Z-Power LED X10490 Technical Data Sheet Specification HW331A SSC Drawn Approval CUSTOMER Approval Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet CONTENTS 1. Full code of HIGH FLUX LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6. Optical characteristics 7. Color & Binning 8. Rank of HW331A 9. Packing 10. Soldering 11. Precaution for use 12. Reliability Test Item and Condition Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 1. Full Code of HIGH FLUX LED Series Full code form : X1 X2 X3 X4 X5 X6 X7X8 - X10X11 1. Part Number - X1 : Model - X2 : Number of Die *1 - X3 : Color - X4 : Lens Shape - X5 : Directivity - X6 : Revision Symbol - X7 : High Reliability *2 - X8 : Surface coloring & Diffusion *3 *1, 2, 3 are added to the Product Type only in necessary cases. 2. Internal Number - X10 - X11 3. Sticker Diagram on Box & Plastic Tube HXXXX RANK : XXXX QTY : 1200pcs LOT : 20XX.XX.XX SEOUL SEMICONDUCTOR CO., LTD DEVICE HW331A Hc14 LOT NO. 20XX.XX.XX CAT Hc14 QTY 60 D/C 07XX Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet HW331A Description This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This package LEDs are designed for high current operation and high flux output application. But the package’s design features better thermal management characteristics than other LED solutions. Because of these advantages, this product have many applications. Such as automotive tail, stop and turn signal lamps, and electronic signs etc. HW331A Features • High flux output and high luminance • Designed for high current operation • Uniform color • Low profile and low thermal resistance • Packaged in tubes for use with automatic insertion equipment Applications • Automotive exterior lighting • Electronic signs and signals • Channel letter / lighting • Decorative lighting • Specialty Lighting Rev. 00 October 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 3. Absolute maximum ratings Parameter Symbol Value Unit DC Forward Current IF 30 mA Forward Peak Pulse Current IFP [1] 100 mA Reverse Voltage VR 5 V Power Dissipation PD 120 mW Operating Temperature Topr -40 ~ 100 ºC Storage Temperature Tstg -40 ~ 100 ºC Solder Temperature TS 260ºC for 5second [2] ºC [1] t ≤ 0.1ms, D = 1/10 [2] No closer than stopper. 4. Electric & Optical characteristics Parameter Symbol Condition Min Typ Max Unit Luminous Flux [3] ФV IF=30mA 4.4 6 - lm Chromaticity Coordinate[4] X, y IF=30mA Forward Voltage[5] VF IF=30mA View Angle 2θ ½ IF=30mA 110 Deg. Thermal Resistance RθJ-P IF=30mA 130 ºC /W Reverse Current IR Vr=5V x=0.31, y=0.31 - 3.4 - - - 4.0 5 V µA [3] SSC maintains a tolerance of ±10% on flux and power measurements. [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color Coordinates Measurement allowance is ± 0.01 [5] A tolerance of ±0.05V on forward voltage measurements. [Note] All measurements were made under the standardized environment of SSC. Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 5.Outline Dimension Unit : mm CHAMFER 1.25 X 1.25 3 ± 0.2 7.62 ± 0.5 CATHODE ANODE 7.62 ± 0.5 5.08 ± 0.3 7.5 ± 0.5 1.5±0.2 0.5 0.4 ± 0.2 1.4 MAX 2.5 ± 0.5 4.4 1.1 5.0° 0.76 ± 0.1 5.08 ± 0.2 Notes : Protruded epoxy is 1.0mm maximum. Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Forward Current vs. Forward Voltage (Ta=25 OC ) Forward Current(mA) 100 10 1 2.4 2.8 3.2 3.6 4.0 4.4 Forward Voltage [V] Relative Luminous Intensity vs Forward Current (Ta=25 OC ) 3.0 Relative Luminous Flux Z-Power LED X10490 Technical Data Sheet 6. Optical characteristics 2.5 2.0 1.5 1.0 0.5 0.0 0 20 40 60 80 100 Forward Current [mA] Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Ambient Temperature vs. Allowable Forward Current Forward Current IF [mA] 40 30 20 O RthJ-A = 300 C /W 10 0 -40 -20 0 20 40 60 80 100 O Ambient Temperature TA [ C] Radiation Diagram (Ta=25 OC ) 1.0 Relative Luminous Intensity Z-Power LED X10490 Technical Data Sheet 6. Optical characteristics 0.8 0.6 0.4 0.2 0.0 -90 -60 -30 0 30 60 90 Off Axis Angle [deg.] Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Spectrum (Ta=25 OC ) 1.0 Relative Emission Intensity Z-Power LED X10490 Technical Data Sheet 6. Optical characteristics 0.5 0.0 400 500 600 700 Wavelength [nm] Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 7. Color & Binning 0.40 4600K 0.38 5600K 0.36 7000K CIE(y) 0.34 0.32 9000K 0.30 0.28 b1 c1 d b2 e lin n kia an l P c2 a 15000K 0.26 0.24 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 CIE(x) Rank b1 Rank a x 0.264 0.280 0.296 0.283 x 0.287 0.283 0.304 0.307 y 0.267 0.248 0.276 0.305 y 0.295 0.305 0.330 0.315 Rank b2 Rank c1 x 0.307 0.304 0.330 0.330 x 0.296 0.287 0.307 0.311 y 0.315 0.330 0.360 0.339 y 0.276 0.295 0.315 0.294 Rank c2 Rank d x 0.311 0.307 0.330 0.330 x 0.330 0.330 0.356 0.361 y 0.294 0.315 0.339 0.318 y 0.360 0.318 0.351 0.385 Note : Color Coordinates Measurement allowance is ± 0.01 Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 8. Rank of HW941A Bin Code Luminous Flux CIE Forward Voltage H c1 4 Luminous Flux (lm) @ IF = 30mA Bin Code Min. G 3.4 4.4 H 4.4 5.8 J 5.8 7.6 K 7.6 10.0 Max. Color Rank @ IF = 30mA a b1 b2 c1 c2 d Forward Voltage (V) @ IF = 30mA Bin Code Min. Max. 1 2.8 3.0 2 3.0 3.2 3 3.2 3.4 4 3.4 3.6 5 3.6 3.8 6 3.8 4.0 7 4.0 4.2 Available ranks Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 9. Packing Unit : mm 9.7 5.8 12 0.6 2.5 5.1 2.6 DEVICE Cathode HW331A Hc14 LOT NO. 20XX.XX.XX CAT Hc14 QTY 60 D/C 07XX Anode SEOUL SEMICONDUCTOR CO., LTD. made in Korea Top view 485±1 Side view * Plastic tube 60pcs max/tube Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 9. Packing Unit : mm * Aluminum Sealing pack (in silica gel) 1200pcs max/pack (20tubes max/pack) HXXXX RANK : XXXX QTY : 1200pcs LOT : 20XX.XX.XX SEOUL SEMICONDUCTOR CO., LTD * Cardboard box (500x220x280) (21600pcs max/box) (18packs max/box) Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 10. Soldering 1) Recommended Wave Soldering Conditions / Profile • Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max). • Soldering heat to be at 255 ºC (260ºC max) for 4 seconds (5 seconds max.) • Soak time above 200 ºC is 5 seconds 300 PEAK 250 255 ºC (260 ºC max) 200 O Temperature [ C] 4s (5s max) 150 PREHEAT 20s (60s Max) 100 85 ºC(120 ºC max) 50 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 T im e [s ] 2) Hand Soldering conditions • Not more than 3 seconds at max. 350ºC, under Soldering iron. 3) Caution • Leadframes are silver plated copper alloy. This substance has a low thermal coefficient (easily conducts heat) • No closer than 1.5mm from the base of the stopper. • The LEDs must not be repositioned after soldering. • Do not apply any stress to the lead particularly when heat. Note : In case the soldered products are reused in soldering process, we don’t guarantee the products. Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 11. Precaution for use 1) Storage • Before opening the package Avoid the absorption of moisture, we recommended to store High Flux LEDs in a dry box(or desiccator) with a desiccant . Otherwise, store them in the following environment: Temperature : 5℃~30℃ Humidity : 50% max. • After opening the package a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40℃, Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, Components should be dried for 10-12hr at 60±5℃ • Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. • Avoid quick cooling • Lead frames are silver plated copper alloy. The silver plate surface may be affected by environments which contains corrosive substances. Please avoid conditions which may cause the LEDs to corrode, tarnish or discolor. 2) Static Electricity • Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. • All devices, equipment and machinery must be properly grounded. It is recommended precautions be taken against surge voltage to the equipment that mounts the LEDs. 3) Heat Generation • Thermal is one of the important parameter to design the end product. Please consider the heat generation of the LEDs. • The operating current should be decided after considering the ambient maximum temperature of LEDs. Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 4) Others • The color of the LEDs is changed slightly an operating current and thermal. • Anti radioactive ray design is not considered for the products listed here. • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. • When the LEDs are illuminating, operating current should be decided after considering the junction temperature. Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5 • The appearance and specifications of the product may be modified for improvement without notice. Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 12. Reliability Test Item and Condition Item Condition Note Failures Life Test Ta = RT, IF = 30mA 1000hrs 0/22 High Temperature Operating Ta = 85ºC, IF = 10mA 1000hrs 0/22 Low Temperature Operating Ta = -30ºC, IF = 30mA 1000hrs 0/22 Thermal Shock Ta = -40ºC (15min) ~ 100º (15min) (Transfer time : 10sec, 1Cycle = 30min) 100 cycles 0/40 Resistance to soldering Heat Ts = 255 ± 5ºC, t = 4 ± 1sec 1 time 0/22 ESD (Human Body Model) 1kV, 1.5kΩ ; 100pF 1 time 0/22 High Temperature Storage Ta = 100ºC 1000hrs 0/22 Low Temperature Storage Ta = -40ºC 1000hrs 0/22 Temperature Humidity Storage Ta = 85ºC, RH = 85% 1000hrs 0/22 Temperature Humidity Operating Ta = 85ºC, RH = 85%, IF = 10mA 500hrs 0/22 < Judging Criteria For Reliability Tests > VF USL[1] X 1.2 IR USL X 2.0 ФV LSL [2] X 0.7 Notes : [1] USL : Upper Standard Level [2] LSL : Lower Standard Level. Rev. 03 November 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)