TOREX XC6415CD01MR

XC6415 Series
ETR0332-006a
Dual LDO Regulators with ON/OFF Switch
■GENERAL DESCRIPTION
XC6415 series are highly accurate, Dual, low noise, CMOS LDO voltage regulators. Performance features of the series include
low output noise, high ripple rejection rate, and low dropout. Extremely dense power supply circuit can be organized with a 2
channeled high speed voltage regulator in low ON resistance which is built-in to an ultra small USP-6C package. The output
voltage for each regulator is set independently by laser trimming and selectable in 0.05V increments within a range of 0.8 to 5.0V.
The EN function allows the output of each regulator to be turned off independently. In this state, with the XC6415 series, the IC
turns on the internal switch located between the VOUT and the VSS pins. This short enables the electric charge at the output
capacitor (CL) to be discharged via the internal auto-discharge resistance, and as a result the VOUT pin quickly returns to the VSS
level. The series’ output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The high level of
output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance.
Because regulator 1 and 2 are completely isolated, a cross talk between each channel, which causes a problem during load
fluctuations, can be greatly reduced
■APPLICATIONS
■FEATURES
Output Current
Dropout Voltage
● Mobile phones
● Cordless phones, Wireless communication equipment
● Portable games
● Digital still cameras, Digital video cameras
● Portable audio equipment
● PDAs
■TYPICAL APPLICATION CIRCUITS
: 200mA (300mA limit, TYP.)
: 95mV @ IOUT=100mA
VOUT(T)=3.0V
Operating Voltage Range
: 1.5V~6.0V
Output Voltage Range
: 0.8V~5.0V
(0.05V increments)
High Accuracy
: + 1% @ VOUT>2.0V
: + 2% @ VOUT≧1.5V
: + 20mV @VOUT<2.0V
: + 30mV @VOUT＜1.5V
Low Power Consumption
: 28μA/ch (TYP.)
Stand-by Current
: Less than 0.1μA
Ripple Rejection
: 65dB@1kHz
Operating Temperature Range: - 40OC ~ 85OC
Low ESR Capacitor
: 1.0μF ceramic capacitor
compatible
Small Packages
: USP-6C, SOT-26, USPN-6
■TYPICAL PERFORMANCE
CHARACTERISTICS
6
1
● Cross Talk
XC6415(VOUT1=3.3V, VOUT2=2.5V)
5
250
Output Voltage(VR1) : VOUT (V)
4
3
3.35
200
Output Voltage(VR1 : 10mA)
3.30
3.25
150
Output Current
（VR2 : 0.1mA→50mA)
3.20
100
50
3.15
Output Current(VR2) : IOUT
(mA)
2
3.40
VIN=4.3V, tr=tf=5μS, Ta=25℃
IOUT2=0.1→50mA, CIN=CL1=CL2=1.0μF(ceramic)
0
Time (200uS/div)
1/23
XC6415 Series
■PIN CONFIGURATION
VOUT1
VSS
VOUT2
6
5
4
VOUT2 6
1 EN2
VOUT1 5
2 VIN
VSS 4
1
2
3
EN1
VIN
EN2
SOT-26
VOUT2 6
1 EN2
VOUT1 5
2 VIN
3 EN1
VSS 4
USP-6C *
SOT-26
(TOP VIEW)
USPN-6
USP-6C *
(BOTTOM VIEW)
(BOTTOM VIEW)
(TOP VIEW)
3 EN1
USPN-6
(BOTTOM VIEW)
(BOTTOM VIEW)
*The dissipation pad for the USP-6C package should be solder-plated in recommended mount
pattern and metal masking so as to enhance mounting strength and heat release.
If the pad needs
to be connected to other pins, if should be connected to the VSS (No. 4) pin.
■PIN ASSIGNMENT
PIN NUMBER
SOT-26
2/23
USP-6C
USPN-6
PIN NAME
FUNCTIONS
1
3
3
EN1
ON/OFF Control 1
2
2
2
VIN
Power Input
3
1
1
EN2
4
6
6
VOUT2
Output 2
ON/OFF Control 2
5
4
4
VSS
Ground
6
5
5
VOUT1
Output 1
XC6415
Series
■PRODUCT CLASSIFICATION
●Ordering Information
XC6415①②③④⑤⑥-⑦(*1)
DESIGNATOR
(*1)
(*2)
DESCRIPTION
SYMBOL
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
①
Type of Regulator 1
(All EN High Active)
②
Type of Regulator 2
(All EN High Active)
③④
Output Voltage
01 ~
⑤⑥-⑦
Packages
Taping Type (*2)
MR
ER-G
ER
7R-G
DESCRIPTON
(without EN1 pulled down resistor) (Accuracy 1%) (without CL discharge)
(without EN1 pulled down resistor) (Accuracy 1%) (with CL discharge)
(without EN1 pulled down resistor) (Accuracy 2%) (without CL discharge)
(without EN1 pulled down resistor) (Accuracy 2%) (with CL discharge)
(with EN1 pulled down resistor) (Accuracy 1%) (without CL discharge)
(with EN1 pulled down resistor) (Accuracy 1%) (with CL discharge)
(with EN1 pulled down resistor) (Accuracy 2%) (without CL discharge)
(with EN1 pulled down resistor) (Accuracy 2%) (with CL discharge)
(without EN2 pulled down resistor) (Accuracy 1%) (without CL discharge)
(without EN2 pulled down resistor) (Accuracy 1%) (with CL discharge)
(without EN2 pulled down resistor) (Accuracy 2%) (without CL discharge)
(without EN2 pulled down resistor) (Accuracy 2%) (with CL discharge)
(with EN2 pulled down resistor) (Accuracy 1%) (without CL discharge)
(with EN2 pulled down resistor) (Accuracy 1%) (with CL discharge)
(with EN2 pulled down resistor) (Accuracy 2%) (without CL discharge)
(with EN2 pulled down resistor) (Accuracy 2%) (with CL discharge)
Internally set sequential number relating output voltage of each regulators;
Regulator 1 Output Voltage Setting Range: 0.8 ~ 5.0V (0.05V increments)
Regulator 2 Output Voltage Setting Range: 0.8 ~ 5.0V (0.05V increments)
SOT-26
USP-6C (Halogen & Antimony free)
USP-6C
USPN-6 (Halogen & Antimony free)
The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office or
representative. (Standard orientation: ⑤R-⑦, Reverse orientation: ⑤L-⑦)
DESIGNATOR ③④
③④
VR1
VR2
③④
VR1
VR2
③④
VR1
VR2
01
1.80
2.80
11
1.30
1.50
21
1.50
2.80
02
1.20
2.90
12
2.80
2.80
22
1.80
3.00
03
1.80
1.80
13
2.50
3.30
23
1.85
2.80
04
1.50
2.70
14
3.00
3.30
24
1.85
3.30
05
2.85
2.85
15
1.20
1.80
25
2.60
2.80
06
1.80
3.30
16
2.80
3.30
26
1.50
1.50
07
3.00
3.00
17
3.30
3.30
27
2.00
3.00
08
2.80
1.80
18
3.10
3.10
28
3.30
1.80
09
1.20
1.20
19
2.80
1.50
29
3.30
1.75
10
1.10
1.30
20
1.30
2.80
30
2.10
4.10
*For other combinations, output voltages and etc., please ask Torex sales contacts.
3/23
XC6415 Series
■BLOCK DIAGRAMS
VIN
EN1
EN1
VR1
ON/OFF
Control
+
Error
Amp 1
VIN
-
Current
Limit
EN1
each
circuit
VR1
ON/OFF
Control
EN1
VOUT1
EN 1/
+
Error
Amp 1
Current
Limit
each
circuit
V OUT1
EN1/
R11
R11
R12
R12
Voltage
Reference
EN2
Error
Amp 2
V SS
-
Current
Limit
EN2
+
each
circuit
VR2
ON/OFF
Control
EN2
VOUT2
EN 2/
EN1/
Voltage
Reference
VSS
EN2
VR2
ON/OFF
Control
Rdischg
Error
Amp 2
Current
Limit
+
each
circuit
V OUT2
EN2/
R21
R21
R22
R22
Voltage
Reference
Rdischg
EN2/
Voltage
Reference
<XC6415AA, CC Series>
<XC6415BB, DD Series>
VIN
EN1
EN 1
VR1
ON/OFF
Control
Error
Amp 1
VIN
-
Current
Limit
EN1
+
each
circuit
VR1
ON/OFF
Control
EN1
VOUT1
EN 1/
Error
Amp 1
Current
Limit
+
each
circuit
V OUT1
EN1/
R11
R11
R12
R12
Voltage
Reference
EN 2
Error
Amp 2
V SS
-
Current
Limit
EN2
+
each
circuit
VR2
ON/OFF
Control
EN2
VOUT2
EN 2/
EN1/
Voltage
Reference
VSS
EN2
VR2
ON/OFF
Control
Rdischg
Error
Amp 2
Current
Limit
+
each
circuit
V OUT2
EN2/
R21
R21
R22
R22
Voltage
Reference
Rdischg
EN2/
Voltage
Reference
<XC6415EE, GG Series>
<XC6415FB, HD Series>
* Diodes inside the circuits are ESD protection diodes and parasitic diodes.
■ABSOLUTE MAXIMUM RATINGS
PARAMETER
Input Voltage
Output Current
Output Voltage 1 / Output Voltage 2
EN1/EN2 Input Voltage
SOT-26
Power Dissipation
USP-6C
USPN-6
Operating Temperature Range
Storage Temperature Range
SYMBOL
VIN
IOUT1 + IOUT2
VOUT1 / VOUT2
VEN1 / VEN2
Pd
Topr
Tstg
Ta=25OC
RATINGS
- 0.3 ~ + 6.5
500 (*1)
VSS - 0.3 ~ VIN + 0.3
VSS - 0.3 ~ + 6.5
250
100
1000 （PCB mounted）(*2)
100
- 40 ~ + 85
- 55 ~ + 125
*1: Please use within the range of Pd > { (VIN-VOUT1)×IOUT1 + (VIN-VOUT2)×IOUT2 }
*2: The power dissipation figure shown is PCB mounted. Please refer to page 21 for details.
4/23
UNITS
V
mA
V
V
mW
℃
℃
XC6415
Series
■ELECTRICAL CHARACTERISTICS
● XC6415 Series
Ta=25℃
Regulator 1, Regulator 2
PARAMETER
Output Voltage
SYMBOL
VOUT(E)
(*2)
Output Current
Load Regulation
Dropout Voltage (*5)
Supply Current
Stand-by Current
IOUTMAX
ΔVOUT
Vdif
ISS
ISTBY
Line Regulation
ΔVOUT/
(ΔVIN・VOUT)
Input Voltage
VIN
Output Voltage
ΔVOUT/
Temperature Characteristics (ΔTa・VOUT)
Ripple Rejection Rate
PSRR
Limit Current
Short Current
EN ”H” Level Voltage
EN ”L” Level Voltage
ILIM
ISHORT
VENH
VENL
EN ”H” Level Current
IENH
EN ”L” Level Current
CL Discharge Resistor (*8)
IENL
RDCHG
CONDITIONS
VOUT(T)≧2.0V,
VEN=VIN, IOUT=10mA
VOUT≦1.95V,
VEN=VIN, IOUT=10mA
VOUT(T)≧1.5V
VEN=VIN、IOUT=10mA
VOUT≦1.45V
VEN=VIN、IOUT=10mA
×0.99
MIN.
MAX.
×1.01
(*3)
(*3)
(*3)
×0.98
VEN=VIN, IOUT=30mA
-40℃≦Ta≦85℃
VIN={VOUT(T)+1.0}VDC+0.5Vp-pAC
: VOUT(T)≦4.75V,
VEN=VIN, IOUT=30mA, f=1kHz
VIN=5.75VDC+0.5Vp-pAC
: VOUT(T)≧4.8V,
VEN=VIN, IOUT=30mA, f=1kHz
VEN=VIN
VEN=VIN, Short VOUT to VSS level
VEN=VIN（A～D Series）
VEN=VIN=6V（E～H Series）
VEN=VSS
VIN=6.0V, VOUT=4.0V, VCE=VSS
UNITS CIRCUITS
+0.02
-0.02
(*3)
VOUT(T)
(*4)
×1.02
(*3)
(*3)
-0.03
+0.03
(*3)
(*3)
200
VEN=VIN, 0.1mA≦IOUT≦100mA
IOUT=100mA, VEN=VIN
VIN=VEN=VOUT(T)+1.0V, IOUT=0mA
VIN=6.0V, VEN=VSS
VOUT(T)+0.5V≦VIN≦6.0V
：VOUT(T)≧1.0V,
VEN=VIN, IOUT=10mA
1.5V≦VIN≦6.0V
：VOUT(T)≦0.95V
VEN=VIN, IOUT=10mA
TYP.
-
V
①
①
①
①
②
②
-
E-1
E-2
28
0.01
60
0.10
mA
mV
mV
μA
μA
-
0.01
0.20
%/V
①
1.5
-
6.0
V
①
-
±100
-
ppm/℃
-
65
-
dB
③
210
1.2
-0.1
-0.1
-
300
20
3.0
550
6.0
0.3
0.1
0.1
-
mA
mA
V
V
①
①
①
①
μA
①
μA
Ω
①
①
①
NOTE:
*1) Unless otherwise stated, VIN=VOUT(T) +1.0V.
*2) VOUT(E)= Effective output voltage (see the voltage chart)
(ie. The output voltage when “VOUT(T)+1.0V” is provided at the VIN pin while maintaining a certain IOUT value.
*3) Characteristics of the actual VOUT(E) by setting output voltage is shown in the voltage chart.
*4) VOUT(T): Nominal output voltage
(*7)
(*6)
*5) Vdif={VIN1 - VOUT1 }
*6) VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+1.0V} is input.
*7) VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*8) For XC6415B, D, F, H series only.
XC6415A, C, E, G series discharge with only Rx1 and Rx2 resistors as shown in the BLOCK DIAGRAMS.
*9) Each channel is measured when the other channel is turned off (VEN=VSS).
5/23
XC6415 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart
NOMINAL
OUTPUT
VOLTAGE
(V)
VOUT(T)
0.80
0.85
0.90
0.95
1.00
1.05
1.10
1.15
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.65
1.70
1.75
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.15
2.20
2.25
2.30
2.35
2.40
2.45
2.50
2.55
2.60
2.65
2.70
2.75
2.80
2.85
2.90
2.95
6/23
OUTPUT VOLTAGE
(V)
VOUT(E) 1% Accuracy
MIN.
MAX.
VOUT(E)2% Accuracy
MIN.
MAX.
0.7800
0.8300
0.8800
0.9300
0.9800
1.0300
1.0800
1.1300
1.1800
1.2300
1.2800
1.3300
1.3800
1.4300
1.4800
1.5300
1.5800
1.6300
1.6800
1.7300
1.7800
1.8300
1.8800
1.9300
1.9800
2.0295
2.0790
2.1285
2.1780
2.2275
2.2770
2.3265
2.3760
2.4255
2.4750
2.5245
2.5740
2.6235
2.6730
2.7225
2.7720
2.8215
2.8710
2.9205
0.7700
0.8200
0.8700
0.9200
0.9700
1.0200
1.0700
1.1200
1.1700
1.2200
1.2700
1.3200
1.3700
1.4200
1.4700
1.5190
1.5680
1.6170
1.6660
1.7150
1.7640
1.8130
1.8620
1.9110
1.9600
2.0090
2.0580
2.1070
2.1560
2.2050
2.2540
2.3030
2.3520
2.4010
2.4500
2.4990
2.4580
2.8970
2.6460
2.6950
2.7440
2.7930
2.8420
2.8910
0.8200
0.8700
0.9200
0.9700
1.0200
1.0700
1.1200
1.1700
1.2200
1.2700
1.3200
1.3700
1.4200
1.4700
1.5200
1.5700
1.6200
1.6700
1.7200
1.7700
1.8200
1.8700
1.9200
1.9700
2.0200
2.0705
2.1210
2.1715
2.2220
2.2725
2.3230
2.3735
2.4240
2.4745
2.5250
2.5755
2.6260
2.6765
2.7270
2.7775
2.8280
2.8785
2.9290
2.9795
0.8300
0.8800
0.9300
0.9800
1.0300
1.0800
1.1300
1.1800
1.2300
1.2800
1.3300
1.3800
1.4300
1.4800
1.5300
1.5810
1.6320
1.6830
1.7340
1.7850
1.8360
1.8870
1.9380
1.9890
2.0400
2.0910
2.1420
2.1930
2.2440
2.2950
2.3460
2.3970
2.4480
2.4990
2.5500
2.6010
2.6520
2.7030
2.7540
2.8050
2.8560
2.9070
2.9580
3.0090
LOAD REGULATION
E-1
(mV)
△VOUT
TYP.
MAX.
10
DROPOUT VOLTAGE
E-2
(mV)
Vdif
TYP.
MAX.
500
850
410
750
360
600
330
600
280
420
240
360
200
300
180
260
170
240
150
200
30
120
20
50
180
110
95
150
XC6415
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart (Continued)
NOMINAL
OUTPUT
VOLTAGE
(V)
VOUT(T)
3.00
3.05
3.10
3.15
3.20
3.25
3.30
3.35
3.40
3.45
3.50
3.55
3.60
3.65
3.70
3.75
3.80
3.85
3.90
3.95
4.00
4.05
4.10
4.15
4.20
4.25
4.30
4.35
4.40
4.45
4.50
4.55
4.60
4.65
4.70
4.75
4.80
4.85
4.90
4.95
5.00
OUTPUT VOLTAGE
(V)
VOUT(E) 1% Accuracy
MIN.
MAX.
VOUT(E)2% Accuracy
MIN.
MAX.
2.9700
3.0195
3.0690
3.1185
3.1680
3.2175
3.2670
3.3165
3.3660
3.4155
3.4650
3.5145
3.5640
3.6135
3.6630
3.7125
3.7620
3.8115
3.8610
3.9105
3.9600
4.0095
4.0590
4.1085
4.1580
4.2075
4.2570
4.3065
4.3560
4.4055
4.4550
4.5045
4.5540
4.6035
4.6530
4.7025
4.7520
4.8015
4.8510
4.9005
4.9500
2.9400
2.9890
3.0380
3.0870
3.1360
3.1850
3.2340
3.2830
3.3320
3.3810
3.4300
3.4790
3.5280
3.5770
3.6260
3.6750
3.7240
3.7730
3.8220
3.8710
3.9200
3.9690
4.0180
4.0670
4.1160
4.1650
4.2140
4.2630
4.3120
4.3610
4.4100
4.4590
4.5080
4.5570
4.6060
4.6550
4.7040
4.7530
4.8020
4.8510
4.9000
3.0300
3.0805
3.1310
3.1815
3.2320
3.2825
3.3330
3.3835
3.4340
3.4845
3.5350
3.5855
3.6360
3.6865
3.7370
3.7875
3.8380
3.8885
3.9390
3.9895
4.0400
4.0905
4.1410
4.1915
4.2420
4.2925
4.3430
4.3935
4.4440
4.4945
4.5450
4.5955
4.6460
4.6965
4.7470
4.7975
4.8480
4.8985
4.9490
4.9995
5.0500
3.0600
3.1110
3.1620
3.2130
3.2640
3.3150
3.3660
3.4170
3.4680
3.5190
3.5700
3.6210
3.6720
3.7230
3.7740
3.8250
3.8760
3.9270
3.9780
4.0290
4.0800
4.1310
4.1820
4.2330
4.2840
4.3350
4.3860
4.4370
4.4880
4.5390
4.5900
4.6410
4.6920
4.7430
4.7940
4.8450
4.8960
4.9470
4.9980
5.0490
5.1000
LOAD REGULATION
E-1
(mV)
△VOUT
TYP.
MAX.
DROPOUT VOLTAGE
E-2
(mV)
Vdif
TYP.
MAX.
95
20
50
150
80
30
60
120
7/23
XC6415 Series
■OPERATIONAL DESCRIPTION
<Output Voltage Control>
The voltage divided by resistors Rx1 and Rx2 is compared with the internal reference voltage by the error amplifier. The
P-channel MOSFET which is connected to the VOUT pin is then driven by the subsequent output signal. The output voltage at
the VOUT pin is controlled and stabilized by a system of negative feedback. The current limit circuit and short protect circuit
operate in relation to the level of output current. Further, the IC's internal circuitry can be shutdown via the EN pin's signal.
< XC6415BB Series >
<CL Auto-Discharge Function>
XC6415B, D, F, H series can quickly discharge the electric charge at the output capacitor (CL), when a low signal to the EN
pin, which enables a whole IC circuit put into OFF state, is inputted via the N-channel transistor located between the VOUT
pin and the VSS pin (cf. BLOCK DIAGRAM). The CL discharge resistance is set to 550Ω when VIN is 6.0V (TYP.) and VOUT
is 4.0V (TYP.). Moreover, discharge time of the output capacitor (CL) is set by the CL auto-discharge resistance (R) and the
output capacitor (CL). By setting time constant of a CL auto-discharge resistance value [R] and an output capacitor value
(CL) as τ(τ=C x R), the output voltage after discharge via the N channel transistor is calculated by the following formulas.
V = VOUT x e –t/τ, or ｔ=τln（ VOUT(E) / V ）
( V : Output voltage after discharge, VOUT(E) : Output voltage, t: Discharge time,
τ: CL auto-discharge resistance R×Output capacitor (CL) value C)
CL high-speed discharge function can be set by each regulator.
<Current Limiter, Short-Circuit Protection>
The XC6415 series includes a fold-back circuit, which aid the operations of the current limiter and circuit protection. When
the load current reaches the current limit level, the fold-back circuit operates and output voltage drops. As a result of this
drop in output voltage, output current also decreases. When the output pin is shorted, a current of about 20mA flows.
<EN Pin>
The IC's internal circuitry can be shutdown via the signal from the EN pin with the XC6415 series. In shutdown mode,
output at the VOUT pin will be pulled down to the VSS level via Rx1 & Rx2. However, as for the XC6415B, D, F, H series,
the CL auto-discharge resistor is connected in parallel to Rx1 and Rx2 while the power supply is applied to the VIN pin.
Therefore, time until the VOUT pin reaches the VSS level becomes short. The EN pin is CMOS input, but in case the EN
pin with pulled down resistor, the EN input current will be increase when the IC operates. Also, in case of the EN pin
without pulled down resistor, the output voltage becomes unstable when the EN pin is left open. If this IC is used with the
correct output voltage for the EN pin, the logic is fixed and the IC will operate normally. However, supply current may
increase as a result of through current in the IC's internal circuitry when medium voltage is input.
■NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded.
2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output
current. Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible.
8/23
XC6415
Series
■TEST CIRCUITS
●Circuit ①
●Circuit ②
●Circuit ③
9/23
XC6415 Series
■TYPICAL PERFORMANCE CHARACTERISTICS
* EN Voltage condition: Unless otherwise stated, VEN=VIN
(1)　OutputVoltage vs. OutputCurrent
XC6415(VOUT=0.8V)
XC6415(VOUT=0.8V)
VIN=1.8V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
VIN=1.8V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
1
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
1
0.8
0.6
Ta=85℃
0.4
Ta=25℃
Ta=-40℃
0.2
0.8
0.6
VIN=1.6V
VIN=1.8V
VIN=2.3V
VIN=6.0V
0.4
0.2
0
0
0
50
100 150 200 250 300 350 400
OutputCurrent : IOUT (mA)
0
50
XC6415(VOUT=1.5V)
XC6415(VOUT=1.5V)
VIN=2.5V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
1.8
1.5
1.5
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
VIN=2.5V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
1.8
1.2
0.9
0.6
Ta=85℃
Ta=25℃
0.3
100 150 200 250 300 350 400
OutputCurrent : IOUT (mA)
1.2
0.9
VIN=1.6V
0.6
VIN=1.8V
VIN=2.0V
0.3
VIN=2.5V
Ta=-40℃
VIN=6.0V
0
0
0
50
100 150 200 250 300
OutputCurrent : IOUT (mA)
350
0
400
50
XC6415(VOUT=2.8V)
2.8
2.8
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
3.2
2.4
2.0
1.6
1.2
Ta=85℃
Ta=25℃
2.4
2.0
1.6
1.2
VIN=2.9V
VIN=3.1V
VIN=3.3V
VIN=3.8V
VIN=6.0V
0.8
0.4
Ta=-40℃
0.0
0.0
0
10/23
400
VIN=3.8V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
VIN=3.8V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
0.4
350
XC6415(VOUT=2.8V)
3.2
0.8
100 150 200 250 300
OutputCurrent : IOUT (mA)
50
100 150 200 250 300
OutputCurrent : IOUT (mA)
350
400
0
50
100 150 200 250 300
OutputCurrent : IOUT (mA)
350
400
XC6415
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(1)　OutputVoltage vs. OutputCurrent (Continued)
XC6415(VOUT=5.0V)
XC6415(VOUT=5.0V)
VIN=6.0V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
6
5
5
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
VIN=6.0V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
6
4
3
2
Ta=85℃
Ta=25℃
1
4
3
2
VIN=5.1V
VIN=5.3V
1
VIN=5.5V
Ta=-40℃
VIN=6.0V
0
0
0
50
100 150 200 250 300
OutputCurrent : IOUT (mA)
350
0
400
50
100 150 200 250 300
OutputCurrent : IOUT (mA)
350
400
(2)　OutputVoltage vs. InputVoltage
XC6415(VOUT=0.8V)
XC6415(VOUT=0.8V)
Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
0.90
1.0
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
0.9
0.8
0.7
0.6
0.5
0.4
0.3
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=100mA
0.2
0.1
0.0
0.85
0.80
0.75
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=100mA
0.70
0.65
0.0
1.0
2.0
3.0
4.0
InputVoltage : VIN (V)
5.0
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
InputVoltage : VIN (V)
6.0
XC6415(VOUT=1.5V)
XC6415(VOUT=1.5V)
Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
1.60
1.0
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=100mA
0.5
0.0
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
2.0
1.5
Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
1.55
1.50
1.45
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=100mA
1.40
1.35
0.0
1.0
2.0
3.0
4.0
InputVoltage : VIN (V)
5.0
6.0
2.5
3.0
3.5
4.0
4.5
5.0
InputVoltage : VIN (V)
5.5
6.0
11/23
XC6415 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2)　OutputVoltage vs. InputVoltage (Continued)
XC6415(VOUT=2.8V)
XC6415(VOUT=2.8V)
Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
2.4
2.0
1.6
1.2
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=100mA
0.8
0.4
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
3.2
2.8
Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
2.90
0.0
2.85
2.80
2.75
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=100mA
2.70
2.65
0.0
1.0
2.0
3.0
4.0
InputVoltage : VIN (V)
5.0
6.0
3.5
XC6415(VOUT=5.0V)
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
6.0
5.0
4.0
3.0
IOUT=1mA
IOUT=10mA
IOUT=30mA
Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
5.10
6.0
1.0
4.5
5.0
5.5
InputVoltage : VIN (V)
XC6415(VOUT=5.0V)
Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
2.0
4.0
5.05
5.00
4.95
IOUT=1mA
IOUT=10mA
4.90
IOUT=30mA
IOUT=100mA
IOUT=100mA
0.0
4.85
0.0
1.0
2.0
3.0
4.0
InputVoltage : VIN (V)
5.0
6.0
5.2
5.4
5.6
5.8
InputVoltage : VIN (V)
6
(3)　DropoutVoltage vs. OutputCurrent
XC6415(VOUT=0.8V)
XC6415(VOUT=1.5V)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
1.0
0.5
0.8
Dropout Voltage:
Vdif(V)
(V)
OutputVoltage
: Vdif
DropoutVoltage : Vdif (V)
0.9
※ Below the minimum operating
0.7
0.6
0.5
0.4
0.3
Ta=85℃
0.2
Ta=25℃
0.1
0.3
0.2
Ta=85℃
Ta=25℃
0.1
Ta=-40℃
Ta=-40℃
0.0
0.0
0
12/23
0.4
50
100
150
OutputCurrent : IOUT (mA)
200
0
50
100
150
OutputCurrent : IOUT (mA)
200
XC6415
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3)　DropoutVoltage vs. OutputCurrent (Continued)
XC6415(VOUT=2.8V)
XC6415(VOUT=5.0V)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
0.5
Ta=85℃
0.4
Dropout Voltage: Vdif (V)
OutputVoltage
: Vdif (V)
DropoutVoltage : Vdif (V)
0.5
Ta=25℃
Ta=-40℃
0.3
0.2
0.1
0.0
Ta=85℃
0.4
Ta=25℃
Ta=-40℃
0.3
0.2
0.1
0.0
0
50
100
150
OutputCurrent : IOUT (mA)
200
0
50
100
150
OutputCurrent : IOUT (mA)
200
(4)　SupplyCurrent vs. InputVoltage
XC6415(VOUT=0.8V)
XC6415(VOUT=1.5V)
60
60
Ta=85℃
Ta=25℃
50
SupplyCurrent : ISS (μA)
SupplyCurrent : ISS (μA)
Ta=85℃
Ta=-40℃
40
30
20
10
0
50
Ta=25℃
Ta=-40℃
40
30
20
10
0
0
1
2
3
4
InputVoltage : VIN (V)
5
6
0
1
XC6415(VOUT=2.8V)
2
3
4
InputVoltage : VIN (V)
6
XC6415(VOUT=5.0V)
60
60
Ta=85℃
Ta=85℃
Ta=25℃
50
SupplyCurrent : ISS (μA)
SupplyCurrent : ISS (μA)
5
Ta=-40℃
40
30
20
10
Ta=25℃
50
Ta=-40℃
40
30
20
10
0
0
0
1
2
3
4
InputVoltage : VIN (V)
5
6
0
1
2
3
4
InputVoltage : VIN (V)
5
6
13/23
XC6415 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5)　OutputVoltage vs. AmbientTemperature
XC6415(VOUT=1.5V)
XC6415(VOUT=0.8V)
VIN=1.8V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
VIN=2.5V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
1.60
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
0.90
0.85
0.80
IOUT=1mA
0.75
IOUT=10mA
IOUT=30mA
1.55
1.50
IOUT=1mA
1.45
IOUT=10mA
IOUT=30mA
IOUT=100mA
IOUT=100mA
1.40
0.70
-50
-25
0
25
50
75
AmbientTemperature : Ta (℃)
-50
100
XC6415(VOUT=2.8V)
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
VIN=6.0V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
5.20
IOUT=1mA
IOUT=1mA
IOUT=10mA
2.85
IOUT=30mA
IOUT=100mA
2.80
2.75
IOUT=10mA
5.10
IOUT=30mA
IOUT=100mA
5.00
4.90
4.80
2.70
-50
-25
0
25
50
75
AmbientTemperature : Ta (℃)
-50
100
(6)　SupplyCurrent vs. AmbientTemperature
1.2
EN Threshold
Voltage
VEN (V)
SupplyCurrent
: I : (μA)
SS
SupplyCurrent : ISS (μA)
40
30
20
VOUT=0.8V
VOUT=1.5V
VOUT=2.8V
VOUT=5.0V
10
0
-50
100
XC6415
VIN=VOUT+1.0V
50
-25
0
25
50
75
AmbientTemperature : Ta (℃)
(7)　EN Threshold Voltage vs. AmbientTemperature
XC6415
14/23
100
XC6415(VOUT=5.0V)
VIN=3.8V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
2.90
-25
0
25
50
75
AmbientTemperature : Ta (℃)
-25
0
25
50
75
AmbientTemperature : Ta (℃)
100
1.0
0.8
0.6
0.4
EN"H"LEVEL
0.2
EN"L"LEVEL
0.0
-50
-25
0
25
50
75
AmbientTemperature : Ta (℃)
100
XC6415
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8)　Rising Response Time
XC6415(VOUT=0.8V)
XC6415(VOUT=1.5V)
tr=5μS, Ta=25℃
VIN=0→1.8V, CL=1.0μF(ceramic)
3.0
3.0
2.0
2.5
2.0
1.0
2.0
3.0
tr=5μS, Ta=25℃
VIN=0→2.5V, CL=1.0μF(ceramic)
3.0
1.0
IOUT=0.1mA
1mA
30mA
100mA
-2.0
-3.0
0.5
Output Voltage
IOUT=0.1mA
1mA
30mA
100mA
-2.0
0.0
0.5
0.0
-3.0
XC6415(VOUT=5.0V)
8.0
6.0
tr=5μS, Ta=25℃
VIN=0→6.0V, CL=1.0μF(ceramic)
12.0
Input Voltage
4.0
2.0
Output Voltage
3.0
2.0
-2.0
IOUT=0.1mA
1mA
30mA
100mA
1.0
Input Voltage : VIN (V)
5.0
4.0
Output Voltage : VOUT (V)
Input Voltage
Input Voltage : VIN (V)
1.0
-1.0
Time(40uS/div)
(40μs/div)
Time
tr=5μS, Ta=25℃
VIN=0→3.8V, CL=1.0μF(ceramic)
-4.0
1.5
0.0
XC6415(VOUT=2.8V)
0.0
2.0
1.0
Time (40μs/div)
(40uS/div)
6.0
2.5
Output Voltage : VOUT (V)
Output Voltage
Input Voltage
10.0
4.0
8.0
Output
2.0
IOUT=0.1mA
1mA
30mA
100mA
2.0
0.0
-4.0
Time (40μs/div)
Time
(40uS/div)
6.0
4.0
0.0
-2.0
0.0
-6.0
6.0
Output Voltage : VOUT (V)
-1.0
Input Voltage : VIN (V)
1.5
0.0
Output Voltage : VOUT (V)
Input Voltage : VIN (V)
Input Voltage
Time (40μs/div)
Time
(40uS/div)
(9)　Input Transient Response
XC6415(VOUT=0.8V)
XC6415(VOUT=1.5V)
1.00
4.5
0.95
1.8
0.90
0.85
0.8
Output Voltage
0.80
-0.2
IOUT=0.1mA
IOUT=1mA
0.75
Input Voltage : VIN (V)
2.8
-1.2
3.5
1.65
2.5
1.60
IOUT=100mA
Time(100uS/div)
(100μs/div)
Time
1.55
1.5
Output Voltage
1.50
0.5
IOUT=0.1mA
-0.5
IOUT=30mA
-2.2
1.70
Input Voltage
Output Voltage : VOUT (V)
Input Voltage : VIN (V)
Input Voltage
tr=tf=5μS, Ta=25℃
VIN=2.5⇔3.5V, CL=1.0μF(ceramic)
IOUT=1mA
1.45
Output Voltage : VOUT (V)
3.8
tr=tf=5μS, Ta=25℃
VIN=1.8⇔2.8V, CL=1.0μF(ceramic)
IOUT=30mA
0.70
-1.5
IOUT=100mA
1.40
Time (100μs/div)
Time
(100uS/div)
15/23
XC6415 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9)　Input Transient Response (Continued)
XC6415(VOUT=2.8V)
3.00
6.5
2.95
3.8
2.90
2.85
2.8
Output Voltage
2.80
1.8
IOUT=0.1mA
IOUT=1mA
2.75
Input Voltage : VIN (V)
4.8
0.8
6.0
5.15
5.5
5.10
5.05
5.0
Output Voltage
5.00
4.5
IOUT=0.1mA
IOUT=1mA
4.0
IOUT=30mA
IOUT=100mA
-0.2
5.20
Input Voltage
Output Voltage : VOUT (V)
Input Voltage : VIN (V)
Input Voltage
tr=tf=5μS, Ta=25℃
VIN=5.5⇔6.0V, CL=1.0μF(ceramic)
4.95
Output Voltage : VOUT (V)
5.8
XC6415(VOUT=5.0V)
tr=tf=5μS, Ta=25℃
VIN=3.8⇔4.8V, CL=1.0μF(ceramic)
IOUT=30mA
2.70
IOUT=100mA
3.5
Time (100uS/div)
(100μs/div)
Time
4.90
Time
Time(100μs/div)
(100uS/div)
(10)　Load Transient Response
XC6415(VOUT=0.8V)
1.55
250
100
0.70
Output Current
50mA
0.1mA
50
1.50
200
1.45
150
1.40
100
Output Current
0.1mA
0
0
1.30
Time (200μs/div)
Time
(200uS/div)
Time
Time(200μs/div)
(200uS/div)
XC6415(VOUT=2.8V)
XC6415(VOUT=5.0V)
VIN=3.8V, tr=tf=5μS, Ta=25℃
IOUT=0.1→50mA, CIN=CL=1.0μF(ceramic)
50
VIN=6.0V, tr=tf=5μS, Ta=25℃
IOUT=0.1→50mA, CIN=CL=1.0μF(ceramic)
250
250
5.05
2.80
200
5.00
200
2.75
150
4.95
150
2.70
100
4.90
100
2.85
Output Voltage
50mA
0.1mA
2.60
Time (200μs/div)
Time
(200uS/div)
16/23
50
Output Voltage : VOUT (V)
Output Current
2.65
Output Current : IOUT (mA)
Output Voltage
Output Voltage : VOUT (V)
50mA
1.35
Output Current : IOUT (mA)
150
Output Voltage : VOUT (V)
0.75
Output Current : IOUT (mA)
Output Voltage : VOUT (V)
200
0.60
250
Output Voltage
Output Voltage
0.80
0.65
VIN=2.5V, tr=tf=5μS, Ta=25℃
IOUT=0.1→50mA, CIN=CL=1.0μF(ceramic)
Output Current
50mA
4.85
50
0.1mA
0
0
4.80
Time (200μs/div)
Time (200uS/div)
Output Current : IOUT (mA)
0.85
XC6415(VOUT=1.5V)
VIN=1.8V, tr=tf=5μS, Ta=25℃
IOUT=0.1→50mA, CIN=CL=1.0μF(ceramic)
XC6415
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(11)　EN Rising Respose Time
XC6415(VOUT=0.8V)
XC6415(VOUT=1.5V)
tr=5μS, Ta=25℃
VIN=1.8V, VEN=0→1.8V, CIN=CL=1.0μF(ceramic)
3.0
3.0
2.0
2.5
2.0
1.0
2.0
3.0
tr=5μS, Ta=25℃
VIN=2.5V, VEN=0→2.5V, CIN=CL=1.0μF(ceramic)
3.0
1.0
IOUT=0.1mA
1mA
30mA
100mA
-2.0
-3.0
0.5
Output Voltage
1.5
0.0
1.0
-1.0
IOUT=0.1mA
1mA
30mA
100mA
-2.0
0.0
0.0
Time(40uS/div)
(40μs/div)
Time
XC6415(VOUT=2.8V)
XC6415(VOUT=5.0V)
8.0
6.0
6.0
Output Voltage
3.0
2.0
-2.0
IOUT=0.1mA
1mA
30mA
100mA
1.0
Input Voltage : VIN (V)
4.0
2.0
Output Voltage : VOUT (V)
5.0
4.0
-4.0
tr=5μS, Ta=25℃
VIN=6.0V, VEN=0→6.0V, CIN=CL=1.0μF(ceramic)
12.0
EN Input Voltage
EN Input Voltage
0.0
0.5
-3.0
Time
Time(40μs/div)
(40uS/div)
tr=5μS, Ta=25℃
VIN=3.8V, VEN=0→3.8V, CIN=CL=1.0μF(ceramic)
Input Voltage : VIN (V)
2.0
1.0
Output Voltage : VOUT (V)
Output Voltage
2.5
EN Input Voltage
10.0
4.0
8.0
Output Voltage
2.0
IOUT=0.1mA
1mA
30mA
100mA
2.0
0.0
-4.0
Time (40uS/div)
(40μs/div)
Time
6.0
4.0
0.0
-2.0
0.0
-6.0
6.0
Output Voltage : VOUT (V)
-1.0
Input Voltage : VIN (V)
1.5
0.0
Output Voltage : VOUT (V)
Input Voltage : VIN (V)
EN Input Voltage
Time(40uS/div)
(40μs/div)
Time
(12)　Ripple Rejection Rate
XC6415(VOUT=0.8V)
XC6415(VOUT=1.5V)
Ta=25℃
VIN=2.5V+0.5Vp-pAC, CL=1.0μF(ceramic)
Ta=25℃
VIN=1.8V+0.5Vp-pAC, CL=1.0μF(ceramic)
80
Ripple Rejection Rate : RR (dB)
Ripple Rejection Rate : RR (dB)
80
60
40
IOUT=0.1mA
20
IOUT=1mA
IOUT=30mA
IOUT=100mA
0
0.01
0.1
1
10
Ripple Frequency : f (kHz)
100
60
40
20
0
0.01
IOUT=0.1mA
IOUT=1mA
IOUT=30mA
IOUT=100mA
0.1
1
10
Ripple Frequency : f (kHz)
100
17/23
XC6415 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(12)　Ripple Rejection Rate (Continued)
XC6415(VOUT=2.8V)
XC6415(VOUT=5.0V)
Ta=25℃
VIN=3.8V+0.5Vp-pAC, CL=1.0μF(ceramic)
Ta=25℃
VIN=5.75V+0.5Vp-pAC, CL=1.0μF(ceramic)
80
Ripple Rejection Rate : RR (dB)
Ripple Rejection Rate : RR (dB)
80
60
40
IOUT=0.1mA
IOUT=1mA
IOUT=30mA
IOUT=100mA
20
0
0.01
0.1
1
10
Ripple Frequency : f (kHz)
100
(13)　Cross Talk
XC6415(VOUT1=3.3V, VOUT2=2.5V)
VIN=4.3V, tr=tf=5μS, Ta=25℃
IOUT2=0.1→50mA, CIN=CL1=CL2=1.0μF(ceramic)
250
200
3.35
Output Voltage(VR1 : 10mA)
150
3.30
3.25
Output Current
（VR2 : 0.1mA→50mA)
50
3.20
0
3.15
Time
Time (200μs/div)
(200uS/div)
18/23
100
Output Current(VR2) : IOUT
(mA)
Output Voltage(VR1) : VOUT (V)
3.40
60
40
20
0
0.01
IOUT=0.1mA
IOUT=1mA
IOUT=30mA
IOUT=100mA
0.1
1
10
Ripple Frequency : f (kHz)
100
XC6415
Series
■PACKAGING INFORMATION
●USP-6C
MIN0.2
2.8±0.2
1.0～1.3
+0.2
-0.1
1.6
1.1±0.1
●SOT-26
●USP-6C Reference Pattern Layout
●USP-6C Reference Metal Mask Design
2.4
0.45
0.45
1
6
2
5
3
4
0.05
0.05
1.0
19/23
XC6415 Series
■PACKAGING INFORMATION (Continued)
●USPN-6
●USPN-6 Reference Pattern Layout
0.25
0.15
0.2
0.45
0.25
0.45
0.15
●USPN-6 Reference Metal Mask Design
20/23
XC6415
Series
■MARKING RULE
●SOT-26, USP-6C
①Represents product series
MARK
PRODUCT SERIES
1
XC6415xxxxx
②③Represents internal sequential number
01～09，10～99，A0～A9，B0～，B9～，Z9～repeated.
(G，I，J，O，Q，W excluded)
④⑤Represents production lot number
01～09，10，11～99，0A～0Z，1A～9Z，A0～Z9，AA～ZZ repeated.
(G，I，J，O，Q，W excluded)
*No character inversion used.
●USPN-6
①Represents product series
MARK
PRODUCT SERIES
1
XC6415xxxxx
②Represents internal sequential number
0，1～9，A，B～Z repeated.
(G，I，J，O，Q，W excluded)
*Once the sequential number of the mark② is used to Z, a mark① symbol will be added.
③④Represents production lot number
01～09，10，11～99，0A～0Z，1A～9Z，A0～Z9，AA～ZZ repeated.
(G，I，J，O，Q，W excluded)
*No character inversion used.
21/23
XC6415 Series
■PACKAGING INFORMATION (Continued)
●
USP-6C Power Dissipation
Power dissipation data for the USP-6C is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole: 4 x 0.8 Diameter
Evaluation Board (Unit: mm)
2.
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
1000
85
400
Thermal Resistance (℃/W)
100
Power Dissipation Pd（mW）
Pd vs. Ta
1200
1000
800
600
400
200
0
25
22/23
45
65
85
105
Ambient Temperature Ta（℃）
125
XC6415
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics.
Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
23/23