PS1102FA Surface Mount Phototransistor/Right Angle Type Features Package Product features Right Angle type, Water clear epoxy ・Outer Dimension 3.0 x 1.2 x 2.5 mm ( L x W x H ) ・Photo Current : 7mA TYP. (VCE=5V,Ee=5mW/cm2) ・Lead–free soldering compatible ・RoHS compliant Peak Sensitivity Wavelength 880nm Half Intensity Angle θx = 50 deg., θy = 100 deg. Die materials Si Rank grouping parameter Sorted by photo current per rank taping Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Reflow soldering, and manual soldering ※Please refer to Soldering Conditions about soldering. Taping and reel 3,000pcs per reel in a 8mm width tape. (Standard) Reel diameter:φ180mm ESD 2kV (HBM) Recommended Applications Car Audio, Electric Household Appliances, OA/FA, PC/Peripheral Equipment, Other General Applications 2006.8.31 Page 1 PS1102FA Surface Mount Phototransistor/Right Angle Type Absolute Maximum Ratings (Ta=25℃) Item Symbol Absolute Maximum Ratings Unit Collector Dissipation Pc 75 mW Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 5 V Collector Current Ic 20 mA Operating Temperature Topr -30～+85 ℃ Storage Temperature Tstg -40～+100 ℃ Electro-Optical Characteristics Item Photo Current (Ta=25℃) Conditions VCE=5V, 2 ※1 Ee=5mW/cm Symbol Ic Characteristics Unit Min. 1.4 mA TYP. 7 mA Response Time VCE =10V, Ic=2mA, RL=100Ω tr/tf TYP. 8/9 μs Dark Current VCEO=10V ICEO Max. 0.1 μA Peak Sensitivity Wavelength VCE=5V λp TYP. 880 nm Spatial Half Width VCE=5V ⊿θ TYP. 50(θx) 100(θy) deg. ※1 Color temperature is 2,856K. Employs a standard tungsten lamp. 2005.9.29 Page 2 PS1102FA Surface Mount Phototransistor/Right Angle Type Photo Current Rank (Ta=25℃) Ic(mA) R ank Condition MIN. MAX . A 1.4 4.2 B 2.4 7.2 C 4.2 12.6 D 7.2 21.6 E 12.6 37.8 V CE = 5V E e = 5mW/cm 2 ※Please contact our sales staff concerning rank designation. 2005.9.29 Page 3 PS1102FA Surface Mount Phototransistor/Right Angle Type Technical Data Relative Sensitivity vs. Sensitivity Wavelength Spatial Distribution Example Condition : Ta = 25℃, VCE = 5V Relative Sensitivity Condition : Ta = 25℃ Sensitivity Wavelength [nm] Radiation Luminance vs. Relative Photo Current Collector-Emitter Voltage vs. Photo Current Radiation Luminance Ee(mW/cm2) It is based on Ee=5mW/cm2. Employs a standard tungsten lamp of 2,856K. 2005.9.29 Condition : Ta = 25℃ Photo Current Ic (mA) Relative Photo Current Ic Condition : Ta = 25℃, VCE = 5V Collector-Emitter Voltage VCE(V) Employs a standard tungsten lamp of 2,856K. Page 4 PS1102FA Surface Mount Phototransistor/Right Angle Type Technical Data Response Time Measuring Circuit Load Resistance vs. Response Time Response Time (μs) Condition : VCE=10V, Ic=2mA, Ta=25℃ Load Resistance : RL(Ω) Ambient Temperature vs. Collector Dissipation Ambient Temperature vs. Dark Current Dark Current : ICEO(A) Collector Dissipation : Pc(mW) Condition : VCEO = 10V Ambient Temperature : Ta(℃) 2005.9.29 Ambient Temperature : Ta(℃) Page 5 PS1102FA Surface Mount Phototransistor/Right Angle Type Technical Data Ambient Temperature vs. Relative Photo Current Relative Photo Current Ic (mA) Condition : VCE = 5V Ambient Temperature : Ta(℃) 2005.9.29 Page 6 PS1102FA Surface Mount Phototransistor/Right Angle Type Package Dimensions (Unit: mm) Weight: (10.0)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) Quantity: 3,000pcs/ reel (standard) 2005.9.29 Page 7 PS1102FA Surface Mount Phototransistor/Right Angle Type Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the device resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the device from absorbing moisture. 3) Temperature fluctuation to the device during the pre-heating process shall be minimized. Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2005.9.29 350 ℃ 3 s 1 time (MAX.) (30 W Max.) (MAX.) (MAX.) Page 8 PS1102FA Surface Mount Phototransistor/Right Angle Type Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life EIAJ ED4701/100(101) Ta = 25℃, Pc = Maxium Rated Power Dissipation Resistance to Soldering Heat EIAJ ED4701/300(301) (Pretreatment) Individual standard (Reflow Soldering) Pre-heating 150℃～180℃ 120s Operating Heating 230℃ Min. Peak temperature 260℃ Temperature Cycling EIAJ ED4701/100(105) Wet High Temp. Storage Life EIAJ ED4701/100(103) High Temp. Storage Life Low Temp. Storage Life EIAJ ED4701/200(201) EIAJ ED4701/200(202) Vibration, Variable Frequency EIAJ ED4701/400(403) Testing Conditions Duration Failure 1,000 h 0/16 Twice 0/16 Minimum Rated Storage Temperature(30min) ～Normal Temperature(15min) ～Maximum Rated Storage Temperature(30min) ～Normal Temperature(15min) 5 cycles 0/16 Ta = 60±2℃, RH = 90±5% 1,000 h 0/16 Ta = Maximum Rated Storage Temperature 1,000 h 0/16 Ta = Minimum Rated Storage Temperature 1,000 h 0/16 2h 0/16 2 98.1m/s (10G), 100 ～ 2KHz sweep for 20min., XYZ each direction Failure Criteria Items Symbols Conditions Failure criteria Photo Current IC EE Value of each product Irradiance of Photo Current VCE Value of each product Collector-emitter Voltage of Photo Current Testing Max. Value ≧Initial Value x 1.3 Testing Min. Value ≦ Initial Value x 0.7 Dark Current ICEO VCEO Value of each product Collector-emitter Voltage of Dark Current Testing Max. Value ≧ Spec. Max. Value x 1.2 Cosmetic Appearance - - Occurrence of notable decoloration, deformation and cracking 2007.8.31 Page 9 PS1102FA Surface Mount Phototransistor/Right Angle Type Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31 Page 10