PQxxxGN01ZPH Series PQxxxGN01ZPH Series Low Voltage Operation,Compact Surface Mount type Low Power-Loss Voltage Regulators ■ Outline Dimensions Features (Unit : mm) 1.Low voltage output (VO=0.8 to 1.2V) 2.Low voltage operation: VIN(MIN)=1.7V 3.Output current : 1A 4.Built-in overcurrent and overheat protection functions 5.Conform to Flow Soldering SC-63 package 6.RoHS directive compliant 2.1±0.5 6.6MAX. Lead finish identification mark 5.2±0.5 (0.3) Epoxy resin (1.7) 008GN01 H (0～0.25) 0.3 +0.2 -0.1 Applications (0.3) 4-(1.27) ( 1.AV equipment 2.OA equipment (0.9) 9.7MAX. 2.5MIN. 5.5±0.5 0.7 MAX. 3 ) : Typical dimensions Product mass:(0.23g) 1 2 4 1 Model Line-up 2 Output Voltage (TYP.) Model No. 0.8V PQ008GN01ZPH 1.0V PQ010GN01ZPH 1.2V PQ012GN01ZPH 5 3 Specific IC 5 1 2 3 4 5 DC input (VIN) Bias input (VB) DC output (VO) NC GND Lead finish:Lead-free solder plating (Composition: Sn2Cu) Absolute Maximum Ratings (Ta=25°C) Parameter Symbol *1 VIN Input voltage *1 Bias supply voltage VB IO Output current *2 Power dissipation PD *3 Junction temperature Tj Operating temperature Topr Tstg Storage temperature Tsol Soldering temperature Rating Unit V 5.5 7 V A 1 8 W 150 °C °C -40 to +85 -40 to +150 °C °C 260(10s) *1 All are open except GND and applicable terminals. *2 PD:With infinite heat sink *3 Overheat protection may operate at Tj:125°C to 150°C Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: OP06052A PQxxxGN01ZPH Series Electrical Characteristics (Unless otherwise specified,condition shall be VIN=1.8V,VB=3.3V,IO=0.5A,Ta=25°C) Symbol Conditions MIN. TYP. MAX. Unit Input voltage VIN V VB - 5.5 Bias supply voltage 7 V Output voltage VO - 1.7 Load regulation Line regulation RegL RegI VIN=1.7V to 5.5V,VB=2.35 to 7V , IO=5mA Temperature coefficient of output voltage TCVO Tj=0 to +125°C, IO=5mA RR1 RR2 Refer to Fig.2 Refer to Fig.3 IB - Parameter Ripple rejection Bias inflow current IO=5mA to 1A 2.35 Refer to the following table.1 V - % 0.2 0.5 0.3 0.7 % ±0.5 - %/°C dB 2 mA 60 53 1.5 dB Table.1 Output Voltage (Unless otherwise specified,condition shall be VIN=1.8V,VB=3.3V,IO=0.5A,Ta=25°C) Model No. PQ008GN01ZPH PQ010GN01ZPH PQ012GN01ZPH Conditions Symbol VO － MIN. 0.77 TYP. MAX. 0.8 0.83 0.97 1.17 1 1.2 1.03 1.23 Unit V Fig.1 Test Circuit VO 3 1 A VB VIN A 1μF IO 2 5 IB 10μF V RL 1μF Fig.2 Test Circuit for Ripple Rejection (1) + 3 1 ei ~ IO VB VIN 2 5 1μF 10μF V ~ eo RL 1.8V 3.3V 1μF f=120Hz(sine wave) ei(rms)=0.1V VIN=1.8V VB=3.3V IO=0.3A RR=20log(ei(rms)/eo(rms)) Sheet No.: OP06052A 2 PQxxxGN01ZPH Series Fig.3 Test Circuit for Ripple Rejection (2) + 3 1 IO VB 2 eb VIN 1μF 5 ~ V ~ 10μF eo RL 1.8V 3.3V 1μF f=120Hz(sine wave) eb(rms)=0.1V VIN=1.8V VB=3.3V IO=0.3A RR=20log(ei(rms)/eo(rms)) Fig.5 Overcurrent Protection Characteristics (PQ008GN01ZPH) Fig.4 Power Dissipation vs. Ambient Temperature 1.0 PD:With infinite heat sink VIN=2.5V 8 Output voltage VO (V) Power dissipation PD (mW) 10 5 0 -40 -20 0 25 50 0.8 0.4 0.2 VB=3.3V CIN=1μF CO=10μF Ta=Room temp. 0.5 Fig.6 Overcurrent Protection Characteristics (PQ010GN01ZPH) Output voltage VO (V) Output voltage VO (V) VIN=5V 0.6 0.4 0.2 0 0 VB=3.3V CIN=1μF CO=10μF Ta=Room temp. 0.5 1.0 2.0 2.5 3.0 VIN=5V Output current IO (A) VIN=1.8V 0.8 VIN=2.5V 0.6 0.4 0 0 2.5 VIN=3.3V 1.0 0.2 1.5 2.0 1.2 VIN=3.3V VIN=1.8V 1.5 Fig.7 Overcurrent Protection Characteristics (PQ012GN01ZPH) VIN=2.5V 0.8 1.0 Output current IO (A) Ambient temperature Ta (°C) Note) Oblique line portion:Overheat protection may operate in this area. 1.0 VIN=5V 0.6 0 0 75 85 100 125 150 VIN=3.3V VIN=1.8V VB=3.3V CIN=1μF CO=10μF Ta=Room temp. 0.5 1.0 1.5 2.0 2.5 Output current IO (A) Sheet No.: OP06052A 3 PQxxxGN01ZPH Series Fig.8 Fig.9 Output Voltage vs. Ambient Temperature (PQ008GN01ZPH) 1.002 0.798 Output voltage VO (V) 0.797 Output voltage VO (V) Output Voltage vs. Ambient Temperature (PQ010GN01ZPH) 0.796 0.795 0.794 0.793 0.792 VIN=1.8V VB=3.3V IO=0.5A CIN=1μF CO=10μF 0.791 0.79 0.789 -50 -25 0 25 50 1 0.998 0.996 0.994 0.99 -50 -25 75 100 125 150 0 25 50 75 100 125 150 Ambient temperature Ta (°C) Ambient temperature Ta (°C) Fig.10 Output Voltage vs. Ambient Temperature (PQ012GN01ZPH) Fig.11 Load Regulation vs. Ambient Temperature 0.2 1.198 Load regulation RegL(%) 1.196 Output voltage VO (V) VIN=1.8V VB=3.3V IO=0.5A CIN=1μF CO=10μF 0.992 1.194 1.192 1.19 1.188 1.186 1.184 VIN=1.8V VB=3.3V IO=0.5A CIN=1μF CO=10μF 1.182 1.18 1.178 -50 -25 0 25 50 PQ010GN01ZPH 0 -0.2 PQ008GN01ZPH -0.4 -0.6 PQ012GN01ZPH VIN=1.8V VB=3.3V IO=5mA～1A CIN=1μF CO=10μF -0.8 -1 -50 -25 75 100 125 150 Ambient temperature Ta (°C) 0 25 50 75 100 125 150 Ambient temperature Ta (°C) Fig.13 Bias Inflow Current vs. Ambient Temperature Fig.12 Line Regulation vs. Ambient Temperature 1 0.7 VIN=1.8V VB=3.3V IO=0A CIN=1μF CO=10μF Bias inflow current IB (mA) Line regulation RegI (%) PQ010GN01ZPH 0.6 0.5 PQ008GN01ZPH PQ012GN01ZPH 0.4 0.3 PQ010GN01ZPH 0.2 VIN=1.7～5.5V VB=2.35～7V IO=5mA CIN=1μF CO=10μF 0.1 0 -50 -25 0 25 50 0.95 0.9 PQ012GN01ZPH 0.85 PQ008GN01ZPH 0.8 0.75 -50 -25 75 100 125 150 Ambient temperature Ta (°C) 0 25 50 75 100 125 150 Ambient temperature Ta (°C) Sheet No.: OP06052A 4 PQxxxGN01ZPH Series Fig.14 Short circuit Current vs. Ambient Temperature 2.5 1.0 2.3 2.2 Output voltage VO (V) VIN=1.8V VB=3.3V RL=Short CIN=1μF CO=10μF 2.4 Short circuit current IS (A) Fig.15 Output Voltage vs. Input Voltage (PQ008GN01ZPH) PQ012GN01ZPH 2.1 2 1.9 PQ008GN01ZPH 1.8 PQ010GN01ZPH 0.8 IO=0A 0.6 IO=0.5A(RL=1.6Ω) IO=1A(RL=0.8Ω) 0.4 VB=3.3V CIN=1μF CO=10μF Ta=Room temp. 0.2 1.7 1.6 1.5 -50 -25 0 25 50 0 0 75 100 125 150 1.0 Ambient temperature Ta (°C) 1.3 1.0 1.2 Output voltage VO (V) Output voltage VO (V) 1.1 IO=0A 0.8 IO=0.5A(RL=2Ω) IO=1A(RL=1Ω) 0.4 VB=3.3V CIN=1μF CO=10μF Ta=Room temp. 0.2 0 0 1.0 2.0 3.0 3.0 4.0 Fig.17 Output Voltage vs. Input Voltage (PQ012GN01ZPH) Fig.16 Output Voltage vs. Input Voltage (PQ010GN01ZPH) 0.6 2.0 Input voltage VIN (V) IO=0A 1.0 IO=0.5A(RL=2.4Ω) 0.8 IO=1A(RL=1.2Ω) 0.6 0.4 VB=3.3V CIN=1μF CO=10μF Ta=Room temp. 0.2 0 4.0 0 Input voltage VIN (V) 1.0 2.0 3.0 4.0 Input voltage VIN (V) Fig.18 Output Voltage vs. Bias Supply Voltage (PQ008GN01ZPH) Fig.19 Output Voltage vs. Bias Supply Voltage (PQ010GN01ZPH) 1.1 1.0 Output voltage VO (V) Output voltage VO (V) 1.0 0.8 IO=0A IO=0.5A(RL=1.6Ω) 0.6 IO=1A(RL=0.8Ω) 0.4 VIN=1.8V CIN=1μF CO=10μF Ta=Room temp. 0.2 0 0 1.0 2.0 3.0 IO=0A 0.8 IO=0.5A(RL=2Ω) 0.6 IO=1A(RL=1Ω) 0.4 VIN=1.8V CIN=1μF CO=10μF Ta=Room temp. 0.2 0 4.0 Bias supply voltage VB (V) 0 1.0 2.0 3.0 4.0 Bias supply voltage VB (V) Sheet No.: OP06052A 5 PQxxxGN01ZPH Series Fig.21 Dropout Voltage vs. Ambient Temperature (PQ012GN01ZPH) Fig.20 Output Voltage vs. Bias Supply Voltage (PQ012GN01ZPH) 0.17 1.3 0.16 IO=0A 1.0 Dropout voltage VI-O(V) Output voltage VO (V) 1.2 IO=0.5A(RL=2.4Ω) 0.8 IO=1A(RL=1.2Ω) 0.6 0.4 VIN=1.8V CIN=1μF CO=10μF Ta=Room temp. 0.2 0 1.0 0 2.0 3.0 0.15 0.14 0.13 0.12 0.1 -50 -25 4.0 Fig.22 Output Voltage Deviation vs. Output Current Output voltage deviation ΔVO (mV) Output voltage deviation ΔVO (mV) 1.5 PQ008GN01ZPH 0.5 0 -0.5 -1.0 PQ010GN01ZPH PQ012GN01ZPH -2.0 -2.5 0 0.2 0.4 0.6 0.8 1.0 VB 0.5 VIN 0 -0.5 -1.0 -1.5 -2.0 0 1.0 2.0 3.0 4.0 5.0 75 100 125 150 VIN=1.8V VB=3.3V IO=0A CIN=1μF CO=10μF Ta=Room temp. 1.5 1.0 VB 0.5 VIN 0 -0.5 -1.0 -1.5 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Fig.25 Output Voltage Deviation vs. Input Voltage / Bias Supply Voltage (PQ012GN01ZPH) Output voltage deviation ΔVO (mV) Output voltage deviation ΔVO (mV) 1.5 50 Input voltage / Bias supply voltage VIN/VB (V) Fig.24 Output Voltage Deviation vs. Input Voltage / Bias Supply Voltage (PQ010GN01ZPH) VIN=1.8V VB=3.3V IO=0A CIN=1μF CO=10μF Ta=Room temp. 2.0 -2.0 1.0 Output current IO (A) 2.0 25 Fig.23 Output Voltage Deviation vs. Input Voltage / Bias Supply Voltage (PQ008GN01ZPH) 2.0 -1.5 0 Ambient temperature Ta (°C) Bias supply voltage VB (V) 1.0 VIN=1.14V VB=3.3V IO=0.5A CIN=1μF CO=10μF 0.11 6.0 2.5 1.5 1.0 VB 0.5 VIN 0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 7.0 VIN=1.8V VB=3.3V IO=0A CIN=1μF CO=10μF Ta=Room temp. 2.0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Input voltage / Bias supply voltage VIN/VB (V) Input voltage / Bias supply voltage VIN/VB (V) Sheet No.: OP06052A 6 PQxxxGN01ZPH Series Fig.26 Input Current vs. Input Voltage (PQ008GN01ZPH) 18 20 IO=0A VB=3.3V 14 12 10 8 6 16 14 12 10 8 6 4 4 2 2 0 0 0.5 1.0 1.5 2.0 IO=0A VB=3.3V 18 Input current IIN (mA) 16 Input current IIN (mA) Fig.27 Input Current vs. Input Voltage (PQ010GN01ZPH) 0 2.5 3.0 3.5 4.0 0 Input voltage VIN (V) 2.5 IO=0A VB=3.3V 18 16 14 12 10 8 0.5 1.0 1.5 2.0 IO=1A(RL=0.8Ω) 1.5 IO=0A 0.5 2.0 2.5 3.0 2.5 VB=3.3V 2.0 IO=1A(RL=1Ω) IO=0.5A(RL=2Ω) 1.0 IO=0A 0.5 1.5 1.5 3.5 4.0 Fig.31 Bias Inflow Current vs. Input Voltage (PQ012GN01ZPH) Bias inflow current IB (mA) Bias inflow current IB (mA) 2.5 0.5 1.0 0.5 1.0 Input voltage VIN (V) Fig.30 Bias Inflow Current vs. Input Voltage (PQ010GN01ZPH) 0 0 IO=0.5A(RL=1.6Ω) 1.0 0 0 2.5 3.0 3.5 4.0 VB=3.3V 2.0 Input voltage VIN (V) 1.5 2.5 3.0 3.5 4.0 Fig.29 Bias Inflow Current vs. Input Voltage (PQ008GN01ZPH) Bias inflow current IB (mA) Input current IIN (mA) 26 24 22 20 0 1.5 2.0 Input voltage VIN (V) Fig.28 Input Current vs. Input Voltage (PQ012GN01ZPH) 6 4 2 0 0.5 1.0 2.0 2.5 3.0 2.0 IO=1A(RL=1.2Ω) 1.5 Input voltage VIN (V) IO=0.5A(RL=2.4Ω) 1.0 IO=0A 0.5 0 0 3.5 4.0 VB=3.3V 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Input voltage VIN (V) Sheet No.: OP06052A 7 PQxxxGN01ZPH Series Fig.32 Bias Inflow Current vs. Bias Supply Voltage (PQ008GN01ZPH) 2.5 VIN=1.8V Bias inflow current IB (mA) Bias inflow current IB (mA) 2.5 Fig.33 Bias Inflow Current vs. Bias Supply Voltage (PQ010GN01ZPH) 2.0 IO=1A(RL=0.8Ω) 1.5 IO=0.5A(RL=1.6Ω) 1.0 IB IO=0A 0.5 0 0 0.5 1.0 1.5 2.0 2.5 3.0 2.0 IO=1A(RL=1Ω) 1.5 IB Ripple rejection RR (dB) Bias inflow current IB (mA) 70 IO=1A(RL=1.2Ω) IO=0.5A(RL=2.4Ω) 1.0 IO=0A 0.5 0 0 0.5 1.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 3.5 4.0 Fig.35 Ripple Rejection vs. Input Ripple Frequency (PQ012GN01ZPH) VIN=1.8V IB 0.5 1.0 Bias supply voltage VB (V) Fig.34 Bias Inflow Current vs. Bias Supply Voltage (PQ012GN01ZPH) 1.5 IO=0A 0.5 Bias supply voltage VB (V) 2.0 IO=0.5A(RL=2Ω) 1.0 0 0 3.5 4.0 VIN=1.8V 3.5 4.0 VIN 60 50 VB 40 30 VIN=1.8V 20 VB=3.3V ei(rms)=0.1V IO=0.3A 10 CO=10μF 0 Ta=Room temp. 0.1 1 10 100 1 000 Input ripple frequency f (kHz) Bias supply voltage VB (V) Fig.36 Ripple Rejection vs. Output Current (PQ012GN01ZPH) Ripple rejection RR (dB) 80 70 VIN 60 VB 50 40 30 VIN=1.8V 20 VB=3.3V ei(rms)=0.1V f=120HZ 10 CO=10μF 0 Ta=Room temp. 0 0.2 0.4 0.6 0.8 1.0 1.2 Output current IO (A) Sheet No.: OP06052A 8 PQxxxGN01ZPH Series Fig.37 Power Dissipation vs. Ambient Temperature (Typical Value) Power dissipation PD (W) Cu area 740mm2 2.0 1.5 Mounting PCB Cu area 180mm2 PCB Cu Cu area 100mm2 Cu area 70mm2 1 Cu area 36mm2 Material : Glass-cloth epoxy resin Size : 50×50×1.6mm Cu thickness : 35μm 0.5 0 -40 -20 0 20 40 60 80 100 120 Ambient temperature Ta (°C) Sheet No.: OP06052A 9