Suntan ALUMINUM ELECTROLYTIC CAPACITORS ® C H IP TYPE S ER IE S TS13C0 FEATU R E S ‧ Designed for surface mounting on high density circuit board. ‧ Emboss carrier tape packing system is available for automatic insertion. Standard Series Specifications I T E M Operating Temperature Range Voltage Range Capacitance Range Capacitance Tolerance Leakage Current Tan δ S P E R F O R M A N C E Measurement frequency : 120Hz, Temperature : 20℃ Rated voltage (V) 4 6.3 10 Tan δ (MAX) φ4~φ10 0.35 0.26 0.20 φ12.5~φ16 0.42 0.38 0.34 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Load Life Self Life Resistance to Soldering Heat Applicable Standards C H A R A C T E R I S T I C S -40℃ ~ +85℃ 4~100V 0.1~10000μF ±20% at 120Hz, 20℃ Leakage current(φ4~φ10)≤0.01CV or 3μA,, whichever is greater.( After 2 minutes’ application of rated voltage) Leakage current(φ12.5~φ16)≤0.03CV or 4μA,, whichever is greater.( After 1 minutes’ application of rated voltage) Impedance ratio ZT / Z20 (MAX) φ4~φ10 φ12.5~φ16 After 2000 hours’ application of rated voltage at 85℃, capacitors meet the characteristics requirements listed at right Z-25℃ / Z+20℃ Z-40℃ / Z+20℃ Z-25℃ / Z+20℃ Z-40℃ / Z+20℃ 16 0.16 0.30 4 7 15 7 17 25 0.14 0.26 6.3 4 8 5 12 Capacitance Change Tan δ Leakage Current 35 0.12 0.22 10 3 6 4 10 16 2 4 3 8 50 0.12 0.18 25 2 4 2 5 63 0.10 0.14 35 2 3 2 4 100 0.10 0.10 50~100 2 3 2 3 Within ± 20% of initial value (Within ± 25% of initial value for 4V) 200% or less of initial specified value Initial specified value or less After leaving capacitors under no load at 85℃ for 1000 hours, they meet the specified value for load life characteristics listed above. The capacitors shall be kept on the hot plate Capacitance Change Within ± 10% of initial value maintained at 250℃ for 30 seconds. After Tan δ Initial specified value or less removing from the hot plate and restored at room temperature, they meet the characteristics Leakage Current Initial specified value or less requirements listed at right. JIS C-5141 and JIS C-5102. Chip type 1 Voltage mark [6V] represents 6.3V for Ф4~Ф10; *2 *3 [L±0.3] is applicable to Φ6.3×7.7 and Φ8×6.2; [L±0.5] is applicable to Φ8×10.5~Ф10; *4 [L±1.0] is applicable to Φ12.5~Ф16. Re: Date code and series type — 1st digit for Year; 2nd digit for Quarter, 4 quarter codes in one year are 1, 4, 7, O; 3rd character for Series; SS Series = S Suntan® Technology Company Limited ØDxL A B C E±0.2 L 4x5.4 1.8 4.3 4.3 1.0 5.4 5x5.4 2.1 5.3 5.3 1.3 5.4 6.3x5.4 2.4 6.6 6.6 2.2 5.4 Website: www.suntan.com.hk 8x6.2 3.3 8.3 8.3 2.2 6.2 6.3x7.7 2.4 6.6 6.6 2.2 7.7 8x10.5 2.9 8.3 8.3 3.1 10.5 Email: [email protected] 10x10.5/13.5 3.2 10.3 10.3 4.4 10.5/13.5 12.5x13.5 4.7 13.0 13.0 4.4 13.5 Tel: (852) 8202 8782 (mm) 12.5x16 4.7 13.0 13.0 4.4 16.0 16x16.5/21.5 5.5 17.0 17.0 6.7 16.5/21.5 Fax: (852) 8208 6246 Standard size & Maximum permissible ripple current WV Cap.(μF) 4.7 4R7 4 0G 6.3 0J 10 1A 16 1C 25 1E -- -- -- -- -- -- -- -- 10 100 -- -- -- -- -- -- 4×5.4 25 15 150 -- -- -- -- 22 220 -- -- 4×5.4 31 33 330 4×5.4 26 5×5.4 (4×5.4) 5×5.4 (4×5.4) 5×5.4 6.3×5.4 (5×5.4) 6.3×5.4 (5×5.4) 39 (31) 47 (36) 46 62 (52) 71 (55) -5×5.4 (4×5.4) 5×5.4 (4×5.4) 6.3×5.4 (5×5.4) 6.3×5.4 -35 (28) 43 (32) 59 (43) 57 4×5.4 5×5.4 (4×5.4) 6.3×5.4 (5×5.4) 6.3×5.4 (5×5.4) 6.3×5.4 28 39 (28) 57 (40) 68 (44) 74 6.3×5.4 72 6.3×5.4 80 6.3×5.4 94 6.3×5.4 76 6.3×5.4 8 X 6.2 86 200 6.3×5.4 78 6.3×5.4 88 6.3×7.7 135 6.3×7.7 8 x 6.2 8×10.5 6.3 x 7.7 130 91 200 130 215 (150) 135 8×10.5 250 340 (310) 47 470 4×5.4 34 56 560 4×5.4 39 68 680 5×5.4 45 100 101 5×5.4 61 150 151 6.3×5.4 74 220 221 6.3×5.4 82 -5×5.4 (4×5.4) 5×5.4 6.3×5.4 (5×5.4) 6.3×5.4 (5×5.4) -28 (20) 34 52 (35) 63 (42) 6.3×5.4 68 6.3×5.4 82 6.3×5.4 95 6.3×7.7 8 X 6.2 150 250 8×10.5 (6.3×7.7) 8 X 6.2 6.3×5.4 6.3 X 7.7 8 X 6.2 8×10.5 6.3 X 7.7 8×10.5 150 300 8×10.5 280 8×10.5 280 10×10.5 (8×10.5) 300 150 300 8×10.5 10 X 10.5 10×10.5 300 320 380 10×10.5 (8×10.5) 10×10.5 10×10.5 12.5x13.5 10x13.5 420 (330) 450 490 710 550 10×10.5 400 10X13.5 550 12.5X13.5 820 330 331 6.3×7.7 150 470 471 6.3×7.7 150 680 681 8×10.5 300 1000 102 8×10.5 330 10×10.5 (8×10.5) 430 (330) 10×10.5 450 1500 152 10×10.5 450 650 12.5x13.5 750 12.5X16 1000 2200 222 620 480 12.5x13.5 960 10x13.5 700 1650 472 6800 682 850 1350 900 16x21.5 1750 16x21.5 1850 10000 103 12.5x13.5 16x16.5 12.5x16 16x21.5 1300 1050 1450 16x21.5 4700 16x16.5 12.5x16 16x16.5 1150 1000 1350 1450 1650 1250 1450 332 16x16.5 12.5x16 16x16.5 16x21.5 16x21.5 16X16.5 16x21.5 3300 450 650 890 720 1000 900 1400 10 X 13.5 10x13.5 10×10.5 10×10.5 10 X 13.5 12.5x13.5 10x13.5 12.5x16 12.5x13.5 16x16.5 16x21.5 1800 Case Size Ripple Current WV Cap.(μF) 0.1 0.22 0.33 0.47 1 1.5 2.2 1750 35 1V 50 1H 63 1J 100 2A 0R1 R22 R33 R47 010 1R5 2R2 -------- -------- 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 1.0 2.3 3.5 5.0 10 12 15 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 1.0 2.3 3.5 5.0 10 12 15 3.3 3R3 -- -- 4×5.4 18 5×5.4 20 4.7 4R7 -- -- 5×5.4 (4×5.4) 23 (19) 6.3×5.4 (5×5.4) 30 (23) 10 100 5×5.4 (4×5.4) 30 (20) 6.3×5.4 (5×5.4) 34 (27) 6.3×7.7 (6.3×5.4) 55 (34) 22 220 6.3×5.4 54 33 330 6.3×5.4 8 X 6.2 60 130 140 (70) 160 (85) 470 6.3×5.4 8 X 6.2 70 165 10×10.5 (8×10.5) 230 (170) 56 68 560 680 6.3×7.7 6.3×7.7 80 110 60 (120) 85 (65) 90 130 (110) 110 170 8×10.5 6.3×7.7 8×10.5 (6.3×7.7) 47 6.3×5.4 (8 X 6.2) 6.3×7.7 (8 X 6.2) 6.3×7.7 10×10.5 (8×10.5) 6.3×7.7 8×10.5 100 101 8×10.5 (6.3×7.7) 175 (120) 8×10.5 10×10.5 200 240 150 151 220 221 8×10.5 10×10.5 (8×10.5) 220 310 (270) 330 331 10×10.5 350 10×10.5 10×10.5 10×13.5 12.5X13.5 10X13.5 240 320 400 600 420 10×10.5 10×10.5 10×10.5 12.5X13.5 10X13.5 10 x 13.5 12.5X13.5 10X13.5 16X16.5 12.5X16 250 260 280 380 290 310 580 330 820 720 470 471 850 740 16X16.5 950 681 16X16.5 950 16x21.5 1000 1000 102 16x21.5 1300 16x21.5 1000 2200 222 400 600 530 750 560 1100 800 1550 16X16.5 12.5X16 680 10×10.5 12.5X13.5 10X13.5 12.5X13.5 10X13.5 16X16.5 12.5X16 16x21.5 ----4×5.4 6.3×5.4 6.3×5.4 6.3×7.7 (6.3×5.4) (8 X 6.2) 6.3×7.7 (6.3×5.4) (8 X 6.2) 8×10.5 (6.3×7.7) (8 X 6.2) 10×10.5 (8×10.5) ----10 15 20 45 (28) (50) 50 (30) (50) 110 (50) (50) 180 (120) 10×10.5 190 10×10.5 --- --- 12.5X13.5 440 -16X16.5 16x21.5 -700 850 16x21.5 900 Case size Allowable ripple Allowable Ripple (mA ms) at 85℃ 120Hz Frequency coefficient of allowable ripple current Frequency φ4~φ10 Coefficient φ12.5~φ16 0.1~68uF 100~3300uF ~68 uF 100~680 uF 1000~10000 uF 50Hz 0.70 0.85 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 1.00 1.00 300Hz 1.17 1.08 1.35 1.23 1.1 1kHz 1.36 1.2 1.57 1.34 1.13 10kHz~ 1.50 1.30 2.00 1.5 1.15 Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246