SSC 1N4005

1N4004
General Purpose Plastic Rectifiers
PRODUCT SUMMARY
Reverse Voltage 50 to 1000 Volts
Forward current 1.0 Ampere
FEATURES
Plastic package has Underwriters Laboratories Flammability
Classification 94V-0
Construction utilizes void-free molded plastic technique
Low reverse leakage
High forward surge capability
High temperature soldering guaranteed:
o
250 C /10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
o
o
TJ is 150 C (Max.) and TSTG is 175 C (Max.) with PI glue
MECHANICAL DATA
Case: JEDEC DO-204AL (DO-41)/A-405, molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: DO-41 - 0.012 ounce, 0.33 gram
A-405 - 0.008 ounce, 0.23 gram
Note: Lead diameter is 0.025(0.64)/0.021(0.53) for suffix “S” part numbers
Pb-free; RoHS-compliant
07/04/2007 Rev.1.00
www.SiliconStandard.com
1
1N4004
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
Ratings at 25 C ambient temperature unless otherwise specified.
Parameter
Symbols
1N 4001
1N 4002
1N 4003
1N 4004
1N 4005
1N 4006
1N 4007
Units
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Volts
50
100
200
400
600
800
1000
Volts
Maximum DC blocking voltage
VDC
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=50oC
IF(AV)
1.0
Amp
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method) TA=50oC
IFSM
30.0
Amps
Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length at TL=75oC
IR(AV)
30
uA
Maximum instantaneous forward voltage at 1.0A
VF
1.1
Volts
IR
5.0
50
uA
trr
1.0
uS
pF
Maximum DC reverse current
at rated DC blocking voltage
TA=25oC
TA=100oC
Typical reverse recovery time at
IFM=20mA, IRM=1mA (Note 2)
Typical junction capacitance at 4.0V, 1MHz
Typical thermal resistance (Note 1)
Operating junction temperature range
Storage temperature range
Notes:
CJ
15
RθJA
RθJL
50.0
25.0
TJ
-55 to +125
o
C
-55 to +150
o
C
TSTG
o
C/W
1. Thermal resistance from junction to ambient, and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
2. Measured on Tektronix type "S" recovery plug-in. Tektronix 545 scope or equivalent
07/04/2007 Rev.1.00
www.SiliconStandard.com
2
1N4004
RATINGS AND CHARACTERISTIC CURVES
o
(TA=25 Cunless otherwise noted)
Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no
guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no
responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its
use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including
without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to
the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of
Silicon Standard Corporation or any third parties.
07/04/2007 Rev.1.00
www.SiliconStandard.com
3