HSW11□2LTM Series Right Angle Type White LED Features Package Product features Right Angle Type, 1142LTM : Diffused pale yellow resin, 1152LTM : Diffused pale orange resin ・Outer Dimension 2.8 x 0.95 x 0.8mm ( L x W x H ) ・Temperature range Storage Temperature : -40℃～100℃ Operating Temperature : -30℃～85℃ ・Lead–free soldering compatible ・RoHS compliant Chromaticity coordinates x = 0.299YP., y = 0.296TYP. (Condition : IF=20mA) Spatial distribution 115 deg. Die materials InGaN Rank grouping parameter Sorted by luminous intensity and chromaticity per rank taping Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Recommendation of Reflow soldering / Flow Soldering (Dip Soldering) is impossible. Taping and reel 3,000pcs per reel in a 8mm width tape. (Standard) Reel diameter:φ180mm ESD 1kV (HBM) Recommended Applications Cellular Phone, Mobile Equipment, Electric Household Appliances, Other General Applications 2008.12.22 Page 1 HSW11□2LTM Series Right Angle Type White LED Color and Luminous Intensity Part No. Material Emitted Color Lens Color (Ta=25℃) Luminous Intensity InGaN White HSW1152LTM※ 1 InGaN White φ v (lm) Iv (mcd) MIN. HSW1142LTM Luminous Flux Pale 1,720 Yellow Pale 1,200 Orange TYP. IF TYP. IF 2,000 20 5.0 20 1,440 20 3.6 20 ※1 High Color reproduction Type ※Note : The above luminous intensity(Iv) is the setup values of the sorting machine. (Tolerance : IV…±10%) 2008.12.22 Page 2 HSW11□2LTM Series Right Angle Type White LED Absolute Maximum Ratings Item Symbol Power Dissipation Forward Current Pulse Forward Current ※ 1 Derating (Ta=25℃ or higher) Reverse Voltage Operating Temperature Storage Temperature (Ta=25℃) Absolute Maximum Ratings Unit 1142LTM 1152LTM Pd 114 114 mW IF 30 30 mA IFRM 100 100 mA ⊿ IF 0.4 0.4 mA/ ℃ ⊿ IFRM 1.33 1.33 mA/ ℃ VR 5 5 V Topr -30～ +85 ℃ Tstg -40～ +100 ℃ ※1 IFRM Measurement condition : Pulse Width≦1ms, Duty≦1/20 2008.12.22 Page 3 HSW11□2LTM Series Right Angle Type White LED Electro-Optical Characteristics Item Forward Condition (Ta=25℃) Characteristics Symbol 1142LTM 1152LTM TYP. 3.2 3.2 MAX. 3.5 3.5 Unit Voltage ※ 1 IF =20mA V Reverse Current VR =5V IR MAX. 50 50 μA Half Intensity Angle IF =20mA 2θ 1/2 TYP. 115 115 deg. Chromaticity Coordinates x TYP. 0.299 0.299 - IF =20mA y TYP. 0.296 0.296 - VF ※1 Forward Voltage Tolerance Range : ±0.1V 2008.12.22 Page 4 HSW11□2LTM Series Right Angle Type White LED Luminous Intensity Rank (1142LTM) (Ta=25℃) Intensity Tolerance each Rank : +/-10% Rank VC VD WA WB I V （mcd） Condition MIN. MAX. 1,720 1,860 1,860 2,000 IF=20mA 2,000 2,200 2,200 2,400 ※Please contact our sales staff concerning rank designation. Luminous Intensity Rank (1152LTM) (Ta=25℃) Intensity Tolerance each Rank : +/-10% Rank UC UD VA VB VC I V （mcd） Condition MIN. MAX. 1,200 1,300 1,300 1,440 1,440 1,580 IF=20mA 1,580 1,720 1,720 1,860 ※Please contact our sales staff concerning rank designation. 2008.12.22 Page 5 HSW11□2LTM Series Right Angle Type White LED Sorting Chart for Chromaticity Coordinates (Ta=25℃) Chromaticity Coordinates Tolerance Each Rank : +/-0.01 LEFT DOWN point LEFT UP point RIGHT UP point RIGHT UP point Rank x y x y x y x y 1p 0.272 0.258 0.264 0.267 0.276 0.281 0.282 0.272 1q 0.280 0.248 0.272 0.258 0.282 0.272 0.288 0.262 1r 0.282 0.272 0.276 0.281 0.287 0.295 0.292 0.286 1s 0.288 0.262 0.282 0.272 0.292 0.286 0.296 0.276 2p 0.292 0.286 0.287 0.295 0.297 0.305 0.300 0.295 2q 0.296 0.276 0.292 0.286 0.300 0.295 0.304 0.285 2r 0.300 0.295 0.297 0.305 0.307 0.315 0.309 0.305 2s 0.304 0.285 0.300 0.295 0.309 0.305 0.311 0.294 ※ Please contact our sales staff concerning rank designation. 2008.12.22 Page 6 HSW11□2LTM Series Right Angle Type White LED Technical Data (1142LTM) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 20mA Relative Intensity Condition : Ta = 25℃ Wavelength [nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Forward Voltage VF(V) 2008.12.22 Condition : Ta = 25℃ Relative Intensity Forward Current IF(mA) Condition : Ta = 25℃ Forward Current IF(mA) Page 7 HSW11□2LTM Series Right Angle Type White LED Technical Data (1142LTM) Derating Ambient Temperature vs. Relative Intensity Condition : IF = 20mA Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Ambient Temperature vs. Forward Voltage Forward Current vs. Chromaticity Ambient Temperature : Ta(℃) 2008.12.22 Condition : Ta = 25℃ y Forward Voltage VF(V) Condition : IF = 20mA x Page 8 HSW11□2LTM Series Right Angle Type White LED Technical Data (1142LTM) Ambient Temperature vs. Chromaticity y Condition : IF = 20mA x 2008.12.22 Page 9 HSW11□2LTM Series Right Angle Type White LED Technical Data (1152LTM) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 20mA Relative Intensity Condition : Ta = 25℃ Wavelength [nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Forward Voltage VF(V) 2008.12.22 Condition : Ta = 25℃ Relative Intensity Forward Current IF(mA) Condition : Ta = 25℃ Forward Current IF(mA) Page 10 HSW11□2LTM Series Right Angle Type White LED Technical Data (1152LTM) Derating Ambient Temperature vs. Relative Intensity Condition : IF = 20mA Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Ambient Temperature vs. Forward Voltage Forward Current vs. Chromaticity Ambient Temperature : Ta(℃) 2008.12.22 Condition : Ta = 25℃ y Forward Voltage VF(V) Condition : IF = 20mA x Page 11 HSW11□2LTM Series Right Angle Type White LED Technical Data (1152LTM) Ambient Temperature vs. Chromaticity y Condition : IF = 20mA x 2008.12.22 Page 12 HSW11□2LTM Series Right Angle Type White LED Package Dimensions (Unit: mm) Weight: (5.3)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) ・Quantity: 3,000pcs/ reel (standard) 2008.12.22 Page 13 HSW11□2LTM Series Right Angle Type White LED Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2008.12.22 350 ℃ 3 s 1 time (MAX.) (MAX.) (MAX.) Page 14 HSW11□2LTM Series Right Angle Type White LED Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. Storage Life High Temp. Storage Life Low Temp. Storage Life Cycled Temp. Humidity Life EIAJ ED4701/ 100(101) EIAJ ED4701/ 100(101) EIAJ ED4701/ 100(101) EIAJ ED4701/ 100(102) EIAJ ED4701/ 100(103) EIAJ ED4701/ 100(105) EIAJ ED4701/ 200(201) EIAJ ED4701/ 200(202) EIAJ ED4701/ 200(203) Resistance to Reflow Soldering EIAJ ED4701/ 300(301) Electric Static Discharge (ESD) Vibration, Variable Frequency EIAJ ED4701/ 300(304) EIAJ ED4701/ 400(403) Thermal Shock Testing Conditions Duration Failure Ta = 25℃, IF = 30mA 1,000 h 0/ 20 Ta = 85℃ ,IF = 6mA 1,000 h 0/ 20 Ta = -30℃, IF = 20mA 1,000 h 0/ 20 Ta = 60℃, 90%, IF = 16mA 1,000 h 0/ 20 Ta = 60℃, 90% 1,000 h 0/ 20 200 cycles 0/ 20 Ta = 100℃ 1,000 h 0/ 20 Ta = -40℃ 1,000 h 0/ 20 10 cycles 0/ 20 Twice 0/ 20 once each polarity 0/ 20 2h 0/ 20 Ta = -40℃ ～ 100℃ (each 15min.) Ta = -10℃ ～ 65℃, 95%, 24h/ cycle Preheat : 150 ～ 180℃(120s Max.) Soldering Temp. : 260℃(5s) Moisture Soak : 30℃, 70%, 72h C = 100pF, R2 = 1.5KΩ, ±1,000V 2 98.1m/ s (10G), 100 ～ 2KHz, 20min, XYZ each direction Failure Criteria Items Symbols Conditions Failure criteria Luminous Intensity Iv IF=20mA Testing Min. Value ＜ Spec. Min. Value x 0.7 Forward Voltage VF IF=20mA Testing Max. Value ≧ Spec. Max. Value x 1.2 Reverse Current IR VR=5V Testing Max. Value ≧ Spec. Max. Value x 2.5 Cosmetic Appearance - - Occurrence of notable decoloration, deformation and cracking 2008.12.22 Page 15 HSW11□2LTM Series Right Angle Type White LED Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2008.12.22 Page 16