TOREX XC6216D252FR

XC6216/XE6216 Series
ETR0321_012
Voltage Regulators with Stand-by Function - Input Voltage: 28V
■GENERAL DESCRIPTION
XC6216/XE6216 series are positive voltage regulator ICs with 28V of operation voltage. The series consists of a voltage
reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver
transistor.
The output voltage is selectable in 0.1V increments within the range of 2.0V to 12V using laser trimming technologies. With
external resistors, the output voltage range can be expanded from 2.0V to 23V. The output stabilization capacitor (CL) is
also compatible with low ESR ceramic capacitors.
The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate
when the output current reaches current limit level or the junction temperature reaches temperature limit level.
The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power
consumption.
■APPLICATIONS
●Car audio, Car navigation systems
●Note book computers, PDAs
●Home appliances
●Audio visual equipment
(Cameras, VCRs, etc.)
●Cordless phones,
Wireless communication equipment
■FEATURES
Max Output Current
Dropout Voltage
Input Voltage Range
Output Voltage Range
Fixed Output Accuracy
Low Power Consumption
Stand-by Current
High Ripple Rejection
Operating Temperature
Low ESR Capacitor
Built–in Protection
Small Packages
■ TYPICAL APPLICATION CIRCUIT
: More than 150mA (200mA limit)
(VIN=VOUT+3.0V)
: 300mV@IOUT=20mA
: 2.0V~28.0V
: 2.0V~12.0V (0.1V increments)
2.0V~23V with external resistors
:±2%
±1% optional for XC6216 series
: 5μA
: Less than 0.1μA
: 30dB@1kHz
: -40℃~+85℃
: Ceramic Capacitor Compatible
: Current Limit Circuit
Thermal Shutdown Circuit
: SOT-25, SOT-89, SOT-89-5,
USP-6C, SOT-223, TO-252
■ TYPICAL PERFORMANCE
CHARACTERISTICS
●Output Voltage vs. Input Volatage
1/44
XC6216/XE6216 Series
■PIN CONFIGURATION
SOT-25
(TOP VIEW)
SOT-89
(TOP VIEW)
USP-6C
(BOTTOM VIEW)
SOT-89-5
(TOP VIEW)
* The dissipation pad for the USP-6C
package should be solder-plated in
recommended mount pattern and
metal masking so as to enhance
mounting strength and heat release.
If the pad needs to be connected to
other pins, it should be connected to
the VSS (No. 5) pin.
SOT-223
(TOP VIEW)
TO-252
(TOP VIEW)
■PIN ASSIGNMENT
●XC6216B/XE6216B Series
SOT-25*
1
2
3
4
5
-
*The XE6216B in SOT-25 and USP-6C are under development.
PIN NUMBER
SOT-89-5
USP-6C*
5
6
2
5
4
4
3
3
1
1
2
PIN NAME
FUNCTIONS
VIN
VSS
NC
CE
VOUT
NC
Power Input
Ground
No connection
ON/OFF Control
Output
No connection
PIN NAME
FUNCTIONS
VIN
VSS
VOFB
CE
VOUT
NC
Power Input
Ground
Output Voltage Adjustment
ON/OFF Control
Output
No connection
●XC6216C Series
SOT-25
1
2
3
4
5
-
PIN NUMBER
SOT-89-5
5
2
4
3
1
-
●XC6216D/XE6216D Series
SOT-89*
3
2
1
2/43
PIN NUMBER
SOT-223*
3
2
1
USP-6C
6
5
4
3
1
2
*The XE6216D in SOT-89, SOT-223 and TO-252 are under development.
TO-252*
1
2
3
PIN NAME
FUNCTIONS
VIN
VSS
VOUT
Power Input
Ground
Output
XC6216/XE6216
Series
■ PRODUCT CLASSIFICATION
●Ordering Information
XC6216①②③④⑤⑥-⑦
(*1)
DESIGNATOR
DESCRIPTION
①
Type and Options of
Regulators
②③
Output Voltage
④
Output Voltage
Accuracy (*2)
⑤⑥-⑦
Packages
Taping Type (*3)
SYMBOL
B
C
D
20 ~ C0
20
(*1)
(*2)
(*3)
2
1
MR
MR-G
PR
PR
PR-G
ER
FR
FR-G
JR
DESCRIPTION
Fixed output voltage, High Active
Output voltage externally set, High Active
Fixed output voltage, No CE function
For the voltage within 2.0V ~9.9V (0.1V increments);
e.g. 2.5V ⇒ 25
5.0V ⇒ 50
For the voltage above 10.0V (0.1V increments);
e.g. 10.6V ⇒ A6
11.2V ⇒ B2
12.0V ⇒ C0
For C type (output voltage externally set), VOFB=2.0V only
Within ±2% accuracy
Within ±1% accuracy
SOT-25 ( for B and C types only)
SOT-25 ( for B and C types only) (Halogen & Antimony free)
SOT-89-5 (for B and C types only)
SOT-89 (for D type only)
SOT-89 (for D type only) (Halogen & Antimony free)
USP-6C (for B and C types only)
SOT-223 (for D type only)
SOT-223 (for D type only) (Halogen & Antimony free)
TO-252 (for D type only)
The ”-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
For the C type, the accuracy is based on VOFB voltage. The actual output voltage accuracy is depended on the external resistances.
The device orientation is fixed in its embossed tape pocket.
For reverse orientation, please contact your local Torex sales office or representative.
(Standard orientation: ⑤R-⑦, Reverse orientation: ⑤L-⑦)
XE6216①②③④⑤⑥
DESIGNATOR
DESCRIPTION
SYMBOL
①
Type and Options of
Regulators
B
DESCRIPTION
Fixed output voltage, High Active
D
Fixed output voltage, without CE function
②③
Output Voltage
20
For the voltage within 2.0V ~9.9V;
e.g. 2.5V ⇒ 25
5.0V ⇒ 50
For the voltage above 10.0V;
e.g. 10.6V ⇒ A6
11.2V ⇒ B2
12.0V ⇒ C0
For C type (output voltage externally set), VOFB=2.0V only
④
Output Voltage
Accuracy
2
Within ±2% accuracy
Packages
Taping Type (*1)
MR-G
PR
PR-G
PR-G
ER
⑤⑥
20~C0
SOT-25 ( for B type only) *(under development)
SOT-89-5 (for B type only)
SOT-89-5 (for B type only) *(under development)
SOT-89 (for D type only) *(under development)
USP-6C (for B type only) *(under development)
*The XE6216Bxx2M, XE6216Dxx2P, XC6216Bxx2E are under development.
(*1)
The device orientation is fixed in its embossed tape pocket.
For reverse orientation, please contact your local Torex sales office or representative.
(Standard orientation: ⑤R, Reverse orientation: ⑤L)
3/43
XC6216/XE6216 Series
■ BLOCK DIAGRAMS
●XC6216B/XE6216B Series
(SOT-25, SOT-89-5, USP-6C)
*XE6216B in SOT-25 and USP-6C are under development.
●XC6216C Series
(SOT-25, SOT-89-5, USP-6C)
●XC6216D/XE6216D Series
(SOT-89, SOT-223, TO-252)
4/43
*The XE6216D in SOT-89, SOT-223 and TO-252 are under development.
XC6216/XE6216
Series
■ABSOLUTE MAXIMUM RATINGS
●XC6216B Series
PARAMETER
Input Voltage
Output Current
Output Voltage
CE Input Voltage
SYMBOL
VIN
IOUT
VOUT
VCE
SOT-25
Power Dissipation
SOT-89-5
Pd
USP-6C
Operating Temperature Range
Storage Temperature Range
Topr
Tstg
RATINGS
VSS-0.3~30
300 (*1)
VSS-0.3~VIN+0.3
VSS-0.3~30
250
(*2)
600 (PCB mounted)
500
(*2)
1300 (PCB mounted)
100
(*2)
1000 (PCB mounted)
-40~+85
-55~+125
UNITS
V
mA
V
V
mW
(Ta=25℃)
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
*2: The power dissipation figure shown is PCB mounted.
Please refer to pages 37 ~ 40 for details.
●XC6216C Series
PARAMETER
Input Voltage
Output Current
Output Voltage
CE Input Voltage
FB Voltage
SYMBOL
VIN
IOUT
VOUT
VCE
VOFB
SOT-25
Power Dissipation
SOT-89-5
Pd
USP-6C
Operating Temperature Range
Storage Temperature Range
Topr
Tstg
RATINGS
VSS-0.3~30
300 (*1)
VSS-0.3~VIN+0.3
VSS-0.3 ~ 30
VSS-0.3 ~ 30
250
(*2)
600 (PCB mounted)
500
(*2)
1300 (PCB mounted)
100
(*2)
1000 (PCB mounted)
-40~+85
-55~+125
UNITS
V
mA
V
V
V
mW
(Ta=25℃)
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
*2: The power dissipation figure shown is PCB mounted.
Please refer to pages 37 ~ 40 for details.
●XC6216D Series
PARAMETER
Input Voltage
Output Current
Output Voltage
SOT-89
Power Dissipation
SOT-223
TO-252
Operating Temperature Range
Storage Temperature Range
SYMBOL
VIN
IOUT
VOUT
Pd
Topr
Tstg
RATINGS
VSS-0.3~30
300 (*1)
VSS-0.3~VIN+0.3
500
300
1500 (PCB mounted) (*2)
500
-40~+85
-55~+125
UNITS
V
mA
V
mW
(Ta=25℃)
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
*2: The power dissipation figure shown is PCB mounted.
Please refer to pages 37 ~ 40 for details.
5/43
XC6216/XE6216 Series
■ABSOLUTE MAXIMUM RATINGS (Continued)
●XE6216B Series
*The XE6216B in SOT-25 and USP-6C are under development.
PARAMETER
Input Voltage
Output Current
Output Voltage
CE Input Voltage
SYMBOL
RATINGS
UNITS
VIN
IOUT
VOUT
VCE
VSS-0.3～30
300 (*1)
VSS-0.3～VIN+0.3
VSS-0.3～30
250
V
mA
V
V
SOT-25
Power Dissipation
SOT-89-5
600 (PCB mounted) (*2)
Pd
Junction Temperature
Storage Temperature Range
mW
（Ta=25℃）
100
USP-6C
Operating Temperature Range
500
1300 (PCB mounted) (*2)
1000 (PCB mounted) (*2)
Topr
TJ
Tstg
-40～+85
-40～+125
-55～+125
℃
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
*2: The power dissipation figure shown is PCB mounted.
●XE6216D Series
*Under Development
PARAMETER
Input Voltage
Output Current
Output Voltage
CE Input Voltage
Power Dissipation
SOT-89
Operating Temperature Range
Junction Temperature
Storage Temperature Range
*1: IOUT≦Pd / (VIN-VOUT)
6/43
Please refer to pages 37 ~ 40 for details.
SYMBOL
RATINGS
UNITS
VIN
IOUT
VOUT
VCE
VSS-0.3～30
300 (*1)
VSS-0.3～VIN+0.3
VSS-0.3～30
V
mA
V
V
Pd
500
mW
（Ta=25℃）
Topr
TJ
Tstg
-40～+85
-40～+125
-55～+125
℃
℃
℃
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS
Ta = 25℃
●XC6216B Series
PARAMETER
SYMBOL
CONDITIONS
Output Voltage
VOUT(E)
IOUT=20mA, VCE=VIN
VIN=VOUT(T)+3.0V, VCE=VIN
(VOUT(T)≧3.0V)
VIN=VOUT(T)+3.0V, VCE=VIN
(VOUT(T)＜3.0V)
VIN=VOUT(T)+2.0V,
1mA≦IOUT≦50mA, VCE=VIN,
(2.0V≦VOUT(T)≦7.0V)
VIN=VOUT(T)+2.0V,
1mA≦IOUT≦50mA, VCE=VIN,
(7.1V≦VOUT(T)≦12.0V)
IOUT=20mA, VCE=VIN
IOUT=100mA,
VIN = VOUT(T)+3.0V, VCE=VIN
(VOUT(T)<3.0V)
IOUT=100mA, VCE=VIN
(VOUT(T)<3.0V)
VCE=VIN
VCE=VSS
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA, VCE=VIN
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA, VCE=VIN
Maximum Output Current
IOUTMAX
Load Regulation
△VOUT
Dropout Voltage 1
Vdif1
Dropout Voltage 2
Vdif2
Supply Current
Stand-by Current
ISS
Istby
△VOUT /
Line Regulation 1
△VIN・VOUT(T)
△VOUT /
Line Regulation 2
△VIN・VOUT(T)
Input Voltage
VIN
Output Voltage
△VOUT /
Temperature Characteristics △Ta・VOUT(T)
MIN.
TYP.
MAX.
E-0
UNITS
CIRCUIT
V
①
150
-
-
mA
①
100
-
-
mA
①
-
50
90
mV
①
-
110
140
mV
①
E-1
mV
①
E-2
mV
①
1
-
5
0.01
9
0.10
μA
μA
②
②
0.01
0.05
0.10
%/V
①
0.03
0.15
0.30
%/V
①
2.0
-
28.0
V
-
-
±100
-
ppm/℃
①
Ripple Rejection Rate
PSRR
Short Current
CE ”H” Level Voltage
CE ”L” Level Voltage
CE ”H” Level Current
CE ”L” Level Current
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Hysteresis Width
Ishort
VCEH
VCEL
ICEH
ICEL
IOUT=20mA, VCE=VIN
-40℃≦Ta≦85℃
VIN=[VOUT(T)+2.0]V+0.5Vp-pAC
IOUT=20mA, f=1kHz, VCE=VIN
VIN=VOUT(T)+2.0V, VCE=VIN
VIN=28.0V
VIN=28.0V
VIN=VCE=28.0V
VIN=28.0V, VCE=VSS
TTSD
Junction Temperature
-
150
-
℃
①
TTSR
Junction Temperature
-
125
-
℃
①
TTSD-TTSR
Junction Temperature
-
25
-
℃
-
-
30
-
dB
③
1.1
0
-0.1
-0.1
30
-
28.0
0.35
0.1
0.1
mA
V
V
μA
μA
①
①
①
①
①
NOTE:
*1: VOUT(T): Nominal output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: VOUT(T)＜3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input.
VOUT(T)≧3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
7/43
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
Ta = 25℃
●XC6216C Series
PARAMETER
SYMBOL
Output Voltage (Accuracy ±2%)
VOUT(E)
Output Voltage (Accuracy ±1%)
VOUT(E)
Divided Resistor
RFB
Maximum Output Current
IOUTMAX
Load Regulation
△VOUT
Dropout Voltage1
Vdif1
Dropout Voltage2
Vdif2
Supply Current
Stand-by Current
ISS
Istby
Line Regulation1
△VOUT /
△VIN・VOUT(T)
Line Regulation2
△VOUT /
△VIN・VOUT(T)
Input Voltage
VIN
Output Voltage
△VOUT /
Temperature Characteristics △Ta・VOUT(T)
Ripple Rejection Rate
PSRR
Short Current
Ishort
CE ”H” Level Voltage
CE ”L” Level Voltage
CE ”H” Level Current
VCEH
VCEL
ICEH
CE ”L” Level Current
ICEL
Thermal Shutdown Detect
Temperature
Thermal Shutdown
Release Temperature
Hysteresis Width
CONDITIONS
IOUT=20mA, VCE=VIN,
VOFB=VOUT
IOUT=20mA , VCE=VIN ,
VOFB=VOUT
VIN=VOUT=5.0V, VCE=VSS
VOFB=VOUT
MIN.
TYP.
MAX.
UNITS
CIRCUIT
1.96
2.00
2.04
1.98
2.00
2.02
V
①
1.70
4.10
6.30
MΩ
④
100
-
-
mA
①
-
50
90
mV
①
-
450
600
mV
①
-
1900
2600
mV
①
1
-
5
0.01
9
0.10
μA
μA
②
②
-
0.05
0.10
%/V
①
-
0.15
0.30
%/V
①
2.0
-
28.0
V
-
-
±100
-
ppm/℃
①
-
30
-
dB
③
-
30
-
mA
①
1.1
0
-0.1
-
28.0
0.5
0.1
V
V
μA
①
①
①
-0.1
-
0.1
μA
①
VIN=5.0V, VCE=VIN ,
VOFB=VOUT
VIN=4.0V
1mA≦IOUT≦50mA,
VCE=VIN, VOFB=VOUT
IOUT=20mA, VCE=VIN,
VOFB=VOUT
IOUT=100mA, VIN=5.0V,
VCE=VIN, VOFB=VOUT
VCE=VIN, VOFB=VOUT
VCE=VSS, VOFB=VOUT
4.0V≦VIN≦28.0V,
IOUT=5mA, VCE=VIN,
VOFB=VOUT
4.0V≦VIN≦28.0V,
IOUT=13mA, VCE=VIN,
VOFB=VOUT
IOUT=20mA, VCE=VIN,
-40℃≦Ta≦85℃
VIN=4.0V+0.5Vp-pAC,
IOUT=20mA, f=1kHz, VCE=VIN
VOFB=VOUT
VIN=4.0V, VCE=VIN,
VOFB=VOUT
VIN=28.0V, VOFB=VOUT
VIN=28.0V, VOFB=VOUT
VIN=VCE=28.0V, VOFB=VOUT
VIN=28.0V, VCE=VSS
VOFB=VOUT
TTSD
Junction Temperature
-
150
-
℃
①
TTSR
Junction Temperature
-
125
-
℃
①
TTSD-TTSR
Junction Temperature
-
25
-
℃
-
NOTE:
*1: VOUT(T): Nominal output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
8/43
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●XC6216D Series
Ta = 25℃
PARAMETER
SYMBOL
CONDITIONS
Output Voltage
VOUT(E)
IOUT=20mA
Maximum Output Current
IOUTMAX
Load Regulation
△VOUT
Dropout Voltage1
Vdif1
Dropout Voltage2
Vdif2
ISS
△VOUT /
Line Regulation1
△VIN・VOUT(T)
△VOUT /
Line Regulation2
△VIN・VOUT(T)
Input Voltage
VIN
Output Voltage
△VOUT /
Temperature Characteristics △Ta・VOUT(T)
MIN.
TYP.
MAX.
E-0
UNITS
CIRCUIT
V
①
VIN=VOUT(T)+3.0V,
(VOUT(T)≧3.0V)
150
-
-
mA
①
VIN=VOUT(T)+3.0V,
(VOUT(T)＜3.0V)
100
-
-
mA
①
-
50
90
mV
①
-
110
140
mV
①
E-1
mV
①
E-2
mV
①
VIN=VOUT(T)+2.0V
1mA≦IOUT≦50mA
( 2.0V≦VOUT(T)≦7.0V )
VIN=VOUT(T)+2.0V
1mA≦IOUT≦50mA
( 7.1≦VOUT(T)≦12.0V )
IOUT=20mA
IOUT=100mA, VIN=VOUT(T)+3.0V
(VOUT(T)＜3.0V)
IOUT=100mA,
(VOUT(T)≧3.0V)
Supply Current
1
5
9
μA
②
-
0.05
0.10
%/V
①
-
0.15
0.30
%/V
①
2.0
-
28.0
V
-
-
±100
-
ppm/℃
①
-
30
-
dB
③
-
30
-
mA
①
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA
Ripple Rejection Rate
PSRR
Short Current
Ishort
IOUT=20mA, VCE=VIN
-40℃≦Ta≦85℃
VIN=[VOUT(T)+2.0]V+0.5Vp-pAC
IOUT=20mA, f=1kHz
VIN=VOUT(T)+2.0V
TTSD
Junction Temperature
-
150
-
℃
-
TTSR
Junction Temperature
-
125
-
℃
-
TTSD-TTSR
Junction Temperature
-
25
-
℃
-
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Hysteresis Width
NOTE:
*1: VOUT(T): Nominal output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: VOUT(T)＜3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input.
VOUT(T)≧3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
9/43
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart
PARAMETER
NOMINAL
OUTPUT
VOLTAGE
VOUT(T)
(V)
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
10/43
E-0
OUTPUT VOLTAGE
(V)
2% ACCURACY
OUTPUT VOLTAGE
(V)
1% ACCURACY
VOUT
MIN.
1.960
2.058
2.156
2.254
2.352
2.450
2.548
2.646
2.744
2.842
2.940
3.038
3.136
3.234
3.332
3.430
3.528
3.626
3.724
3.822
3.920
4.018
4.116
4.214
4.312
4.410
4.508
4.606
4.704
4.802
E-1
E-2
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
VOUT
MAX.
2.040
2.142
2.244
2.346
2.448
2.550
2.652
2.754
2.856
2.958
3.060
3.162
3.264
3.366
3.468
3.570
3.672
3.774
3.876
3.978
4.080
4.182
4.284
4.386
4.488
4.590
4.692
4.794
4.896
4.998
MIN.
1.980
2.079
2.178
2.277
2.376
2.475
2.574
2.673
2.772
2.871
2.970
3.069
3.168
3.267
3.366
3.465
3.564
3.663
3.762
3.861
3.960
4.059
4.158
4.257
4.356
4.455
4.554
4.653
4.752
4.851
Vdif1
MAX.
2.020
2.121
2.222
2.323
2.424
2.525
2.626
2.727
2.828
2.929
3.030
3.131
3.232
3.333
3.434
3.535
3.636
3.737
3.838
3.939
4.040
4.141
4.242
4.343
4.444
4.545
4.646
4.747
4.848
4.949
TYP.
450
450
390
390
390
310
310
310
310
310
260
260
260
260
260
260
260
260
260
260
220
220
220
220
220
220
220
220
220
220
Vdif2
MAX.
600
600
520
520
520
450
450
450
450
450
360
360
360
360
360
360
360
360
360
360
320
320
320
320
320
320
320
320
320
320
TYP.
1900
1900
1700
1700
1700
1500
1500
1500
1500
1500
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
MAX.
2600
2600
2200
2200
2200
1900
1900
1900
1900
1900
1700
1700
1700
1700
1700
1700
1700
1700
1700
1700
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart (Continued)
PARAMETER
NOMINAL
OUTPUT
VOLTAGE
VOUT(T)
(V)
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8.0
E-0
OUTPUT VOLTAGE
(V)
2% ACCURACY
OUTPUT VOLTAGE
(V)
1% ACCURACY
VOUT
MIN.
4.900
4.998
5.096
5.194
5.292
5.390
5.488
5.586
5.684
5.782
5.880
5.978
6.076
6.174
6.272
6.370
6.468
6.566
6.664
6.762
6.860
6.958
7.056
7.154
7.252
7.350
7.448
7.546
7.644
7.742
7.840
E-1
E-2
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
VOUT
MAX.
5.100
5.202
5.304
5.406
5.508
5.610
5.712
5.814
5.916
6.018
6.120
6.222
6.324
6.426
6.528
6.630
6.732
6.834
6.936
7.038
7.140
7.242
7.344
7.446
7.548
7.650
7.752
7.854
7.956
8.058
8.160
MIN.
4.950
5.049
5.148
5.247
5.346
5.445
5.544
5.643
5.742
5.841
5.940
6.039
6.138
6.237
6.336
6.435
6.534
6.633
6.732
6.831
6.930
7.029
7.128
7.227
7.326
7.425
7.524
7.623
7.722
7.821
7.920
Vdif1
MAX.
5.050
5.151
5.252
5.353
5.454
5.555
5.656
5.757
5.916
5.959
6.060
6.161
6.262
6.363
6.464
6.565
6.666
6.767
6.868
6.969
7.070
7.171
7.272
7.373
7.474
7.575
7.676
7.777
7.878
7.979
8.080
TYP.
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
Vdif2
MAX.
280
280
280
280
280
280
280
280
280
280
280
280
280
280
280
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
TYP.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
MAX.
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
11/43
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart (Continued)
PARAMETER
NOMINAL
OUTPUT
VOLTAGE
VOUT(T)
(V)
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10.0
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
12.0
12/43
E-0
OUTPUT VOLTAGE
(V)
2% ACCURACY
OUTPUT VOLTAGE
(V)
1% ACCURACY
VOUT
MIN.
7.938
8.036
8.134
8.232
8.330
8.428
8.526
8.624
8.722
8.820
8.918
9.016
9.114
9.212
9.310
9.408
9.506
9.604
9.702
9.800
9.898
9.996
10.094
10.192
10.290
10.388
10.486
10.584
10.682
10.780
10.878
10.976
11.074
11.172
11.270
11.368
11.466
11.564
11.662
11.760
E-1
E-2
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
VOUT
MAX.
8.262
8.364
8.466
8.568
8.670
8.772
8.874
8.976
9.078
9.180
9.282
9.384
9.486
9.588
9.690
9.792
9.894
9.996
10.098
10.200
10.302
10.404
10.506
10.608
10.710
10.812
10.914
11.016
11.118
11.220
11.322
11.424
11.526
11.628
11.730
11.832
11.934
12.036
12.138
12.240
MIN.
8.019
8.118
8.217
8.316
8.415
8.514
8.613
8.712
8.811
8.910
9.009
9.108
9.207
9.306
9.405
9.504
9.603
9.702
9.801
9.900
9.999
10.098
10.197
10.296
10.395
10.494
10.593
10.692
10.791
10.890
10.989
11.088
11.187
11.286
11.385
11.484
11.583
11.682
11.781
11.880
Vdif1
MAX.
8.181
8.282
8.383
8.484
8.585
8.686
8.787
8.888
8.989
9.090
9.191
9.292
9.393
9.494
9.595
9.696
9.797
9.898
9.999
10.100
10.201
10.302
10.403
10.504
10.605
10.706
10.807
10.908
11.009
11.110
11.211
11.312
11.413
11.514
11.615
11.716
11.817
11.918
12.019
12.120
TYP.
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
Vdif2
MAX.
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
TYP.
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
MAX.
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●XE6216B Series
PARAMETER
SYMBOL
CONDITIONS
Output Voltage
VOUT(E)
IOUT＝20mA , VCE=VIN
Maximum Output
Current(*)
IOUTMAX
Load Regulation(*)
ΔVOUT
Dropout Voltage1
Vdif1
Dropout Voltage2(*)
VIN＝VOUT(T)+3.0V, VCE=VIN
(VOUT(T)≧3.0Ｖ）
VIN = VOUT(T)+3.0V, VCE=VIN
(VOUT(T)＜3.0Ｖ）
VIN＝VOUT(T)+2.0V, VCE=VIN
1mA≦IOUT≦50mA
Ta=25℃
MIN.
TYP.
Ta=-40℃～85℃
MAX.
MIN.
E-0-1
TYP.
MAX.
E-0-2
UNITS CIRCUIT
V
①
-
-
-
150
-
-
mA
①
-
-
-
100
-
-
mA
①
E-1-1
E-1-2
mV
①
IOUT＝20mA, VCE=VIN
E-2-1
E-2-2
mV
①
Vdif2
IOUT＝100mA, VCE=VIN
E-3-1
E-3-2
mV
①
Supply Current
ISS
VCE=VIN
1
5
9
0.5
5
10
μA
②
Stand-by Current
Istby
VCE=VSS
-
0.01
0.1
-
0.01
4
μA
②
ΔVOUT/
ΔVIN*VOUT(T)
ΔVOUT/
ΔVIN*VOUT(T)
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA, VCE=VIN
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA, VCE=VIN
-
0.05
0.10
-
0.05
0.12
%/V
①
-
0.15
0.30
-
0.15
0.32
%/V
①
28.0
2.0
28.0
V
Line Regulation1(*)
Line Regulation2(*)
Input Voltage
VIN
2.0
Output Voltage
Temperature
Characteristics
ΔVOUT/
ΔTa*VOUT(T)
IOUT＝20mA, VCE=VIN
-40℃≦Ta≦85℃
-
±100
±350
-
-
-
ppm/℃
①
Ripple Rejection Rate
PSRR
VIN=[VOUT(T)+2.0]V+0.5Vp-pAC,
IOUT＝20mA, ｆ＝1kHz ,
VCE=VIN
-
30
-
-
30
-
dB
③
Short Current
Ishort
VIN=VOUT(T)+2.0V, VCE=VIN
-
30
-
-
30
-
mA
①
CE "H" Level Voltage
VCEH
VIN=28.0V
-
-
-
1.1
-
28.0
V
①
CE "L" Level Voltage
VCEL
VIN=28.0V
-
-
-
0
-
0.35
V
①
CE "H" Level Current
ICEH
VIN=VCE=28.0V
-0.1
-
0.1
-0.1
-
0.7
μA
②
CE "L" Level Current
ICEL
VIN=28.0V, VCE=VSS
-0.1
-
0.1
-0.2
-
-0.2
μA
②
Thermal Shutdown
Detect Temperature
TTSD
Junction Temperature
-
150
-
-
150
-
℃
①
Thermal Shutdown
Release Temperature
TTSR
Junction Temperature
-
125
-
-
125
-
℃
①
Hysteresis Width
TTSD - TTSR
Junction Temperature
-
25
-
-
25
-
℃
-
NOTE:
*1: VOUT(T): Nominal output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: VOUT(T)＜3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input.
VOUT(T)≧3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
（※）Junction temperature range is Tj=-40～125℃ for this table.
13/43
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●XE6216D Series
Under Development
Ta=25℃
PARAMETER
SYMBOL
CONDITIONS
Output Voltage
VOUT(E)
IOUT＝20mA
Maximum Output
Current(*)
I OUTMAX
VIN＝VOUT(T)+3.0V
(VOUT(T)≧3.0Ｖ）
VIN = VOUT(T)+3.0V
(VOUT(T)＜3.0Ｖ）
Load Regulation(*)
ΔVOUT
VIN＝VOUT(T)+2.0V
1mA≦IOUT≦50mA
E-1-1
Dropout Voltage1
Vdif1
IOUT＝20mA
Dropout Voltage2(*)
Vdif2
IOUT＝100mA
Supply Current
ISS
Line Regulation1(*)
ΔVOUT/
ΔVIN*VOUT(T)
Line Regulation2(*)
ΔVOUT/
ΔVIN*VOUT(T)
Input Voltage
VIN
Output Voltage
Temperature
Characteristics
ΔVOUT/
ΔTa*VOUT(T)
IOUT＝20mA
-40℃≦Ta≦85℃
-
Ripple Rejection Rate
PSRR
VIN=[VOUT(T)+2.0]V+0.5Vp-pAC,
IOUT＝20mA, ｆ＝1kHz
Short Current
Ishort
Thermal Shutdown
Detect Temperature
MIN.
TYP.
Ta=-40℃～85℃
MAX.
MIN.
E-0-1
TYP.
MAX.
E-0-2
UNITS CIRCUIT
V
①
-
-
-
150
-
-
mA
①
-
-
-
100
-
-
mA
①
E-1-2
mV
①
E-2-1
E-2-2
mV
①
E-3-1
E-3-2
mV
①
1
5
9
0.5
5
10
μA
②
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA
-
0.05
0.10
-
0.05
0.12
%/V
①
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA
-
0.15
0.30
-
0.15
0.32
%/V
①
28.0
2.0
28.0
V
±100
±350
-
-
-
ppm/℃
①
-
30
-
-
30
-
dB
③
VIN=VOUT(T)+2.0V
-
30
-
-
30
-
mA
①
TTSD
Junction Temperature
-
150
-
-
150
-
℃
①
Thermal Shutdown
Release Temperature
TTSR
Junction Temperature
-
125
-
-
125
-
℃
①
Hysteresis Width
TTSD - TTSR
Junction Temperature
-
25
-
-
25
-
℃
-
2.0
NOTE:
*1: VOUT(T): Nominal output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: VOUT(T)＜3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input.
VOUT(T)≧3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
（※）
14/43
Junction temperature range is Tj=-40～125℃ for this table.
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart 1 (XE6216 Series)
SYMBOL
E-0-2
SYMBOL
E-0-1
E-0-2
-40～85℃
Temperature
/ Ta
25℃
-40～85℃
E-0-1
Temperature
/ Ta
25℃
PARAMETER
PARAMETER
NOMINAL
OUTPUT
VOLTAGE
VOUT(T)
(V)
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V)
Accuracy +3% , -3.5%
Accuracy ±2%
NOMINAL
OUTPUT
OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V)
Accuracy +3% , -3.5%
Accuracy ±2%
VOLTAGE
VOUT
MIN.
1.960
2.058
2.156
2.254
2.352
2.450
2.548
2.646
2.744
2.842
2.940
3.038
3.136
3.234
3.332
3.430
3.528
3.626
3.724
3.822
3.920
4.018
4.116
4.214
4.312
4.410
4.508
4.606
4.704
4.802
VOUT
MAX.
2.040
2.142
2.244
2.346
2.448
2.550
2.652
2.754
2.856
2.958
3.060
3.162
3.264
3.366
3.468
3.570
3.672
3.774
3.876
3.978
4.080
4.182
4.284
4.386
4.488
4.590
4.692
4.794
4.896
4.998
MIN.
1.930
2.027
2.123
2.220
2.316
2.413
2.509
2.606
2.702
2.799
2.895
2.992
3.088
3.185
3.281
3.378
3.474
3.571
3.667
3.764
3.860
3.957
4.053
4.150
4.246
4.342
4.439
4.535
4.632
4.728
MAX.
2.060
2.163
2.266
2.369
2.472
2.575
2.678
2.781
2.884
2.987
3.090
3.193
3.296
3.399
3.502
3.605
3.708
3.811
3.914
4.017
4.120
4.223
4.326
4.429
4.532
4.635
4.738
4.841
4.944
5.047
VOUT(T)
(V)
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
VOUT
MIN.
4.900
4.998
5.096
5.194
5.292
5.390
5.488
5.586
5.684
5.782
5.880
5.978
6.076
6.174
6.272
6.370
6.468
6.566
6.664
6.762
6.860
6.958
7.056
7.154
7.252
7.350
7.448
7.546
7.644
7.742
VOUT
MAX.
5.100
5.202
5.304
5.406
5.508
5.610
5.712
5.814
5.916
6.018
6.120
6.222
6.324
6.426
6.528
6.630
6.732
6.834
6.936
7.038
7.140
7.242
7.344
7.446
7.548
7.650
7.752
7.854
7.956
8.058
MIN.
4.825
4.921
5.018
5.114
5.211
5.307
5.404
5.500
5.597
5.693
5.790
5.886
5.983
6.079
6.176
6.272
6.369
6.465
6.562
6.658
6.755
6.851
6.948
7.044
7.141
7.237
7.334
7.430
7.527
7.623
MAX.
5.150
5.253
5.356
5.459
5.562
5.665
5.768
5.871
5.974
6.077
6.180
6.283
6.386
6.489
6.592
6.695
6.798
6.901
7.004
7.107
7.210
7.313
7.416
7.519
7.622
7.725
7.828
7.931
8.034
8.137
15/43
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart 2 (XE6216 Series)
SYMBOL
E-0-1
E-0-2
Temperature
/Ta
25℃
-40～85℃
PARAMETER
NOMINAL
OUTPUT
OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V)
Accuracy +3% , -3.5%
Accuracy ±2%
VOLTAGE
VOUT(T)
(V)
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10.0
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
VOUT
MIN.
MAX.
7.840
8.160
7.938
8.262
8.036
8.364
8.134
8.466
8.232
8.568
8.330
8.670
8.428
8.772
8.526
8.874
8.624
8.976
8.722
9.078
8.820
9.180
8.918
9.282
9.016
9.384
9.114
9.486
9.212
9.588
9.310
9.690
9.408
9.792
9.506
9.894
9.604
9.996
9.702
10.098
9.800
10.200
9.898
10.302
9.996
10.404
10.094
10.506
10.192
10.608
10.290
10.710
10.388
10.812
10.486
10.914
10.584
11.016
10.682
11.118
10.780
11.220
VOUT
MIN.
MAX.
7.720
8.240
7.816
8.343
7.913
8.446
8.009
8.549
8.106
8.652
8.202
8.755
8.299
8.858
8.395
8.961
8.492
9.064
8.588
9.167
8.685
9.270
8.781
9.373
8.878
9.476
8.974
9.579
9.071
9.682
9.167
9.785
9.264
9.888
9.360
9.991
9.457
10.094
9.553
10.197
9.650
10.300
9.747
10.403
9.843
10.506
9.940
10.609
10.036
10.712
10.133
10.815
10.229
10.918
10.326
11.021
10.422
11.124
10.519
11.227
10.615
11.330
11.1
10.878
11.322
10.712
11.433
11.2
11.3
10.976
11.074
11.424
11.526
10.808
10.905
11.536
11.639
11.4
11.172
11.628
11.001
11.742
11.5
11.6
11.7
11.8
11.9
12.0
11.270
11.368
11.466
11.564
11.662
11.760
11.730
11.832
11.934
12.036
12.138
12.240
11.098
11.194
11.291
11.387
11.484
11.580
11.845
11.948
12.051
12.154
12.257
12.360
16/43
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart 3 (XE6216 Series)
SYMBOL
E-1-1
E-1-2
E-2-1
E-2-2
E-3-1
E-3-2
Temperature
/Ta
25℃
-40～85℃
25℃
-40～85℃
25℃
-40～85℃
LOAD
REGULATION
(mV)
LOAD
REGULATION
(mV)
PARAMETER
NOMINAL
OUTPUT
DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 2 DROPOUT VOLTAGE 2
(mV)
(mV)
(mV)
(mV)
IOUT=20mA
IOUT=20mA
IOUT=100mA
IOUT=100mA
VOLTAGE
VOUT(T)
(V)
ΔVOUT
TYP.
MAX.
ΔVOUT
TYP.
MAX.
2.0
2.1
Vdif1
Vdif1
Vdif2
Vdif2
TYP.
MAX.
TYP.
MAX.
TYP.
MAX.
TYP.
MAX.
450
600
450
735
1900
2600
1900
3060
390
520
390
675
1700
2200
1700
2760
310
450
310
620
1500
1900
1500
2620
260
360
260
520
1300
1700
1300
2370
220
320
220
410
1100
1500
1100
2045
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
50
90
50
103
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
17/43
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart 4 (XE6216 Series)
SYMBOL
E-1-1
E-1-2
E-2-1
E-2-2
E-3-1
E-3-2
Temperature
/ Ta
25℃
-40～85℃
25℃
-40～85℃
25℃
-40～85℃
LOAD
REGULATION
(mV)
LOAD
REGULATION
(mV)
PARAMETER
NOMINAL
OUTPUT
DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 2 DROPOUT VOLTAGE 2
(mV)
(mV)
(mV)
(mV)
IOUT=20mA
IOUT=20mA
IOUT=100mA
IOUT=100mA
VOLTAGE
VOUT(T)
(V)
ΔVOUT
TYP.
MAX.
ΔVOUT
TYP.
MAX.
Vdif1
Vdif1
Vdif2
Vdif2
TYP.
MAX.
TYP.
MAX.
TYP.
MAX.
TYP.
MAX.
190
280
190
380
1000
1300
1000
1730
170
230
170
340
800
1150
800
1580
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
50
90
50
103
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8.0
18/43
110
140
110
150
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart 5 (XE6216 Series)
SYMBOL
Temperature
/ Ta
E-1-1
E-1-2
E-2-1
E-2-2
E-3-1
E-3-2
25℃
-40～85℃
25℃
-40～85℃
25℃
-40～85℃
LOAD
REGULATION
(mV)
LOAD
REGULATION
(mV)
PARAMETER
NOMINAL
OUTPUT
DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 2 DROPOUT VOLTAGE 2
(mV)
(mV)
(mV)
(mV)
IOUT=20mA
IOUT=20mA
IOUT=100mA
IOUT=100mA
VOLTAGE
VOUT(T)
(V)
ΔVOUT
TYP.
MAX.
ΔVOUT
TYP.
MAX.
Vdif1
Vdif1
Vdif2
Vdif2
TYP.
MAX.
TYP.
MAX.
TYP.
MAX.
TYP.
MAX
130
190
130
320
700
950
700
1460
120
160
120
285
650
850
650
1160
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10.0
10.1
110
140
110
150
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
12.0
19/43
XC6216/XE6216 Series
■ OPERATIONAL EXPLANATION
<Output Voltage Control>
The voltage divided by resistors R11 & R12 is compared with the internal reference voltage by the error amplifier. The
P-channel MOSFET which is connected to the VOUT pin is then driven by the subsequent output signal. The output
voltage at the VOUT pin is controlled and stabilized by a system of negative feedback. The current limit circuit and short
protect circuit operate in relation to the level of output current and heat dissipation. Further, the IC’s internal circuitry
can be shutdown via the CE pin’s signal.
<Short-Circuit Protection>
The XC6216/XE6216 series includes a current fold-back circuit as a short circuit protection. When the load current reaches
the current limit level, the current fold-back circuit operates and output voltage drops. The output voltage drops further and
output current decreases. When the output pin is shorted, a current of about 30mA flows.
<CE Pin>
The IC’s internal circuitry can be shutdown via the signal from the CE pin with the XC6216/XE6216 series. In shutdown
mode, output at the VOUT pin will be pulled down by R11 and R12 to the VSS level. Note that as the XC6216/XE6216 series
is ‘High Active/No pull down’, operations will become unstable with the CE pin open. We suggest that you use this IC with
either a VIN voltage or a VSS voltage input at the CE pin. If this IC is used with the correct specifications for the CE pin, the
operational logic is fixed and the IC will operate normally. However, supply current may increase as a result of through
current in the IC’s internal circuitry if a medium voltage is applied.
<Thermal Shutdown>
When the junction temperature of the built-in driver transistor reaches the temperature limit level (150℃ TYP.), the thermal
shutdown circuit operates and the driver transistor will be set to OFF. The IC resumes its operation when the thermal
shutdown function is released and the IC’s operation is automatically restored because the junction temperature drops to the
level of the thermal shutdown release voltage.
<Minimum Operating Voltage>
For the stable operation of the IC, over 2.0V of input voltage is necessary. The output voltage may not be generated
normally if the input voltage is less than 2.0V.
20/43
XC6216/XE6216
Series
■ NOTES ON USE
1． Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded.
2． Where wiring impedance is high, operations may become unstable due to the noise and/or phase lag depending on output
current. Please strengthen VIN and VSS wiring in particular.
3. Phase compensation inside the IC is performed in the XC6216/XE6216 series. Therefore, an abnormal oscillation does not
occur even if there is no output capacitor CL. An input capacitor CIN around 0.1uF~1.0uF between the VIN pin and the
VSS pin is required for input stability. Also, the output voltage fluctuation such as under shoot or over shoot, which occurs
because of the load change can be controlled by placing the output capacitor CL around 0.1uF~1.0uF between the VOUT
pin and VSS pin. The input capacitor (CIN) and the output capacitor (CL) should be placed to the IC as close as possible
with a shorter wiring.
4. Notes on Setting Output Voltage Externally (C type) Ta=25℃
The output voltage can be set externally by the following equation:
I21=IFB+I22
………………………………………………………………………
I22=2.0V/R22
………………………………………………………………………
I21=IFB+2.0V/R22
………………………………………………………………………
If the equation (3) is assigned to the equation (2), the equation becomes as below:
VOUT=2.0V+R21・I21
………………………………………………………………………
For this, the following equation can be used for setting output voltage externally:
VOUT=2.0V+R21・I21
………………………………………………………………………
And the equation (4) will be;
VOUT=2.0V+R21 ・(IFB+2.0V/R22)
………………………………………………………………………
=2.0V・(R21 + R22) / R22 + R21・IFB
………………………………………………………………………
The second term of the equation (6), R21・IFB, is the cause of the output accuracy error.
The IFB can be calculated by the following equation:
IFB=2.0V / RFB
………………………………………………………………………
The cause of the output accuracy error, R21・IFB can be calculated by the equation below;
R21･IFB=R21・2.0V/ RFB
=2.0V・R21 / RFB
………………………………………………………………………
Accordingly, if R21<< RFB, the output voltage error becomes minute.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
●Setting Resistance-Dependant of XC6216 Series’ Output Voltage
21/43
XC6216/XE6216 Series
■ TEST CIRCUITS
Circuit ①
●XC6216B/XE6216B Series
●XC6216C/XE6216C Series
●XC6216D/XE6216D Series
Circuit ②
●XC6216B/XE6216B Series
●XC6216C/XE6216C Series
●XC6216D/XE6216D Series
Circuit ③
●XC6216B/XE6216B Series
●XC6216D/XE6216D Series
Circuit ④
●XC6216C/XE6216C Series
22/43
●XC6216C/XE6216C Series
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
XC6216B/C/D 202
VIN=VCE=5.0V, Ta=25℃, C IN=C L=1.0μF (ceramic)
2.0
1.5
1.0
Ta=-40℃
0.5
Ta=25℃
Ta=25℃, C IN=C L=1.0μF (ceramic)
2.5
Output Voltage: V OUT (V)
2.5
Output Voltage: V OUT (V)
XC6216B/C/D 202
2.0
1.5
1.0
VIN=3V
VIN=4V
0.5
VIN=5V
Ta=85℃
0.0
0.0
0
50
100
150
200
250
300
0
50
Output Current: IOUT (mA)
XC6216B/D 332
250
300
3.5
OutputVoltage:
Voltage:VOUT
V OUT (V)
(V)
Output
Output
Voltage
: VOUT
Output
Voltage:
V OUT(V)
(V)
200
Ta=25℃, C IN=C L=1.0μF (ceramic)
4.0
3.5
3.0
2.5
2.0
1.5
1.0
Ta=-40℃
Ta=25℃
0.5
0
50
100
150
200
3.0
2.5
2.0
1.5
VIN=4.3V
1.0
VIN=5.3V
0.5
Ta=85℃
0.0
VIN=6.3V
0.0
250
300
0
50
OutputCurrent
Current:: IOUT
IOUT (mA)
Output
XC6216B/D 502
300
4.0
3.0
2.0
Ta=-40℃
Ta=25℃
Ta=25℃, C IN=C L=1.0μF (ceramic)
6.0
Output
Voltage:
V OUT(V)
(V)
Output
Voltage
: VOUT
5.0
1.0
100
150
200
250
Output Current: IIOUT
OUT (mA)
(mA)
XC6216B/D 502
VIN=VCE=8.0V, Ta=25℃, C IN=C L=1.0μF (ceramic)
6.0
Output
OutputVoltage
Voltage:
: VOUT
V OUT (V)
150
XC6216B/D 332
VIN=VCE=6.3V, Ta=25℃, C IN=C L=1.0μF (ceramic)
4.0
100
Output Currrent: IOUT (mA)
5.0
4.0
3.0
2.0
VIN=6V
1.0
VIN=7V
Ta=85℃
VIN=8V
0.0
0.0
0
50
100
150
200
250
Output
(mA)
Output Current
Current:: IIOUT
OUT (mA)
300
0
50
100
150
200
250
OutputCurrent
Current:
IOUT (mA)
Output
: IOUT
300
23/43
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(1) Output Voltage vs. Output Current (Continued)
XC6216B/D C02
XC6216B/D C02
VIN=VCE=15.0V, Ta=25℃, C IN=C L=1.0μF (ceramic)
14
12
12
Output
(V)
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
: VOUT
OutputVoltage
Voltage:
V OUT (V)
Ta=25℃, C IN=C L=1.0μF (ceramic)
14
10
8
6
4
Ta=-40℃
10
Ta=25℃
2
8
6
VIN=13V
4
VIN=14V
2
VIN=15V
Ta=85℃
0
0
0
50
100
150
200
250
OutputCurrent
Current:: IOUT
IOUT (mA)
Output
300
0
50
100
150
200
250
Current:: IOUT
Output Current
IOUT(mA)
(mA)
300
(2) Output Voltage vs. Input Voltage
XC6216B/C/D 202
XC6216B/C/D 202
Ta=25℃, C IN=C L=1.0μF (ceramic)
2.1
2.0
OutputVoltage
Voltage:
V OUT (V)
Output
: VOUT
2.0
Output
OutputVoltage
Voltage:
: VOUT
V OUT (V)
Ta=25℃, C IN=C L=1.0μF (ceramic)
2.1
1.9
1.8
1.7
IOUT=1mA
1.6
IOUT=10mA
1.9
1.8
1.7
IOUT=1mA
IOUT=10mA
1.6
IOUT=30mA
IOUT=30mA
1.5
1.5
1.5
2
2.5
3
Input
Input
Voltage:
(V)
ININ(V)
InputVoltage:
Voltage:VV
VIN
(V)
3.5
4
4
8
12
16
20
XC6216B/D 332
28
XC6216B/D 332
Ta=25℃, CIN=CL=1.0uF(ceramic)
Ta=25℃, CIN=CL=1.0uF(ceramic)
3.4
3.4
3.3
3.3
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
24
Input
IN (V)
InputVoltage:
Voltage V
: VIN
(V)
3.2
3.1
3
IOUT=1mA
2.9
3.2
3.1
3
IOUT=1mA
IOUT=10mA
2.9
IOUT=10mA
IOUT=30mA
IOUT=30mA
2.8
2.8
2.8
3.3
3.8
4.3
Input Voltage : VIN (V)
24/43
4.8
5.3
4
8
12
16
20
Input Voltage : VIN (V)
24
28
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage (Continued)
XC6216B/D 502
XC6216B/D 502
Ta=25℃, C IN =C L=1.0μF (ceramic)
5.2
5.0
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
(V)
5.0
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
(V)
Ta=25℃, C IN =C L=1.0μF (ceramic)
5.2
4.8
4.6
4.4
IOUT=1mA
IOUT=10mA
4.2
4.8
4.6
4.4
IOUT=1mA
IOUT=10mA
4.2
IOUT=30mA
IOUT=30mA
4.0
4.0
4
4.5
5
5.5
6
6.5
8
12
InputVoltage
Voltage:
V IN(V)
(V)
Input
: VIN
16
XC6216B/D C02
OutputVoltage
Voltage:: V
OUT (V)
Output
VOUT
(V)
OutputVoltage
Voltage:
V OUT (V)
(V)
Output
: VOUT
28
Ta=25℃, C IN=C L=1.0μF (ceramic)
12.5
12.5
12.0
11.5
11.0
IOUT=1mA
IOUT=10mA
10.5
24
XC6216B/D C02
Ta=25℃, C IN=C L=1.0μF (ceramic)
13.0
20
InputVoltage
Voltage:: VIN
V IN (V)
(V)
Input
12.0
11.5
11.0
IOUT=1mA
IOUT=10mA
10.5
IOUT=30mA
IOUT=30mA
10.0
10.0
10
11
12
13
InputVoltage
Voltage:: VIN
V IN (V)
(V)
Input
14
14
16
18
20
22
24
26
28
InputVoltage:
Voltage V
: VIN
(V)
Input
IN (V)
(3) Dropout Voltage vs. Output Current
XC6216B/C/D 202
C IN=C L=1.0uF (ceramic)
Ta=-40℃
2.5
Ta=25℃
Ta=85℃
2.0
1.5
1.0
0.5
0.0
0
25
50
75
100
OutputCurrent
Current:: IOUT
IOUT (V)
Output
(mA)
125
150
C IN=C L=1.0uF (ceramic)
3.0
Dropout
Voltage :Voltage
V DIF (V)
Input/Output
Difference
: VDIF (V)
3.0
Input/Output
Dropout
Difference
VoltageVoltage
: V DIF (V)
: VDIF (V)
XC6216B/D 332
Ta=-40℃
2.5
Ta=25℃
Ta=85℃
2.0
1.5
1.0
0.5
0.0
0
25
50
75
100
125
Output
Current
: IOUT
Output
Current:
IOUT(mA)
(V)
150
25/43
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current
XC6216B/D 502
CIN=CL=1.0uF(ceramic)
Ta=-40℃
2.5
C IN=C L=1.0uF (ceramic)
3.0
Input/Output
Dropout
Difference
VoltageVoltage
: V DIF (V)
: VDIF (V)
3.0
Dropout
Voltage:Voltage
V DIF (V)
Input/Output
Difference
: VDIF (V)
XC6216B/D C02
Ta=25℃
Ta=85℃
2.0
1.5
1.0
0.5
Ta=-40℃
2.5
Ta=25℃
Ta=85℃
2.0
1.5
1.0
0.5
0.0
0.0
0
25
50
75
100
125
Output
(mA)
OutputCurrent
Current:: IOUT
IOUT (V)
0
150
25
50
75
100
125
Output
(mA)
Output Current
Current:: IIOUT
OUT (V)
(4) Supply Current vs. Input Voltage
XC6216B/C/D 202
XC6216B/C/D 202
10
9
Supply
(μA)
SupplyCurrent:
CurrentIS:SISS
(uA)
8
Supply Current
Current:: ISISS
S (μA)
(uA)
VIN=4.0V
10
9
7
6
5
4
3
Ta=-40℃
2
Ta=25℃
1
8
12
16
20
Input
VIN
InputVoltage
Voltage:: V
IN (V)
24
6
5
4
3
2
0
-40
0
4
7
1
Ta=85℃
0
8
28
-20
0
20
40
60
80
Ambient Temprature: Ta (℃)
XC6216B/D 332
10
10
9
9
8
8
Supply Current
Current:: ISISS
(uA)
A)
S (μ
Supply
SupplyCurrent
Current:
: ISS
ISS (uA)
(μA)
XC6216B/D 332
7
6
5
4
3
Ta=-40℃
2
Ta=25℃
1
Ta=85℃
4
8
12
16
20
InputVoltage
Voltage:
V IN(V)
(V)
Input
: VIN
26/43
24
VIN=5.3V
7
6
5
4
3
2
1
0
0
100
28
0
-40
-20
0
20
40
60
Ambient Temprature: Ta (℃)
80
100
150
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(4) Supply Current vs. Input Voltage (Continued)
XC6216B/D 502
10
10
9
9
8
8
Supply
S (μA)
Supply Current:
Current :ISISS
(uA)
Supply
: ISS
SupplyCurrent
Current:
ISS (uA)
(μA)
XC6216B/D 502
7
6
5
4
3
Ta=-40℃
2
Ta=25℃
1
0
4
8
12
16
20
7
6
5
4
3
2
1
Ta=85℃
0
VIN=7.0V
0
24
-40
28
-20
0
XC6216B/D C02
40
60
80
100
XC6216B/D C02
10
VIN=14.0V
10
9
9
Supply Current:
S (μA)
Current :ISISS
(uA)
8
Supply Current
Current::ISISS
(uA)
S (μA)
20
Ambient Temperature: Ta ( ℃)
Input
: VIN
InputVoltage
Voltage:
V IN(V)
(V)
7
6
5
4
3
Ta=-40℃
2
Ta=25℃
1
0
4
8
12
16
20
24
7
6
5
4
3
2
1
Ta=85℃
0
8
28
0
-40
-20
0
20
40
60
80
100
Ambient Temprature: Ta ( ℃)
Input
InputVoltage
Voltage:: VIN
V IN (V)
(V)
(5) Output Voltage vs. Ambient Temperature
XC621B/C/D 202
XC6216B/D 332
CIN=CL=1.0μF (ceramic)
2.20
3.45
Output
OutputVoltage:
VoltageV:OUT
VOUT
(V) (V)
2.15
Voltage:: VVOUT
OUT (V)
Output Voltage
(V)
C IN=C L=1.0μF (ceramic)
3.50
2.10
2.05
2.00
1.95
1.90
IOUT=1mA
1.85
IOUT=10mA
3.30
3.25
IOUT=1mA
3.20
IOUT=10mA
IOUT=20mA
3.10
1.80
-25
0
25
50
75
Ambient Temperature: Ta (℃）
3.35
3.15
IOUT=20mA
-50
3.40
100
-50
-25
0
25
50
75
Ambient Temperature: Ta ( ℃)
100
27/43
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5) Output Voltage vs. Ambient Temperature
XC6216B/D 502
XC6216B/D C02
C IN=C L=1.0μF (ceramic)
5.20
5.15
12.15
Voltage :VVOUT
(V)
Output Voltage:
OUT (V)
Output Voltage:
Voltage :VVOUT
(V)
OUT (V)
C IN=C L=1.0μF (ceramic)
12.20
5.10
5.05
5.00
4.95
IOUT=1mA
4.90
IOUT=10mA
4.85
12.10
12.05
12.00
11.95
IOUT=1mA
11.90
IOUT=10mA
11.85
IOUT=20mA
IOUT=20mA
11.80
4.80
-50
-25
0
25
50
75
Ambient Temperature: Ta (℃)
-50
100
-25
0
25
50
75
Ambient Temperature: Ta ( ℃）
100
(6) Line Transient Response
XC6216B/C/D 202
I OUT=1mA, tr=tf =5μs
Input Voltage
2.3
5.0
2.2
2.1
3.0
Output Voltage
2.0
2.0
1.0
0.0
0.0
XC6216B/D 332
28/43
I OUT=30mA, tr=tf =5μs
7.0
3.6
6.0
3.4
Input
IN (V)
InputVoltage:
Voltage V: VIN
(V)
3.7
C L=1μF (ceramic), Ta=25℃
3.7
3.6
Input Voltage
5.0
4.0
3.5
Output Voltage
3.4
3.0
3.3
3.2
2.0
3.2
3.1
1.0
3.3
2.0
Time (1ms/div)
1.8
Time (1ms/div)
3.0
1.0
Output Voltage
1.8
3.5
Output Voltage
2.1
3.0
1.9
Output
OutputVoltage
Voltage:: VOUT
V OUT (V)
(V)
Input
IN (V)
Input Voltage:
Voltage :VVIN
(V)
4.0
2.2
1.0
Input Voltage
5.0
Input Voltage
1.9
I OUT=1mA, tr=tf =5μs
6.0
2.3
2.0
XC6216B/D 332
C L=1μF (ceramic), Ta=25℃
2.4
2.0
Time (1ms/div)
7.0
4.0
I OUT=30mA, tr=tf =5μs
C L=1μF (ceramic), Ta=25℃
3.1
Time (1ms/div)
Output Voltage:
OUT (V)
Voltage :VVOUT
(V)
4.0
6.0
Voltage :VVIN
Input Voltage:
IN (V)
Input
IN (V)
InputVoltage:
VoltageV: VIN
(V)
5.0
2.4
Voltage :VVOUT
(V)
Output Voltage:
OUT (V)
6.0
C L=1μF (ceramic), Ta=25℃
Output
OutputVoltage
Voltage:: VOUT
V OUT (V)
(V)
XC6216B/C/D 202
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6) Line Transient Response (Continued)
XC6216B/D 502
I OUT=30mA, tr=tf =5μs
C L=1μF (ceramic), Ta=25℃
C L=1μF (ceramic), Ta=25℃
5.3
8.0
Input Voltage
7.0
5.2
5.1
Output Voltage
5.0
5.0
4.0
4.9
3.0
4.8
5.3
Input Voltage
7.0
5.2
6.0
5.0
5.0
4.0
4.9
3.0
4.8
Time (1ms/div)
Time (1ms/div)
XC6216B/D C02
XC6216B/D C02
I OUT=1mA, tr=tf =5μs
I OUT=30mA, tr=tf =5μs
C L=1μF (ceramic), Ta=25℃
C L=1μF (ceramic), Ta=25℃
16.0
12.3
15.0
Input Voltage
14.0
12.2
13.0
12.1
Output Voltage
12.0
12.0
11.0
10.0
Voltage :VVIN
Input Voltage:
IN (V)
Input
Input Voltage
Voltage:: VVIN
(V)
IN (V)
15.0
12.4
OutputVoltage
Voltage:
V OUT (V)
Output
: VOUT
(V)
16.0
5.1
Output Voltage
12.4
12.3
Input Voltage
14.0
12.2
13.0
12.1
Output Voltage
12.0
12.0
11.9
11.0
11.9
11.8
10.0
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
(V)
6.0
5.4
Output
Voltage:
V OUT (V)
(V)
Output
Voltage
: VOUT
9.0
Input
InputVoltage
Voltage:: VIN
V IN(V)
(V)
Input Voltage
Voltage::VVIN
IN (V)
8.0
5.4
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
(V)
9.0
XC6216B/D 502
I OUT=1mA, tr=tf =5μs
11.8
Time (1ms/div)
Time (1ms/div)
(7) Load Transient Response
XC6216B/C/D 202
XC6216B/D 332
VIN=5.3V, tr=tf=5us
CIN=CL=1.0uF(ceramic), Ta=25℃
4
120
Output Voltage
3
90
2
60
30
1
Output Current
30
5
4
0
Time (1ms/div)
120
Output Voltage
3
90
2
60
30m
1
1m
0
150
Output Current
30
Output Current : IOUT (mA)
150
Output Vltage : VOUT (V)
5
Output Current : IOUT (mA)
Output Voltage : VOUT (V)
VIN=4.0V, tr=tf=5us
CIN=CL=1.0uF(ceramic), Ta=25℃
1m
0
0
Time (1ms/div)
29/43
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(7) Load Transient Response (Continued)
XC6216B/D 502
XC6216B/D C02
VIN=14.0V, tr=tf=5us
7
150
14
150
6
120
13
120
90
4
60
30m
Output Current
3
30
Output Voltage : VOUT (V)
Output Voltage
5
1m
2
Output Voltage
12
90
11
60
9
0
Output Current
30
10
30
1m
Output Current : IOUT (mA)
CIN=CL=1.0uF(ceramic), Ta=25℃
Output Current : IOUT (mA)
Output Voltage : VOUT (V)
VIN=7.0V, tr=tf=5us
CIN=CL=1.0uF(ceramic), Ta=25℃
0
Time (1ms/div)
Time (1ms/div)
(8) Input Rise Time
XC6216B/C/D 202
XC6216B/C/D 202
VIN=4.0V, tr=5μs
6
6
4
0
3
Output Voltage
-2
2
-4
1
-6
4
5
2
4
0
-2
2
-4
1
-6
0
0
Time (1ms/div)
Time(1ms/div)
XC6216B/D 332
VIN=5.3V, tr=5us
VIN=5.3V, tr=5us
IOUT=30mA、CL=1uF(ceramic),Ta=25℃
8
Input Voltage
7
6
2
5
Output Voltage
4
3
-4
2
-6
1
-8
0
Time(1ms/div)
6
Input Voltage : VIN (V)
4
-2
30/43
8
Output Voltage : VOUT (V)
Input Voltage : VIN (V)
XC6216B/D 332
IOUT=1mA、CL=1uF(ceramic),Ta=25℃
8
0
3
Output Voltage
8
Input Voltage
7
4
6
2
5
0
Output Voltage
4
-2
3
-4
2
-6
1
-8
0
Time(1ms/div)
OutputVoltage:
VoltageV: VOUT
(V)
Output
OUT (V)
2
Input
VIN
InputVoltage
Voltage:: V
(V)
IN (V)
5
Output
(V)
Output Voltage
Voltage::VVOUT
OUT (V)
4
6
6
Input Voltage
Input Voltage
Input
IN (V)
InputVoltage:
Voltage V
: VIN
(V)
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
Output Voltage : VOUT (V)
6
VIN=4.0V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Input Rise Time (Continued)
XC6216B/D 502
XC6216B/D 502
VIN=7.0V, tr=5us
Input Voltage
4
2
8
8
7
6
6
4
5
Output Voltage
Input Voltage : VIN (V)
3
-4
2
1
-6
1
0
-8
3
-4
2
-6
-8
XC6216B/D C02
VIN=14.0V, tr=5us
18
15
15
10
9
-5
6
-10
Input Voltage : VIN (V)
0
Output Voltage : VOUT (V)
12
Output Voltage
-15
15
5
12
Output Voltage
0
9
-5
6
3
-10
3
0
-15
Time (1ms/div)
0
Time (1ms/div)
XC6216B/C/D 202
VIN=4.0V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
18
Input Voltage
Input Voltage
5
VIN=14.0V, tr=5us
IOUT=30mA、CL=1μF(ceramic),Ta=25℃
XC6216B/C/D 202
VIN=4.0V, tr=5μs
6
6
CE Input Voltage
2
4
0
3
Output Voltage
-2
2
-4
1
-6
0
CE
: VCE
CEInput
InputVoltage
Voltage:
V CE(V)
(V)
5
6
CE Input Voltage
Output
: VOUT
OutputVoltage
Voltage:
V OUT (V)
(V)
4
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
4
5
2
4
3
0
Output Voltage
-2
2
-4
1
-6
0
Output
Voltage:
V OUT(V)
(V)
Output
Voltage
: VOUT
IOUT=1mA、CL=1μF(ceramic),Ta=25℃
10
Input Voltage : VIN (V)
0
Time (1ms/div)
XC6216B/D C02
CE
VCE
(V)
CE Input
Input Voltage
Voltage:: V
CE (V)
5
Output Voltage
-2
-2
Time (1ms/div)
6
2
Time (1ms/div)
6
7
4
4
(9) CE Rise Time
Input Voltage
8
0
0
15
IOUT=30mA、CL=1μF(ceramic),Ta=25℃
Output Voltage : VOUT (V)
Input Voltage : VIN (V)
6
IOUT=1mA、CL=1μF(ceramic),Ta=25℃
Output Voltage : VOUT (V)
8
Output Voltage : VOUT (V)
VIN=7.0V, tr=5us
Time(1ms/div)
31/43
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) CE Rise Time (Continued)
XC6216B/D 332
XC6216B/D 332
VIN=5.3V, tr=5μs
6
4
6
2
5
Output Voltage
4
-2
3
-4
2
-6
-8
6
2
5
0
4
-2
2
1
-6
1
0
-8
0
Time (1ms/div)
VIN=7.0V, tr=5μs
VIN=7.0V, tr=5μs
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
8
7
6
4
6
2
5
Output Voltage
4
-2
3
-4
2
-6
-8
(V)
CE Input Voltage
Voltage::VVCE
CE (V)
8
Output Voltage:
Voltage :VVOUT
(V)
Output
OUT (V)
CE
(V)
CEInput
InputVoltage:
VoltageV: CE
VCE
(V)
XC6216B/D 502
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
CE Input Voltage
0
2
5
0
Output Voltage
3
-4
2
1
-6
1
0
-8
0
Time (1ms/div)
XC6216B/D C02
VIN=14.0V, tr=5μs
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
18
15
10
15
10
15
5
12
5
12
CE Input Voltage
Output Voltage
9
0
Output Voltage
9
-5
6
3
-10
3
0
-15
-5
6
-10
-15
Time (1ms/div)
CE
CEInput
InputVoltage
Voltage:: VCE
V CE (V)
(V)
0
18
CE Input Voltage
Output
Voltage
: VOUT
Output
Voltage:
V OUT(V)
(V)
CE
: VCE
CEInput
InputVoltage
Voltage:
V CE(V)
(V)
4
-2
VIN=14.0V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
7
CE Input Voltage
6
XC6216B/D C02
15
8
4
Time (1ms/div)
32/43
3
Output Voltage
-4
XC6216B/D 502
6
7
4
Time (1ms/div)
8
CE Input Voltage
Output
(V)
OutputVoltage
Voltage:: VOUT
V OUT (V)
0
8
0
Time (1ms/div)
OutputVoltage
Voltage:
V OUT(V)
(V)
Output
: VOUT
7
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
Output
: VOUt
OutputVoltage
Voltage:
V OUT(V)
(V)
CEInput
InputVoltage:
Voltage V: VIN
(V)
CE
CE (V)
6
8
CE
CEInput
InputVoltage
Voltage:: VCE
V CE (V)
CE Input Voltage
VIN=5.3V, tr=5μs
8
Output
(V)
Output Voltage
Voltage:: VVOUT
OUT (V)
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
8
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Rate
XC6216B/C/D 202
XC6216B/C/D 202
VIN=4.0Vdc+0.5Vp-p, I OUT=1mA
PSRRRate:
(dB) PSRR (dB)
Ripple Rejection
70
60
50
40
30
20
10
0
0.01
0.1
1
10
C L=1μF (ceramic),Ta=25℃
90
80
80
70
60
50
40
30
20
10
0
0.01
100
0.1
XC6216B/D 332
CL=1μF(ceramic),Ta=25℃
Ripple Rejection Rate : PSRR (dB)
Ripple Rejection Rate : PSRR (dB)
CL=1μF(ceramic),Ta=25℃
90
70
60
50
40
30
20
10
0.1
1
10
80
70
60
50
40
30
20
10
0
0.01
100
0.1
Ripple Frequency : f (kHz)
10
100
XC6216B/D 502
VIN=7.0Vdc+0.5Vp-p, I OUT=30mA
VIN=7.0Vdc+0.5Vp-p, I OUT=1mA
C L=1μF (ceramic),Ta=25℃
C L=1μF (ceramic),Ta=25℃
90
80
Ripple Rejection
Rate:
PSRR
(dB)PSRR (dB)
80
70
60
50
40
30
20
10
0
0.01
1
Ripple Frequency : f (kHz)
XC6216B/D 502
90
100
VIN=5.3Vdc+0.5Vp-p, IOUT=30mA
80
0
0.01
10
XC6216B/D 332
VIN=5.3Vdc+0.5Vp-p, IOUT=1mA
90
1
Frequency
: f (kHz)
Ripple
Frequency:
f (kHz)
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
Ripple Rejection
PSRR Rate:
(dB) PSRR (dB)
Ripple
Ripple Rejection
Rejection Rate:
Rate: PSRR
PSRR (dB
(dB)
VIN=4.0Vdc+0.5Vp-p, I OUT=30mA
C L=1μF (ceramic),Ta=25℃
90
0.1
1
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
10
100
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
33/43
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Time (Continued)
XC6216B/D C02
XC6216B/D C02
VIN=VCE=14.0Vdc+0.5Vp-p, I OUT=30mA
VIN=VCE=14.0Vdc+0.5Vp-p, I OUT=1mA
C L=1μF (ceramic),Topr=25℃
80
70
60
50
40
30
20
0.1
1
10
Ripple
Frequency:
f (kHz)
Frequeency
: f (kHz)
34/43
80
70
60
50
40
30
20
10
10
0
0.01
C L=1μF (ceramic),Topr=25℃
90
Ripple Rejection
Rate: PSRR (dB)
PSRR (dB)
Ripple Rejection
PSRRRate:
(dB) PSRR (dB)
90
100
0
0.01
0.1
1
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
10
100
XC6216/XE6216
Series
■PACKAGING INFORMATION
1.5±0.1
(0.1)
1.3MAX
1.1±0.1
0.8MIN
5°
4.5MAX
0.2MIN
2.5±0.1
5°
(0.4)
2.8±0.2
+0.2
-0.1
1.6
0.8MIN
●SOT-89-5
●SOT-25
●USP-6C
●USP-6C Reference Pattern Layout
●USP-6C Reference Metal Mask Design
Note: The side of pins are not gilded, but nickel is used.
35/43
XC6216/XE6216 Series
■PACKAGING INFORMATION (Continued)
●SOT-223
●SOT-89
36/43
9.9±0.55
4.32 MAX
2.4 MAX
0.85±0.25
6.1±0.15
1.1±0.25
●TO-252
XC6216/XE6216
Series
■PACKAGING INFORMATION (Continued)
●
SOT-25 Power Dissipation
Power dissipation data for the SOT-25 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
(Board of SOT-26 is used.)
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole:
4 x 0.8 Diameter
評価基板レイアウト（単位：mm）
Evaluation Board (Unit: mm)
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
600
85
240
Thermal Resistance (℃/W)
166.67
Pd-Ta特性グラフ
Pd vs. Ta
Power
Dissipation Pd (mW)
許容損失Pd（mW）
2.
700
600
500
400
300
200
100
0
25
45
65
85
Ambient
Temperature Ta (℃)
周辺温度Ta（℃）
105
125
37/43
XC6216/XE6216 Series
■PACKAGING INFORMATION (Continued)
●
SOT-89-5 Power Dissipation
Power dissipation data for the SOT-89-5 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
て
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material:
2.
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole:
5 x 0.8 Diameter
Evaluation Board (Unit: mm)
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
1300
85
520
Thermal Resistance (℃/W)
76.92
許容損失Pd（mW）
Power Dissipation Pd (mW)
Pd-Ta特性グラフ
Pd vs. Ta
1400
1200
1000
800
600
400
200
0
25
38/43
45
65
85
Ambient
Temperature Ta (℃)
周辺温度Ta（℃）
105
125
XC6216/XE6216
Series
■PACKAGING INFORMATION (Continued)
●
USP-6C Power Dissipation
Power dissipation data for the USP-6C is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
て
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material:
Thickness:
1.6 mm
Through-hole:
4 x 0.8 Diameter
Evaluation Board (Unit: mm)
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
1000
85
400
Thermal Resistance (℃/W)
100.00
Pd-Ta特性グラフ
Pd vs. Ta
許容損失Pd（mW）
Power Dissipation Pd (mW)
2.
Glass Epoxy (FR-4)
1200
1000
800
600
400
200
0
25
45
65
85
Ambient
Temperature Ta (℃)
周辺温度Ta（℃）
105
125
39/43
XC6216/XE6216 Series
■PACKAGING INFORMATION (Continued)
●
SOT-223 Power Dissipation
Power dissipation data for the SOT-223 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material:
2.
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole:
4 x 0.8 Diameter
Evaluation Board (Unit: mm)
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
1500
85
600
Thermal Resistance (℃/W)
66.67
許容損失Pd（mW）
Power Dissipation Pd (mW)
Pd-Ta特性グラフ
Pd vs. Ta
1600
1400
1200
1000
800
600
400
200
0
25
40/43
45
65
85
周辺温度Ta（℃）
Ambient Temperature Ta (℃)
105
125
XC6216/XE6216
Series
■MARKING RULE (XC6216 Series)
●SOT-25, SOT-89,SOT-89-5,USP-6C,SOT-223,TO-252
SOT-25
USP-6C
SOT-89-5
SOT-89
① represents the product number
MARK
PRODUCT SERIES
2
XC6216xxxxxx
② represents the voltage range
MARK
VOLTAGE (V)
0
2.0~3.0
1
3.1~6.0
2
6.1~9.0
3
9.1~12.0
4
2.0~3.0
5
3.1~6.0
6
6.1~9.0
7
9.1~12.0
8
2.0
PRODUCT SERIES
XC6216Bxxxxx
SOT-223
TO-252
XC6216Dxxxxx
XC6216Cxxxxx
③ represents the output voltage
VOLTAGE(V)
MARK
VOLTAGE(V)
MARK
0
-
3.1
6.1
9.1
1
-
3.2
6.2
2
-
3.3
6.3
3
-
3.4
4
-
3.5
5
-
6
-
7
8
E
-
4.6
7.6
10.6
9.2
F
-
4.7
7.7
10.7
9.3
H
-
4.8
7.8
10.8
6.4
9.4
K
-
4.9
7.9
10.9
6.5
9.5
L
2.0
5.0
8.0
11.0
3.6
6.6
9.6
M
2.1
5.0
8.1
11.1
3.7
6.7
9.7
N
2.2
5.2
8.2
11.2
-
3.8
6.8
9.8
P
2.3
5.3
8.3
11.3
-
3.9
6.9
9.9
R
2.4
5.4
8.4
11.4
9
-
4.0
7.0
10.0
S
2.5
5.5
8.5
11.5
A
-
4.1
7.1
10.1
T
2.6
5.6
8.6
11.6
B
-
4.2
7.2
10.2
U
2.7
5.7
8.7
11.7
C
-
4.3
7.3
10.3
V
2.8
5.8
8.8
11.8
D
-
4.4
7.4
10.4
X
2.9
5.9
8.9
11.9
E
-
4.5
7.5
10.5
Y
3.0
6.0
9.0
12.0
④⑤ represents assembly lot number
01,･･･,09, 10,11,･･･,99,0A,･･･,0Z,1A,･･･ repeated (G, I, J, O, Q, W excluded)
Note: No character inversion used.
41/43
XC6216/XE6216 Series
■MARKING RULE (XE6216 Series)
●SOT-89-5
① represents the product number
MARK
PRODUCT SERIES
2
XE6216xxxxxx
② represents the voltage range
MARK
VOLTAGE (V)
0
2.0~3.0
1
3.1~6.0
2
6.1~9.0
3
9.1~12.0
PRODUCT SERIES
SOT-89-5
XE6216Bxxxxx
③ represents the output voltage
VOLTAGE(V)
MARK
VOLTAGE(V)
MARK
0
-
3.1
6.1
9.1
E
-
4.6
7.6
10.6
1
-
3.2
6.2
9.2
F
-
4.7
7.7
10.7
2
-
3.3
6.3
9.3
H
-
4.8
7.8
10.8
3
-
3.4
6.4
9.4
K
-
4.9
7.9
10.9
4
-
3.5
6.5
9.5
L
2.0
5.0
8.0
11.0
5
-
3.6
6.6
9.6
M
2.1
5.0
8.1
11.1
6
-
3.7
6.7
9.7
N
2.2
5.2
8.2
11.2
7
-
3.8
6.8
9.8
P
2.3
5.3
8.3
11.3
8
-
3.9
6.9
9.9
R
2.4
5.4
8.4
11.4
9
-
4.0
7.0
10.0
S
2.5
5.5
8.5
11.5
A
-
4.1
7.1
10.1
T
2.6
5.6
8.6
11.6
B
-
4.2
7.2
10.2
U
2.7
5.7
8.7
11.7
C
-
4.3
7.3
10.3
V
2.8
5.8
8.8
11.8
D
-
4.4
7.4
10.4
X
2.9
5.9
8.9
11.9
E
-
4.5
7.5
10.5
Y
3.0
6.0
9.0
12.0
④ represents assembly lot number
0,･･･,9, A,B,･･･,Z,0,･･･,9,A,B,･･･,Z,0,･･･ repeated (G, I, J, O, Q, W excluded)
Bar marking of a-b-c-d combination represents production year.
Production
Bar marking of e-f-g-h combination represents production month.
Production
e
f
g
h
□
-
-
-
February
-
□
-
-
March
-
-
□
-
-
-
-
□
□
□
-
-
a
b
c
d
Month
xxx0
□
-
-
-
January
xxx1
-
□
-
-
xxx2
-
-
□
-
xxx3
-
-
-
□
April
Year
xxx4
□
□
-
-
May
xxx5
□
-
□
-
June
□
-
□
-
July
□
-
-
□
xxx6
□
-
-
□
xxx7
-
□
□
-
August
-
□
□
-
September
-
□
-
□
□
xxx8
-
□
-
□
xxx9
-
-
□
□
42/43
October
-
-
□
November
□
□
□
-
December
□
□
-
□
XC6216/XE6216
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics.
Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
43/43