050" (1.27 mm) 1W 4: 3-way NO 16: 0...25 psi 0.030" (0.762 mm) 0.5 W 18: 0...10 psi 0.050" (1.27 mm) 0.5 W SS* Voltage 5: 5 V DC Coil type Pneumatic Pneumatic connection connection body stem P: 4 PC pins 0: no barbs 0: type 1/ none S: 2 solder taps 6: 1/16" barbs 6: 1/16" barbs* 24: 24 VDC Q: Quick connect 7: 5/64" barbs 7: 5/64" barbs 8: 1/8" barbs 8: 1/8" barbs 12: 12 V D C F: Wire leads, 18", no terminals *Stainless steel Example: 11 10 3 BV *1/16" barbs not available for 0.050" orifice 12 P 7 7 Note: Not all combinations might be available. Please contact your nearest Sensortechnics sales representative for further information. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. June 2007 / 259 5/5 www.sensortechnics.com