July 24, 2007 100BASE-T Copper SFP Transceiver (For 100m reach over Cat 5 UTP cable) Members of FlexonTM Family Standard Compliant with SFP MSA Compliant with IEEE Std 802.3TM-2002 Compliant with FCC 47 CFR Part 15, Class B RoHS compliance and lead free assembly process compatibility Description Fiberxon FTM-C001R-LG 100BASE-T copper SFP transceiver is high performance, cost effective Features module compliant with the 100BASE-T standards as 100Mbps bi-direction data links specified in IEEE 802.3-2002 and IEEE 802.3ab, 100m transmission over unshielded twisted- which supporting 100Mbps up to 100 meters reach pair (UTP) Category 5 Cable over unshielded twisted-pair category-5 cable. Perform any necessary scrambling / descrambling between the 100Base-TX and FTM-C001R-LG is a “Hot-Pluggable” 100Base-TX Ethernet electrical interface SFP module. 100Base-FX formats. Support intelligent auto-negotiation 100BASE-T operation in host systems The FTM-C001R-LG provides standard serial ID Hot-pluggable capability information compliant with SFP MSA, which can be SFP form with compact RJ-45 connector accessed with address of A0h via the two-wire serial With spring latch for high density application CMOS EEPROM protocol. Very low EMI and excellent ESD protection +3.3V single power supply Low power dissipation Operating case temperature: 0 to +70°C The FTM-C001R-LG is RoHS compatible. Detailed product information in EEPROM Applications LAN 100Base-T Switch to Switch interface Switched backplane applications Router/Server interface Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 8 100BASE-T Copper SFP Transceiver 100m transmission over Cat-5 UTP cable Preliminary Data Sheet July 24, 2007 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to Fiberxon regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of the documentation. Table 1 - Regulatory Compliance Feature Standard Electrostatic Discharge MIL-STD-883E (ESD) to the Electrical Pins Method 3015.7 Electrostatic Discharge (ESD) IEC 61000-4-2 to the RJ-45 Receptacle GR-1089-CORE Performance Class 2(>2000 V) Compatible with standards FCC Part 15 Class B Electromagnetic EN55022 Class B (CISPR 22B) Interference (EMI) Compatible with standards VCCI Class B Immunity IEC 61000-4-3 Compatible with standards Component Recognition UL and CSA Compatible with standards Absolute Maximum Ratings Stress in excess of the maximum absolute ratings can cause permanent damage to the module. Table 2 - Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Storage Temperature TS 0 +70 °C Supply Voltage VCC -0.5 3.6 V - 5 95 % Operating Relative Humidity Recommended Operating Conditions Table 3- Recommended Operating Conditions Parameter Symbol Min. Operating Case Temperature TC 0 Power Supply Voltage VCC 3.13 Power Supply Current ICC Data Rate Typical Max. Unit +70 °C 3.30 3.47 V 170 300 mA 100 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 8 Mbps Notes 100BASE-T Copper SFP Transceiver 100m transmission over Cat-5 UTP cable Preliminary Data Sheet July 24, 2007 Host Side Electrical Interface Table 4 - Electrical Characteristics Parameter Symbol Min. Data Input Swing Differential VIN 500 Input Differential Impedance ZIN Data Output Swing Differential VOUT Output Differential Impedance ZOUT Output Data Rise/Fall Time Tr/Tf Typical Max. Unit Notes 2400 mV 1 100 Ω 370 2000 mV 100 2 Ω 3 ns Max. Unit Notes: 1. Internally AC coupled and terminated. 2. Internally AC coupled. Line Side Electrical Interface Table 5 - Electrical Characteristics Parameter Symbol Min. Line Baud Rate Typical 125 Bit Error Rate Notes MBaud -12 BER 10 1 Line Rx Intput Impedance ZIN 100 Ω Line Tx Output Impedance ZOUT 100 Ω Notes: 1. Measured over 100m Cat-5 UTP cable. EEPROM Information The SFP MSA defines a 256-byte memory map in EEPROM describing the transceiver’s capabilities, standard interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit address 1010000X (A0h). The memory contents refer to Table 6. Table 6 - EEPROM Serial ID Memory Contents (A0h) Addr. Field Size (Bytes) Name of Field Hex Description 0 1 Identifier 03 SFP 1 1 Ext. Identifier 04 MOD4 2 1 Connector 00 3—10 8 Transceiver 00 00 00 30 00 00 00 00 11 1 Encoding 02 4B5B 12 1 BR, nominal 01 100M 13 1 Reserved 00 14 1 Length (9um)-km 00 15 1 Length (9um) 00 100BASE-FX/100BASE-LX Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 8 100BASE-T Copper SFP Transceiver 100m transmission over Cat-5 UTP cable 16 1 Length (50um) 00 17 1 Length (62.5um) 00 18 1 Length (copper) 64 19 1 Reserved 20—35 16 Vendor name 36 1 Reserved 37—39 3 Vendor OUI 40—55 16 Vendor PN 56—59 4 Vendor rev xx xx xx xx 60-61 2 Wavelength 00 00 62 1 Reserved 00 63 1 CC BASE xx 64—65 2 Options 00 00 66 1 BR, max 00 67 1 BR, min 00 68—83 16 Vendor SN 84—91 8 92—94 3 Reserved 95 1 CC EXT 96—255 160 Vendor specific Preliminary Data Sheet July 24, 2007 100m 00 46 49 42 45 52 58 4F 4E “FIBERXON INC. “(ASCⅡ) 20 49 4E 43 2E 20 20 20 00 00 00 00 46 54 4D 2D 43 30 30 31 “FTM-C001R-LG ” (ASCⅡ) 52 2D 4C 47 20 20 20 20 ASCⅡ (“31 30 20 20” means 1.0 revision) Check sum of bytes 0 - 62 xx xx xx xx xx xx xx xx ASCⅡ xx xx xx xx xx xx xx xx Vendor date codexx xx xx xx xx xx 20 20 Year (2 bytes), Month (2 bytes), Day (2 bytes) 00 00 00 xx Check sum of bytes 64 - 94 Note: The “xx” byte should be filled in according to practical case. For more information, please refer to the related document of SFP MSA. Recommended Host Board Power Supply Circuit Figure 1 shows the recommended host board power supply circuit. Figure 1, Recommended Host Board Power Supply Circuit Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 4 of 8 100BASE-T Copper SFP Transceiver 100m transmission over Cat-5 UTP cable Preliminary Data Sheet July 24, 2007 20-Pin Definitions Figure 2 below shows the 20-pin numbering of SFP to Host electrical interface. The pin functions are described in Table 7 with some accompanying notes. P in 2 0 T O P V IE W OF BOARD P in 1 1 P in 1 0 B O T T O M V IE W OF BOARD P in 1 Figure 2, Pin View Table 7– Pin Function Definitions Pin No. Name 1 VeeT 2 TX Fault 3 Function Plug Seq. Notes Transmitter Ground 1 Transmitter Fault Indication 3 Note 1 TX Disable Transmitter Disable 3 Note 2 4 MOD-DEF2 Module Definition 2 3 Note 3 5 MOD-DEF1 Module Definition 1 3 Note 3 6 MOD-DEF0 Module Definition 0 3 Note 3 7 Rate Select Not Connected 3 8 LOS Loss of Signal 3 9 VeeR Receiver Ground 1 10 VeeR Receiver Ground 1 11 VeeR Receiver Ground 1 12 RD- Inv. Received Data Out 3 Note 5 13 RD+ Received Data Out 3 Note 5 14 VeeR Receiver Ground 1 15 VccR Receiver Power 2 16 VccT Transmitter Power 2 17 VeeT Transmitter Ground 1 18 TD+ Transmit Data In 3 Note 6 19 TD- Inv. Transmit Data In 3 Note 6 20 VeeT Transmitter Ground 1 Note 4 Notes: 1. TX Fault is not used and tied to ground within the module. 2. TX Disable is not used and is not connected within the module. 3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7k~10kΩ resistor on Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 5 of 8 100BASE-T Copper SFP Transceiver 100m transmission over Cat-5 UTP cable Preliminary Data Sheet July 24, 2007 the host board. The pull-up voltage shall be VccT or VccR. MOD-DEF 0 is tied to ground within the module. MOD-DEF 1 is the clock line of two wire serial interface for serial ID MOD-DEF 2 is the data line of two wire serial interface for serial ID 4. LOS is not used and tied to ground within the module. 5. These are the differential receiver output. They are internally AC-coupled 100Ω differential lines which should be terminated with 100Ω (differential) at the user SERDES. 6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential termination inside the module. Mechanical Design Diagram The mechanical design diagram is shown in Figure 3. Figure 3, Mechanical Design Diagram Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 6 of 8 100BASE-T Copper SFP Transceiver 100m transmission over Cat-5 UTP cable Preliminary Data Sheet July 24, 2007 Ordering information Part No. FTM-C001R-LG Product Description 100Mbps, 100base-TX convert to 100base-FX, Copper SFP with spring latch, 0°C~+70°C， ROHS compliance Related Documents For further information, please refer to the following documents: ■ Fiberxon SFP Application Notes ■ Fiberxon 100BASE-T Copper SFP Application Note ■ SFP Multi-Source Agreement (MSA) Obtaining Document You can visit our website: http://www.fiberxon.com Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents. Revision History Revision Rev. 1a Initiate Review Approve Unvier.Yang Armstrong.tian Tripper.huang Subject Initial datasheet Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 7 of 8 Release Date July 24, 2007 100BASE-T Copper SFP Transceiver 100m transmission over Cat-5 UTP cable Preliminary Data Sheet July 24, 2007 © Copyright Fiberxon Inc. 2007 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarter: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 8 of 8