1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Product features Package Product features PLCC-2 Bathtub Type. Water clear epoxy ・Outer Dimension 3.5 x 2.8 x 1.9mm( L x W x H ) ・Wide operation temperature range Storage Temperature : -40℃～110℃ Operating Temperature : -40℃～100℃ Operation Guarantee ・Ramification of luminosity group sorting. It is possible to have a uniform transmission with little irregularities even when several are lined up. ・Systematization of luminosity groups and color tone groups. Unified to a simple standard. ・Corresponding to a use requiring high reliability in cars etc… ・Spatial distribution characteristics. (2θ1/2 : 120deg) ・Lead–free soldering compatible ・RoHS compliant : : : : : : 470nm (VUB) 530nm (VUG) , 562nm(VYBG) 572nm (VYPY) 590nm (VFY) 605nm (VFA) 615nm (VFV) , 626nm (VFR) Dominant wavelength Blue Green Yellow Green Yellow Orange Red Spatial distribution 120 deg. Die materials VUB,VUG : InGaN Optical efficiency VUB : 4.4lm/W VYBG : 1.9lm/W VFY : 15.0lm/W VFV : 18.4lm/W Rank grouping parameter Sorted by luminous intensity and wavelength and taped according to rank. Assembly methods (customer) Corresponding to surface mounter. Soldering methods Corresponding to reflow soldering and manual soldering. Taping dimensions 2,000pcs(standard) per reel in a 8mm width tape. Reel diameter : φ180mm ESD AlGaInP:2kV (HBM) VYBG, VYPY, VFY, VFA, VFV, VFR :AlGaInP VUG : 17.6lm/W VYPY : 7.1lm/W VFA : 15.0lm/W VFR : 13.8lm/W InGaN:1kV (HBM) Recommended Applications SW lighting for car indicators, meter panel, car audio and heater control, etc… 2006.7.31 Page 1 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Color Variations and Luminous Intensity Part No. Material VUB1104B InGaN VUG1104B InGaN Emitted Color Lens Color Blue (Ta=25℃) Dominant Wavelength Luminous Intensity Luminous Flux λ d (nm) Iv (mcd) φ v(mlm) TYP. IF MIN. MAX. IF TYP. IF 470 20 33 150 20 300 20 530 20 120 470 20 1,200 20 562 20 10 47 20 80 20 572 20 33 220 20 300 20 590 20 100 330 20 600 20 605 20 82 270 20 600 20 615 20 120 390 20 700 20 626 20 100 330 20 550 20 Green VYBG1104B AlGaInP VYPY1104B AlGaInP Yellow Green VFY1104B AlGaInP Yellow VFA1104B AlGaInP Orange VFV1104B AlGaInP Water Clear Red VFR1104B AlGaInP ※Note : The luminous intensity(Iv) and dominant wavelength (λd) above are the setup values of the sorting machine. (Tolerance : IV… ±10%, λd ... ±1nm) 2008.11.17 Page 2 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Absolute Maximum Ratings Item Symbol Power Dissipation Forward Current (Ta=25℃) Absolute Maximum Ratings Unit VUB VUG VYBG VYPY VFY VFA VFV VFR Pd 78 78 81 81 81 81 81 81 mW IF 20 20 30 30 30 30 30 30 mA I FRM 50 50 100 100 100 100 100 100 mA ⊿I F 0.4※ 2 0.4※ 2 0.8 0.8 0.8 0.8 0.8 0.8 mA/ ℃ ⊿I FRM 1.0※ 2 1.0※ 2 2.67 2.67 2.67 2.67 2.67 2.67 mA/ ℃ Reverse Voltage VR 5 5 5 5 5 5 5 5 V Operating Temperature Topr -40～+100 ℃ Storage Temperature Tstg -40～+110 ℃ Pulse Forward Current ※ 1 Derating (Ta=72.5℃ or higher) ※1 I FRM Measurement condition : Pulse Width ≦1ms., Duty ≦ 1/ 20. ※2 Temperature Condition: Ta=60℃ or higher. Thermal Characteristics Item Symbol Junction Temperature (MAX.) Thermal Resistance (TYP.) Ratings Unit VUB VUG VYBG VYPY VFY VFA VFV VFR Tj 110 110 110 110 110 110 110 110 ℃ R(th j-a) 350 350 400 400 400 400 400 400 ℃/ W (Junction/ ambient) ※Rth(j-a) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm . 2 2006.3.31 Page 3 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Electro-Optical Characteristics （VUB,VUG) Item Characteristic Ratings Symbol Conditions IF=20mA Forward Voltage (Ta=25℃) Unit VUB VUG TYP. 3.4 3.4 MAX. 3.9 3.9 VF V Reverse Current VR=5V IR MAX. 100 100 μA Peak Wavelength IF=20mA λp TYP. 465 517 nm IF=20mA λd TYP. 470 530 nm IF=20mA ⊿λ TYP. 26 35 nm IF=20mA 2θ1/ 2 TYP. 120 120 deg. Dominant Wavelength Spectral Line Half Width Half Intensity Angle ※Note: The dominant wave length (λd) above is the setup value of the sorting machine. （Tolerance : λd…±1nm） (Ta=25℃) Electro-Optical Characteristics（VYBG, VYPY, VFY, VFA, VFV, VFR) Item Forward Voltage Conditions IF=20mA Characteristic Rating Symbol VYBG VYPY VFY VFA VFV VFR TYP. 2.1 2.1 2.0 2.0 1.9 2.0 MAX. 2.5 2.5 2.5 2.5 2.4 2.5 VF Unit V Reverse Current VR=5V IR MAX. 100 100 100 100 100 100 μA Peak Wavelength IF=20mA λp TYP. 565 575 592 609 624 635 nm IF=20mA λd TYP. 562 572 590 605 615 626 nm IF=20mA ⊿λ TYP. 15 15 15 15 15 15 nm IF=20mA 2θ1/ 2 TYP. 120 120 120 120 120 120 deg. Dominant Wavelength Spectral Line Half Width Half Intensity Angle ※Note: The dominant wave length (λd) above is the setup value of the sorting machine. （Tolerance : λd…±1nm） 2006.10.30 Page 4 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Luminous Intensity Rank (Ta=25℃) Standard Chart（Unit: mcd） Rank A9 AX AY AZ B1 B2 B3 B4 B5 B6 B7 B8 B9 BX BY BZ C1 C2 C3 C4 C5 C6 C7 C8 C9 CX CY CZ IV（mcd） MIN. MAX. 4.7 5.6 5.6 6.8 6.8 8.2 8.2 10 10 12 12 15 15 18 18 22 22 27 27 33 33 39 39 47 47 56 56 68 68 82 82 100 100 120 120 150 150 180 180 220 220 270 270 330 330 390 390 470 470 560 560 680 680 820 820 1,000 VUB VUG VYBG VYPY VFY VFA VFV VFR IF=20mA B1 B7 B7 B8 BZ C1 C2 C1 C2 C2 C4 C5 C6 C6 C7 C8 ※Limited width of luminous intensity rank is from Min.4 rank width. 2008.11.17 Page 5 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Color Tone Groups (λd) (Ta=25℃) ( unit: nm ) Tolerance: +/-1nm 450nm VUB Type 470nm 500nm VUG Type 530nm VUB Type (I F=20mA) A B MIN. 460.0 464.0 MAX. 464.0 468.0 C 468.0 472.0 D 472.0 476.0 VUG Type (I F=20mA) A B MIN. 515.0 520.0 MAX. 520.0 525.0 C 525.0 530.0 D 530.0 535.0 VYBG Type (I F=20mA) B C D MIN. 555.0 558.0 561.0 MAX. 558.0 561.0 564.0 550nm VYBG Type 562nm VYPY Type 572nm VFY Type 590nm 600nm VFA Type 605nm VFV Type 615nm VFR Type 626nm VYPY Type (I F=20mA) A B C MIN. 567.0 570.0 573.0 MAX. 570.0 573.0 576.0 VFY Type (I F=20mA) D E MIN. 586.0 589.0 MAX. 589.0 592.0 F 592.0 595.0 VFA Type (I F=20mA) B C MIN. 600.0 603.0 MAX. 603.0 606.0 D 606.0 609.0 VFV Type (I F=20mA) B C MIN. 613.0 616.0 MAX. 616.0 619.0 D 619.0 622.0 VFR Type (I F=20mA) A B MIN. 620.0 626.0 MAX. 626.0 632.0 C 632.0 638.0 650nm ※Limited width of color tone rank is from Min.3 to Min.4 rank width. (It changes with product.) 2008.9.12 Page 6 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristic Graph （VUB,VUG) Spectral Distribution Spatial Distribution Example Relative Intensity vs. wavelength Condition:IF=20mA Ta=25℃ 1.2 X-direction VUB Condition: Ta=25℃ VUG Relative Intensity 1.0 0.8 0.6 0.4 0.2 0.0 400 450 500 550 600 Wavelength[nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Condition:Ta=25℃ Condition: Ta=25℃ 100 10 VUB,VUG R elative Intensity Forward Current I F (mA) 1.5 1 1.0 0.5 0.1 0.0 0.01 1.5 2.0 2.5 3.0 3.5 Forward Voltage : VF(V) 2004.06.23 4.0 4.5 0 5 10 15 20 25 Forward Current IF(mA) Page 7 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VUB,VUG) Derating Ambient Temp. vs. Relative Intensity Ambient Temp. vs. Maximum Forward Current Repetition Frequency：f ≧50Hz Duty=5% 50 Duty=10% Relative Intensity Maximum Forward Current : I F MAX. (mA) Condition:IF=20mA 10.0 60 40 Duty=20% 30 Duty=50% DC 20 VUB 1.0 VUG 10 0 -40 0.1 -20 0 20 40 60 80 100 120 -40 -20 0 Ambient Temperature : Ta (℃) Dynamic Drive Rating 20 40 60 80 100 Ambient Temp. Ta (℃ ) Pulse Width vs. Maximum Tolerable Peak Current Duty cycle vs. Maximum Forward Current Ambient Temp. : Ta=25℃ IF Peak MAX./IF DC MAX. Maximum Forward Current : IF MAX.(mA) 10 10kHz 1kHz 100Hz 50Hz 1 1 Duty (%) 2008.1.18 10 100 1000 10000 100000 Pulse Width : tw (μs ) Page 8 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VYBG,VYPY) Spectral Distribution Spatial Distribution Example Relative Intensity vs. wavelength Condition:IF=20mA Ta=25℃ 1.2 X-direction VYBG VYPY 560 580 Condition: Ta=25℃ Relative Intensity 1.0 0.8 0.6 0.4 0.2 0.0 500 520 540 600 620 Wavelength[nm] Forward Current vs. Relative Intensity Forward Voltage vs. Forward Current Condition: Ta=25℃ Condition: Ta=25℃ 2.0 Relative Intensity Forward Current I F (mA) 100 10 VYBG VYPY 1.5 VYBG 1.0 VYPY 1 0.5 0.1 1.5 1.7 1.9 2.1 Forward Voltage: VF(V) 2004.06.23 2.3 2.5 0.0 0 10 20 30 40 50 Forward Current : IF (mA) Page 9 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VYBG,VYPY) Derating Ambient Temp. vs. Relative Intensity Ambient Temp. vs. Maximum Forward Current Repetition Frequency：f ≧ 50Hz Maximum Forward Current : I F MAX. (mA) Condition:IF=20mA 10.0 120 Duty=5% 80 Duty=10% 60 Duty=20% Relative Intensity 100 Duty=50% 40 1.0 VYBG VYPY DC 20 0 -40 -20 0 20 40 60 80 100 120 0.1 -40 -20 0 Ambient Temp. : Ta (℃ ) 20 40 60 80 100 120 Ambient Temp. : Ta (℃ ) Pulse Width vs. Maximum Tolerable Peak Current Dynamic Drive Rating Duty cycle vs. Maximum Forward Current Ambient Temp. : Ta=25℃ 10 IF Peak MAX./IF DC MAX. Maximum Forward Current : IF MAX.(mA) 100 10 10kHz 1 100Hz 50Hz 1 1 2004.06.23 1kHz 10 Duty (%) 100 1 10 10 0 1 00 0 1 00 00 1 00 00 0 Pulse Width : tw (μs ) Page 10 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VFY,VFA,VFV,VFR) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition:IF=20mA Ta=25℃ X-direction Relative Intensity Condition: Ta=25℃ Wavelength[nm] Forward Voltage vs. Forward Current Condition: Ta=25℃ 100 Condition: Ta=25℃ 2.0 Relative Intensity Forward Current I F (mA) Forward Current vs. Relative Intensity 10 VFY,VFA,VFV,VFR 1.5 VFY,VFA,VFV,VFR 1.0 1 0.5 0.1 0.0 1.0 1.5 2.0 Forward Voltage : VF(V) 2006.10.30 2.5 3.0 0 10 20 30 Forward Current : IF (mA) Page 11 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VFY,VFA,VFV,VFR) Derating Ambient Temp. vs. Relative Intensity Ambient Temp. vs. Maximum Forward Current Repetition Frequency：f ≧ 50Hz Duty=5% 100 Relative Intensity Maximum Forward Current : I F MAX. (mA) Condition:IF=20mA 10.0 120 Duty=10% 80 Duty=20% 60 Duty=50% 40 VFA 1.0 VFV,VFR VFY DC 20 0 -40 0.1 -20 0 20 40 60 80 100 -40 120 -20 0 Ambient Temp. : Ta (℃ ) 20 40 60 80 100 Ambient Temp. : Ta (℃ ) Pulse Width vs. Maximum Tolerable Peak Current Dynamic Drive Rating Duty cycle vs. Maximum Forward Current 10 10kHz 1 1kHz 100Hz 50Hz 1 1 10 Duty (%) 2006.3.31 Ambient Temp. : Ta=25℃ 10 IF Peak MAX./IF DC MAX. Maximum Forward Current : IF MAX.(mA) 100 100 1 10 100 1000 10000 100000 Pulse Width : tw (μs ) Page 12 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Package Dimensions (Unit: mm) Weight: (36.30)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) Quantity: 2,000pcs/ reel (standard) 2005.9.28 Page 13 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6℃ maximum) Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2004.09.06 350 3 s 1 time (MAX.) (MAX.) (MAX.) Page14 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Reliability Testing Result Reliability Testing Result Applicable Standard Testing Conditions Duration Failure Room Temp. Operating Life EIAJ ED4701/ 100(101) Ta = 25℃, IF = Maxium Rated Current 1,000 h 0/ 20 High Temp. Operating Life EIAJ ED4701/ 100(101) Ta = Maximum Rated Operating Temperature, IF = Derating Value 1,000 h 0/ 20 Low Temp. Operating Life EIAJ ED4701/ 100(101) Ta = -40℃, IF = Maxium Rated Current 1,000 h 0/ 20 Wet High Temp. Operating Life EIAJ ED4701/ 100(102) Ta = 60℃, 90%, IF = Maxium Rated Current 1,000 h 0/ 20 Wet High Temp. Storage Life EIAJ ED4701/ 100(103) Ta = 60℃, 90% 1,000 h 0/ 20 Thermal Shock EIAJ ED4701/ 100(105) Thermal Shock Operating EIAJ ED4701/ 100(105) High Temp. Storage Life EIAJ ED4701/ 200(201) Ta = Maximum Rated Storage Temperature 1,000 h 0/ 20 Low Temp. Storage Life EIAJ ED4701/ 200(202) Ta = Minimum Rated Storage Temperature 1,000 h 0/ 20 Cycled Temp. Humidity Life EIAJ ED4701/ 200(203) Resistance to Reflow Soldering EIAJ ED4701/ 300(301) Electric Static Discharge EIAJ ED4701/ 300(304) C = 100pF, R2 = 1.5KΩ, ±2,000V EIAJ ED4701/ 400(403) 98.1m/ s (10G), 100 ～ 2KHz, 20min, XYZ each direction (ESD)※1 Vibration, Variable Frequency ※1 Reference test Ta = -40℃ ～ Maximum Rated Storage Temperature (each 15min.) Ta = -40℃(off) ～ 85℃ (IF = Derating Value on), (each 15min.) 1,000 cycles 0/ 20 1,000 cycles 0/ 20 Ta = -30℃(2h) ～ 80℃, 95%(2h), 8h/ cycle, IF = Derating Value, 5min on-off Moisture Soak : 30℃, 70%, 72h Preheat : 150 ～ 180℃(120s Max.) Soldering Temp. : 260℃(5s) 30 cycles 0/ 20 Twice 0/ 20 once each polarity 0/ 10 2 2 h 0/ 10 Failure Criteria Items Symbols Conditions Failure criteria Luminous Intensity Iv IF Value of each product Luminous Intensity Testing Min. Value ＜ Spec. Min. Value x 0.5 Forward Voltage VF IF Value of each product Forward Voltage Testing Max. Value ≧ Spec. Max. Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage V Testing Max. Value ≧ Spec. Max. Value x 2.5 Cosmetic Appearance - - Occurrence of notable decoloration, deformation and cracking 2007.8.31 Page 15 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31 Page 16